{"description":"Documents matching 'applicable compliance'","count":10000,"total_pages":50,"next_page_url":"https://www.federalregister.gov/api/v1/documents?conditions%5Bterm%5D=applicable+compliance&format=json&page=2","results":[{"title":"Small Business Lending Under the Equal Credit Opportunity Act (Regulation B); Extension of Compliance Dates","type":"Rule","abstract":"The Consumer Financial Protection Bureau (CFPB or Bureau) is finalizing its June 18, 2025 interim final rule amending Regulation B to extend the compliance dates set forth in its 2023 small business lending rule, as amended by a 2024 interim final rule, and to make other date-related conforming adjustments.","document_number":"2025-19370","html_url":"https://www.federalregister.gov/documents/2025/10/02/2025-19370/small-business-lending-under-the-equal-credit-opportunity-act-regulation-b-extension-of-compliance","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-10-02/pdf/2025-19370.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-19370.pdf?1759322731","publication_date":"2025-10-02","agencies":[{"raw_name":"Consumer Financial Protection Bureau","name":"Consumer Financial Protection Bureau","id":573,"url":"https://www.federalregister.gov/agencies/consumer-financial-protection-bureau","json_url":"https://www.federalregister.gov/api/v1/agencies/573","parent_id":null,"slug":"consumer-financial-protection-bureau"}],"excerpts":"114—Effective Date, Compliance Date, and Special Transition Rules \n \n 114(b) Compliance Date 1. \n Application of compliance date. \n The applicable compliance date in § 1002.114(b) is the date by which the covered financial institution must begin to compile data as specified in § 1002.107, comply with the firewall requirements of § 1002.108, and begin to maintain records as specified in § 1002.111. In addition, the covered financial institution must comply with § 1002.110(c) and (d) no later than June 1 of the year after the applicable compliance date. For"},{"title":"Effluent Limitations Guidelines and Standards for the Steam Electric Power Generating Point Source Category-Deadline Extensions; Correction","type":"Rule","abstract":"The U.S. Environmental Protection Agency (the EPA or Agency) is issuing a notice to correct some of the deadlines listed in the final rule, \"Effluent Limitations Guidelines and Standards for the Steam Electric Generating Point Source Category-- Deadline Extensions,\" which published in the Federal Register on December 31, 2025. After publication, the EPA became aware of post- signature typographical errors in the published regulatory text concerning compliance deadlines for pretreatment standards and related reporting recordkeeping requirements in the rule. This correction will ensure that the rule's compliance deadlines and reporting and recordkeeping deadlines match those in the version of the rule signed by the EPA Administrator.","document_number":"2026-01913","html_url":"https://www.federalregister.gov/documents/2026/01/30/2026-01913/effluent-limitations-guidelines-and-standards-for-the-steam-electric-power-generating-point-source","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2026-01-30/pdf/2026-01913.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2026-01913.pdf?1769694320","publication_date":"2026-01-30","agencies":[{"raw_name":"ENVIRONMENTAL PROTECTION AGENCY","name":"Environmental Protection Agency","id":145,"url":"https://www.federalregister.gov/agencies/environmental-protection-agency","json_url":"https://www.federalregister.gov/api/v1/agencies/145","parent_id":null,"slug":"environmental-protection-agency"}],"excerpts":"Extensions,” which published in the \n Federal Register \n on December 31, 2025. After publication, the EPA became aware of post-signature typographical errors in the published regulatory text concerning compliance deadlines for pretreatment standards and related reporting recordkeeping requirements in the rule. This correction will ensure that the rule's compliance deadlines and reporting and recordkeeping deadlines match those in the version of the rule signed by the EPA Administrator.\n \n \n \n DATES: \n Effective on March 2, 2026. \n \n \n ADDRESSES: \n \n The"},{"title":"Methylene Chloride; Regulation Under the Toxic Substances Control Act (TSCA); Compliance Date Extension","type":"Rule","abstract":"The Environmental Protection Agency (EPA or Agency) is finalizing an extension to the compliance dates applicable to certain entities subject to the regulation of methylene chloride promulgated under the Toxic Substances Control Act (TSCA). Specifically, EPA is finalizing an 18-month extension of the Workplace Chemical Protection Program (WCPP) and associated recordkeeping compliance dates for industrial or commercial laboratories that are not owned or operated by Federal agencies or contractors acting on behalf of the Federal government. Under this final rule, all non-Federal laboratories will share the same compliance dates with Federal and Federally contracted laboratories. EPA is finalizing an extension of the compliance dates for associated laboratory activities detailed in this final rule to avoid disruption of important functions of non-Federal laboratories such as the use of environmental monitoring methods needed for cleanup sites and wastewater treatment, as well as activities associated with university laboratories or law enforcement laboratories.","document_number":"2025-19881","html_url":"https://www.federalregister.gov/documents/2025/11/13/2025-19881/methylene-chloride-regulation-under-the-toxic-substances-control-act-tsca-compliance-date-extension","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-11-13/pdf/2025-19881.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-19881.pdf?1762955113","publication_date":"2025-11-13","agencies":[{"raw_name":"ENVIRONMENTAL PROTECTION AGENCY","name":"Environmental Protection Agency","id":145,"url":"https://www.federalregister.gov/agencies/environmental-protection-agency","json_url":"https://www.federalregister.gov/api/v1/agencies/145","parent_id":null,"slug":"environmental-protection-agency"}],"excerpts":"This amendment aligns the compliance dates for non-Federally owned or operated industrial or commercial laboratories with the compliance dates established in the 2024 risk management rule for Federal agencies and their contractors (Ref. 2). Specifically, this final rule extends three compliance dates for non-Federally owned or operated industrial or commercial laboratories. For initial monitoring, the compliance date is extended from May 5, 2025, to November 9, 2026. For establishing regulated areas and ensuring compliance with the Existing Chemical"},{"title":"Small Business Lending Under the Equal Credit Opportunity Act (Regulation B); Extension of Compliance Dates","type":"Rule","abstract":"In light of court orders in ongoing litigation, the Consumer Financial Protection Bureau (CFPB or Bureau) is amending Regulation B to extend the compliance dates set forth in its 2023 small business lending rule, as amended by a 2024 interim final rule, and to make other date-related conforming adjustments.","document_number":"2025-11244","html_url":"https://www.federalregister.gov/documents/2025/06/18/2025-11244/small-business-lending-under-the-equal-credit-opportunity-act-regulation-b-extension-of-compliance","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-06-18/pdf/2025-11244.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-11244.pdf?1750164319","publication_date":"2025-06-18","agencies":[{"raw_name":"Consumer Financial Protection Bureau","name":"Consumer Financial Protection Bureau","id":573,"url":"https://www.federalregister.gov/agencies/consumer-financial-protection-bureau","json_url":"https://www.federalregister.gov/api/v1/agencies/573","parent_id":null,"slug":"consumer-financial-protection-bureau"}],"excerpts":"114—Effective Date, Compliance Date, and Special Transition Rules \n 114(b) Compliance Date \n \n 1. \n Application of compliance date. \n The applicable compliance date in § 1002.114(b) is the date by which the covered financial institution must begin to compile data as specified in § 1002.107, comply with the firewall requirements of § 1002.108, and begin to maintain records as specified in § 1002.111. In addition, the covered financial institution must comply with § 1002.110(c) and (d) no later than June 1 of the year after the applicable compliance date. For"},{"title":"Agency Information Collection Activities Under OMB Review","type":"Notice","abstract":"In compliance with the Paperwork Reduction Act of 1995 (\"PRA\"), this notice announces that the Information Collection Request (\"ICR\") abstracted below has been forwarded to the Office of Information and Regulatory Affairs (\"OIRA\"), of the Office of Management and Budget (\"OMB\"), for review and comment. The ICR describes the nature of the information collection and its expected costs and burden.","document_number":"2025-13246","html_url":"https://www.federalregister.gov/documents/2025/07/15/2025-13246/agency-information-collection-activities-under-omb-review","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-07-15/pdf/2025-13246.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-13246.pdf?1752497119","publication_date":"2025-07-15","agencies":[{"raw_name":"COMMODITY FUTURES TRADING COMMISSION","name":"Commodity Futures Trading Commission","id":77,"url":"https://www.federalregister.gov/agencies/commodity-futures-trading-commission","json_url":"https://www.federalregister.gov/api/v1/agencies/77","parent_id":null,"slug":"commodity-futures-trading-commission"}],"excerpts":"have not expired as of the date of enactment of that Act, and “transition swap” as any swap entered into on or after the enactment of the Dodd-Frank Act of 2010 (July 21, 2010) and prior to the applicable compliance date on which a registered entity or swap counterparty subject to the jurisdiction of the Commission is required to commence full compliance with all provisions of part 46).\n \n \n \n An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control"},{"title":"Airworthiness Directives; Baykar Piaggio Aerospace S.p.A. (Type Certificate Previously Held by Piaggio Aviation S.p.A.) Airplanes","type":"Rule","abstract":"The FAA is adopting a new airworthiness directive (AD) for certain Baykar Piaggio Aerospace S.p.A. (type certificate previously held by Piaggio Aviation S.p.A.) (Piaggio) Model P-180 airplanes. This AD was prompted by reports of corrosion and cracks affecting the vertical stabilizer. This AD requires repetitive visual and non- destructive testing (NDT) inspections, a one-time NDT inspection of the vertical stabilizer assembly, and, depending on findings, accomplishment of corrective actions. In addition, this AD provides a terminating action for the repetitive inspections if certain actions of the service material are accomplished. The FAA is issuing this AD to address the unsafe condition on these products.","document_number":"2026-06599","html_url":"https://www.federalregister.gov/documents/2026/04/06/2026-06599/airworthiness-directives-baykar-piaggio-aerospace-spa-type-certificate-previously-held-by-piaggio","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2026-04-06/pdf/2026-06599.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2026-06599.pdf?1775220311","publication_date":"2026-04-06","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Federal Aviation Administration","name":"Federal Aviation Administration","id":159,"url":"https://www.federalregister.gov/agencies/federal-aviation-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/159","parent_id":492,"slug":"federal-aviation-administration"}],"excerpts":"integrity of the vertical stabilizer and the rudder with consequent reduced control of the airplane. \n (f) Compliance \n Comply with this AD within the compliance times specified, unless already done. \n (g) Required Actions \n (1) Within the applicable compliance time specified in table 1 to paragraph (g)(1) of this AD and thereafter at intervals not to exceed 660 hours time-in-service (TIS) or 26 months, whichever occurs first, do the applicable repetitive visual and non-destructive testing (NDT) inspections of the parts of the vertical stabilizer assembly"},{"title":"Extension of Compliance Dates for Electronic Submission of Certain Materials Under the Securities Exchange Act of 1934; Amendments Regarding the FOCUS Report","type":"Rule","abstract":"The Securities and Exchange Commission (\"Commission\") is extending by twelve months the compliance dates for certain of the rule amendments the Commission adopted on December 16, 2024, regarding the electronic submission of certain materials under the Securities Exchange Act of 1934 (\"Exchange Act\") and amendments to the FOCUS Report (Form X-17A-5), a periodic financial and operational report filed by broker-dealers and security-based swap dealers.","document_number":"2025-17402","html_url":"https://www.federalregister.gov/documents/2025/09/10/2025-17402/extension-of-compliance-dates-for-electronic-submission-of-certain-materials-under-the-securities","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-09-10/pdf/2025-17402.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-17402.pdf?1757421916","publication_date":"2025-09-10","agencies":[{"raw_name":"SECURITIES AND EXCHANGE COMMISSION","name":"Securities and Exchange Commission","id":466,"url":"https://www.federalregister.gov/agencies/securities-and-exchange-commission","json_url":"https://www.federalregister.gov/api/v1/agencies/466","parent_id":null,"slug":"securities-and-exchange-commission"}],"excerpts":"advance of the applicable compliance date in order to be fully in compliance by that date. As a result, some firms may incur operational costs in order to meet the compliance dates in the Adopting Release, including purchasing software and making staffing changes or entering contracts with third-party service providers.\n 26 \n \n Providing immediate certainty that these compliance dates are extended is therefore needed to allow firms to avoid incurring unnecessary burdens and other challenges associated with meeting the initial compliance dates of the"},{"title":"Laboratory Accreditation for Analyses of Foods; Program Implementation; Determination of Sufficient Laboratory Capacity for Import-Related Food Testing Covered by the Regulation","type":"Rule","abstract":"The Food and Drug Administration (FDA or we) has determined that there is sufficient laboratory capacity in the Laboratory Accreditation for Analyses of Foods (LAAF) program for the import- related food testing covered by the LAAF regulation for mycotoxins. As sufficient capacity is reached for additional analytes covered under the import-related food testing provisions of the LAAF regulation, those specific analytes and compliance dates will be posted on the LAAF Dashboard. Owners and consignees of imported food subject to the LAAF regulation must use a LAAF-accredited laboratory to conduct covered import-related food testing starting on the applicable compliance date, which is 6 months from the date a specific analyte is listed on a public registry, based on FDA's determination that sufficient laboratory capacity has been achieved for such analyte. FDA has not yet made a capacity determination for the other food testing circumstances covered by the LAAF regulation.","document_number":"2024-12027","html_url":"https://www.federalregister.gov/documents/2024/06/03/2024-12027/laboratory-accreditation-for-analyses-of-foods-program-implementation-determination-of-sufficient","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2024-06-03/pdf/2024-12027.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2024-12027.pdf?1717159516","publication_date":"2024-06-03","agencies":[{"raw_name":"DEPARTMENT OF HEALTH AND HUMAN SERVICES","name":"Health and Human Services Department","id":221,"url":"https://www.federalregister.gov/agencies/health-and-human-services-department","json_url":"https://www.federalregister.gov/api/v1/agencies/221","parent_id":null,"slug":"health-and-human-services-department"},{"raw_name":"Food and Drug Administration","name":"Food and Drug Administration","id":199,"url":"https://www.federalregister.gov/agencies/food-and-drug-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/199","parent_id":221,"slug":"food-and-drug-administration"}],"excerpts":"capacity is reached for additional analytes covered under the import-related food testing provisions of the LAAF regulation, those specific analytes and compliance dates will be posted on the LAAF Dashboard. Owners and consignees of imported food subject to the LAAF regulation must use a LAAF-accredited laboratory to conduct covered import-related food testing starting on the applicable compliance date, which is 6 months from the date a specific analyte is listed on a public registry, based on FDA's determination that sufficient laboratory capacity"},{"title":"Airworthiness Directives; Baykar Piaggio Aerospace S.p.A. (Type Certificate Previously Held by Piaggio Aviation S.p.A.) Airplanes","type":"Proposed Rule","abstract":"The FAA proposes to adopt a new airworthiness directive (AD) for certain Baykar Piaggio Aerospace S.p.A. (type certificate previously held by Piaggio Aviation S.p.A.) (Piaggio) Model P-180 airplanes. This proposed AD was prompted by reports of corrosion and cracks affecting the vertical stabilizer. This proposed AD would require repetitive visual and non-destructive testing (NDT) inspections, a one-time NDT inspection of the vertical stabilizer assembly, and, depending on findings, accomplishment of corrective actions. In addition, this AD would provide a terminating action for the repetitive inspections. The FAA is proposing this AD to address the unsafe condition on these products.","document_number":"2026-01048","html_url":"https://www.federalregister.gov/documents/2026/01/21/2026-01048/airworthiness-directives-baykar-piaggio-aerospace-spa-type-certificate-previously-held-by-piaggio","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2026-01-21/pdf/2026-01048.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2026-01048.pdf?1768916714","publication_date":"2026-01-21","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Federal Aviation Administration","name":"Federal Aviation Administration","id":159,"url":"https://www.federalregister.gov/agencies/federal-aviation-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/159","parent_id":492,"slug":"federal-aviation-administration"}],"excerpts":"integrity of the vertical stabilizer and the rudder with consequent reduced control of the airplane. \n (f) Compliance \n Comply with this AD within the compliance times specified, unless already done. \n (g) Required Actions \n (1) Within the applicable compliance time specified in table 1 to paragraph (g)(1) of this AD and thereafter at intervals not to exceed 660 hours time-in-service (TIS) or 26 months, whichever occurs first, do the applicable repetitive visual and non-destructive testing (NDT) inspections of the parts of the vertical stabilizer assembly"},{"title":"Airworthiness Directives; Austro Engine GmbH Engines","type":"Rule","abstract":"The FAA is superseding Airworthiness Directive (AD) 2023-20-03 for certain Austro Engine GmbH Model E4 and E4P engines. AD 2023-20-03 required repetitive engine oil analysis for aluminum content outside the acceptable limits and, if necessary, replacement of the pistons, piston rings, con-rods assembly, and crankcase or, as an alternative, replacement of the engine core. Since the FAA issued AD 2023-20-03, the manufacturer identified errors in the lists of affected engines and provided updated information, which prompted this AD. This AD retains the requirements of AD 2023-20-03, adds compliance times for additional affected engine serial numbers, and removes certain engine serial numbers from the applicability of the existing AD. The FAA is issuing this AD to address the unsafe condition on these products.","document_number":"2025-03010","html_url":"https://www.federalregister.gov/documents/2025/02/25/2025-03010/airworthiness-directives-austro-engine-gmbh-engines","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-02-25/pdf/2025-03010.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-03010.pdf?1740404707","publication_date":"2025-02-25","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Federal Aviation Administration","name":"Federal Aviation Administration","id":159,"url":"https://www.federalregister.gov/agencies/federal-aviation-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/159","parent_id":492,"slug":"federal-aviation-administration"}],"excerpts":"replacement; as applicable, of Austro MSB-E4-039/3. \n (5) For Group 3 and Group 4 engines, within the applicable compliance times specified in table 3 to paragraph (g)(5) of this AD, replace the pistons, piston rings, and con-rods assembly, or replace the engine core in accordance with paragraph 2., Technical Details, Engine core replacement; or Pistons, piston rings and con-rod assy replacement, as applicable, of Austro MSB-E4-039/3. \n \n \n Table 3 to Paragraph (\n g \n )(5)—Replacement for Group 3 and 4 Engines\n \n \n Engine group \n Compliance time \n \n "},{"title":"Renewable Fuel Standard (RFS) Program: Partial Waiver of 2024 Cellulosic Biofuel Volume Requirement and Extension of 2024 Compliance Deadline","type":"Proposed Rule","abstract":"EPA is proposing to partially waive the 2024 cellulosic biofuel volume requirement and revise the associated percentage standard under the Renewable Fuel Standard (RFS) program due to a shortfall in cellulosic biofuel production. As a result of this proposed change, this action also proposes to extend the RFS compliance reporting deadline for the 2024 compliance year. This action also proposes several minor revisions related to the biogas provisions of the RFS program.","document_number":"2024-28978","html_url":"https://www.federalregister.gov/documents/2024/12/12/2024-28978/renewable-fuel-standard-rfs-program-partial-waiver-of-2024-cellulosic-biofuel-volume-requirement-and","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2024-12-12/pdf/2024-28978.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2024-28978.pdf?1733924725","publication_date":"2024-12-12","agencies":[{"raw_name":"ENVIRONMENTAL PROTECTION AGENCY","name":"Environmental Protection Agency","id":145,"url":"https://www.federalregister.gov/agencies/environmental-protection-agency","json_url":"https://www.federalregister.gov/api/v1/agencies/145","parent_id":null,"slug":"environmental-protection-agency"}],"excerpts":"indefinitely extend the compliance reporting deadline for a compliance year with already established RFS standards.\n \n \n \n 60 \n We note that under any of these scenarios, the applicable compliance reporting deadline in 40 CFR 80.1451(f)(1)(i)(A) or (B) of this section would apply if it were later than the proposed extension (\n e.g., \n the deadline would be no earlier than March 31 of the subsequent calendar year or the next quarterly reporting deadline after the annual compliance reporting deadline for the prior compliance year).\n \n \n \n Essentially"},{"title":"Airworthiness Directives; The Boeing Company Airplanes","type":"Rule","abstract":"The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -200PF series airplanes. This AD was prompted by a crack growth analysis, which indicated that current inspections are not adequate to detect cracks in certain sections of the upper frame at the frame splice between certain stringers before a single frame fails. This AD requires an inspection or records review for existing repairs, repetitive inspections for cracks of the upper frame at the frame splices between certain stringers in certain sections, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.","document_number":"2024-28782","html_url":"https://www.federalregister.gov/documents/2024/12/09/2024-28782/airworthiness-directives-the-boeing-company-airplanes","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2024-12-09/pdf/2024-28782.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2024-28782.pdf?1733492723","publication_date":"2024-12-09","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Federal Aviation Administration","name":"Federal Aviation Administration","id":159,"url":"https://www.federalregister.gov/agencies/federal-aviation-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/159","parent_id":492,"slug":"federal-aviation-administration"}],"excerpts":"structural element to sustain limit loads, and could adversely affect the structural integrity of the airplane. \n (f) Compliance \n Comply with this AD within the compliance times specified, unless already done. \n (g) Required Actions \n Except as specified by paragraph (h) of this AD: At the applicable times specified in the “Compliance” paragraph of Boeing Alert Requirements Bulletin 757-53A0115 RB, dated January 25, 2022, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Alert Requirements Bulletin"},{"title":"Airworthiness Directives; Ontic Engineering and Manufacturing, Inc. Airplanes (Type Certificate Previously Held by M7 Aerospace LLC)","type":"Proposed Rule","abstract":"The FAA proposes to adopt a new airworthiness directive (AD) for certain Ontic Engineering and Manufacturing, Inc. Model SA226-T, SA226-AT, SA226-T(B), SA226-TC, SA227-AC (C-26A), SA227-AT, SA227-BC (C-26A), SA227-CC, SA227-DC (C-26B), and SA-227-TT (300) airplanes. This proposed AD was prompted by reports of in-flight pitch trim actuator failures. This proposed AD would require repetitively inspecting the pitch trim actuator for cracked, missing, or compromised sealant, replacing and sealing the pitch trim actuator if cracked, missing, or compromised, repetitively measuring the pitch trim actuator travel time, and depending on the results of the measurements, replacing and sealing the pitch trim actuator. This proposed AD would prohibit the installation of certain pitch trim actuators unless the pitch trim actuator is sealed. The FAA is proposing this AD to address the unsafe condition on these products.","document_number":"2026-06459","html_url":"https://www.federalregister.gov/documents/2026/04/02/2026-06459/airworthiness-directives-ontic-engineering-and-manufacturing-inc-airplanes-type-certificate","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2026-04-02/pdf/2026-06459.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2026-06459.pdf?1775047523","publication_date":"2026-04-02","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Federal Aviation Administration","name":"Federal Aviation Administration","id":159,"url":"https://www.federalregister.gov/agencies/federal-aviation-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/159","parent_id":492,"slug":"federal-aviation-administration"}],"excerpts":"failure and consequent reduced control of the airplane. \n (f) Compliance \n Comply with this AD within the compliance times specified, unless already done. \n (g) Definitions \n For the purpose of this AD: \n (1) A new part is a pitch trim actuator with zero-hours time-in-service (TIS). \n (2) An overhauled part is a pitch trim actuator that has zero hours TIS since the last overhaul. \n (h) Required Actions for Model Group 1 Airplanes \n (1) For all affected airplanes, at whichever compliance time in paragraph (h)(1)(i) or (ii) of this AD occurs later,"},{"title":"Change in Rates of General Applicability for Competitive Products","type":"Notice","abstract":"This notice sets forth time-limited changes in rates of general applicability for competitive products.","document_number":"2026-06025","html_url":"https://www.federalregister.gov/documents/2026/03/30/2026-06025/change-in-rates-of-general-applicability-for-competitive-products","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2026-03-30/pdf/2026-06025.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2026-06025.pdf?1774615510","publication_date":"2026-03-30","agencies":[{"raw_name":"POSTAL SERVICE","name":"Postal Service","id":410,"url":"https://www.federalregister.gov/agencies/postal-service","json_url":"https://www.federalregister.gov/api/v1/agencies/410","parent_id":null,"slug":"postal-service"}],"excerpts":"prc.gov \n .\n \n \n Jeffrey Boblick, \n Attorney, Ethics and Legal Compliance. \n \n Decision of the Governors of the United States Postal Service on Changes in Rates of General Applicability for Competitive Products (Governors' Decision No. 26-1) \n March 24, 2026 \n Statement of Explanation and Justification \n \n Pursuant to authority under section 3632 of title 39, as amended by the Postal Accountability and Enhancement Act of 2006 (“PAEA”), we establish new prices of general applicability for certain domestic shipping services (competitive products),"},{"title":"Certificates of Compliance; Correction","type":"Rule","abstract":"On January 8, 2025, in consultation with U.S. Customs and Border Protection (CBP), the U.S. Consumer Product Safety Commission (Commission or CPSC) issued a final rule to revise the agency's regulation for Certificates of Compliance (certificates). The final rule contained two \"effective dates\" for products subject to the final rule based on how products were manufactured or imported into the United States. CPSC is making a technical correction to the DATES section of the final rule because the Office of the Federal Register requires one \"effective date.\" The corrected final rule will contain one \"effective date\" for the final rule and two \"applicability dates\" based on how products are manufactured or imported into the United States. This technical correction has no substantive effect on the dates by which products subject to the final rule must be in compliance.","document_number":"2025-18521","html_url":"https://www.federalregister.gov/documents/2025/09/24/2025-18521/certificates-of-compliance-correction","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-09-24/pdf/2025-18521.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-18521.pdf?1758631516","publication_date":"2025-09-24","agencies":[{"raw_name":"CONSUMER PRODUCT SAFETY COMMISSION","name":"Consumer Product Safety Commission","id":84,"url":"https://www.federalregister.gov/agencies/consumer-product-safety-commission","json_url":"https://www.federalregister.gov/api/v1/agencies/84","parent_id":null,"slug":"consumer-product-safety-commission"}],"excerpts":"the final rule to contain one effective date, July 8, 2026, and two applicability dates. For all CPSC regulated consumer products and substances subject to the final rule that are required to be certified, except for products imported through a foreign trade zone (FTZ), the final rule is applicable on July 8, 2026. For CPSC regulated products and substances imported into a foreign trade zone (FTZ) and subsequently entered for consumption or warehousing, the final rule is applicable on January 8, 2027. Accordingly, this correction has no substantive"},{"title":"Agency Information Collection Activities: Notice of Intent To Extend Collection 3038-0089: Swap Data Recordkeeping and Reporting Requirements: Pre-Enactment and Transition Swaps","type":"Notice","abstract":"The Commodity Futures Trading Commission (\"Commission\" or \"CFTC\") is announcing an opportunity for public comment on the proposed renewal of a collection of certain information by the agency. Under the Paperwork Reduction Act (\"PRA\"), Federal agencies are required to publish notice in the Federal Register concerning each proposed collection of information, including each proposed extension of an existing collection of information, and to allow 60 days for public comment. This notice solicits comments on reporting requirements relating to swap data recordkeeping and reporting requirements codified in 17 CFR 46. This part imposes recordkeeping and reporting requirements on the following entities: Swap Dealers (\"SDs\"), Major Swap Participants (\"MSPs\"), and swap counterparties that are neither swap dealers nor major swap participants (\"non-SD/MSP counterparties\").","document_number":"2025-08141","html_url":"https://www.federalregister.gov/documents/2025/05/09/2025-08141/agency-information-collection-activities-notice-of-intent-to-extend-collection-3038-0089-swap-data","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-05-09/pdf/2025-08141.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-08141.pdf?1746708318","publication_date":"2025-05-09","agencies":[{"raw_name":"COMMODITY FUTURES TRADING COMMISSION","name":"Commodity Futures Trading Commission","id":77,"url":"https://www.federalregister.gov/agencies/commodity-futures-trading-commission","json_url":"https://www.federalregister.gov/api/v1/agencies/77","parent_id":null,"slug":"commodity-futures-trading-commission"}],"excerpts":"have not expired as of the date of enactment of that Act, and “transition swap” as any swap entered into on or after the enactment of the Dodd-Frank Act of 2010 (July 21, 2010) and prior to the applicable compliance date on which a registered entity or swap counterparty subject to the jurisdiction of the Commission is required to commence full compliance with all provisions of part 46).\n \n \n • Whether the proposed collection of information is necessary for the proper performance of the functions of the Commission, including whether the information"},{"title":"EPA Determinations of Compliance and Applicability Under Clean Air Act Section 111, 112, and 129 Dashboard: EPA Formal Responses to Inquiries Concerning Compliance With the Clean Air Act Stationary Source Program (Since May 2019)","type":"Notice","abstract":"This document announces the availability of applicability determinations, alternative monitoring decisions, and regulatory interpretations made by the Environmental Protection Agency (EPA) with regard to the New Source Performance Standards (NSPS); the National Emission Standards for Hazardous Air Pollutants (NESHAP); the Emission Guidelines and Federal Plan Requirements for existing sources; and/or the Stratospheric Ozone Protection Program.","document_number":"2025-19988","html_url":"https://www.federalregister.gov/documents/2025/11/17/2025-19988/epa-determinations-of-compliance-and-applicability-under-clean-air-act-section-111-112-and-129","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2025-11-17/pdf/2025-19988.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2025-19988.pdf?1763127919","publication_date":"2025-11-17","agencies":[{"raw_name":"ENVIRONMENTAL PROTECTION AGENCY","name":"Environmental Protection Agency","id":145,"url":"https://www.federalregister.gov/agencies/environmental-protection-agency","json_url":"https://www.federalregister.gov/api/v1/agencies/145","parent_id":null,"slug":"environmental-protection-agency"}],"excerpts":"Documents for Compliance Assistance page of the CAA Compliance Monitoring website under “Air” at: \n https://www.epa.gov/complying-air-emissions-standards-stationary-sources/epa-determinations-compliance-and. \n All previously issued responses are posted on the Applicability Determination Index (ADI) data system available on the internet through the Resources and Guidance Documents for Compliance Assistance page of the CAA Compliance Monitoring website under “Air” at: \n https://www.epa.gov/compliance/resources-and-guidance-documents-compliance-assistance"},{"title":"Self-Regulatory Organizations; The Nasdaq Stock Market LLC; Order Granting Approval of a Proposed Rule Change, as Modified by Amendment No. 2, To Modify the Application of Bid Price Compliance Periods","type":"Notice","abstract":null,"document_number":"2024-23535","html_url":"https://www.federalregister.gov/documents/2024/10/11/2024-23535/self-regulatory-organizations-the-nasdaq-stock-market-llc-order-granting-approval-of-a-proposed-rule","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2024-10-11/pdf/2024-23535.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2024-23535.pdf?1728564328","publication_date":"2024-10-11","agencies":[{"raw_name":"SECURITIES AND EXCHANGE COMMISSION","name":"Securities and Exchange Commission","id":466,"url":"https://www.federalregister.gov/agencies/securities-and-exchange-commission","json_url":"https://www.federalregister.gov/api/v1/agencies/466","parent_id":null,"slug":"securities-and-exchange-commission"}],"excerpts":"notification to achieve compliance. Compliance can be achieved during any compliance period by meeting the applicable standard for a minimum of 10 consecutive business days during the applicable compliance period, unless Staff exercises its discretion to extend this 10 day period as discussed in Rule 5810(c)(3)(H).” Rules 5810(c)(3)(A)(i) and (ii) also provide an additional 180 day compliance period for companies listed on Capital Markets, or Global Select or Global Market that transfer to Capital Markets, that are not in compliance with the bid price"},{"title":"Self-Regulatory Organizations; The Nasdaq Stock Market LLC; Notice of Filing of Proposed Rule Change To Modify the Application of Bid Price Compliance Periods","type":"Notice","abstract":null,"document_number":"2024-15038","html_url":"https://www.federalregister.gov/documents/2024/07/09/2024-15038/self-regulatory-organizations-the-nasdaq-stock-market-llc-notice-of-filing-of-proposed-rule-change","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2024-07-09/pdf/2024-15038.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2024-15038.pdf?1720442734","publication_date":"2024-07-09","agencies":[{"raw_name":"SECURITIES AND EXCHANGE COMMISSION","name":"Securities and Exchange Commission","id":466,"url":"https://www.federalregister.gov/agencies/securities-and-exchange-commission","json_url":"https://www.federalregister.gov/api/v1/agencies/466","parent_id":null,"slug":"securities-and-exchange-commission"}],"excerpts":"to regain compliance with the Bid Price Requirement of Rule 5550(a)(2) while at the same time causing non-compliance with the minimum Publicly Held Shares requirement of Rule 5550(a)(4). Under Nasdaq's current rules, Nasdaq would notify the company about this new deficiency and the company would be afforded 45 calendar days to submit a plan to regain compliance and could be afforded up to 180 calendar days to regain compliance.\n 8 \n \n \n \n \n 6 \n \n See \n Rule 5810(c)(3)(A) providing that a company achieves compliance during any compliance period by"},{"title":"Airworthiness Directives; Austro Engine GmbH Engines","type":"Proposed Rule","abstract":"The FAA proposes to supersede Airworthiness Directive (AD) 2023-20-03, which applies to certain Austro Engine GmbH Model E4 and E4P engines. AD 2023-20-03 requires repetitive engine oil analysis for aluminum content outside the acceptable limits and, if necessary, replacement of the pistons, piston rings, con-rods assembly, and crankcase or, as an alternative, replacement of the engine core. Since the FAA issued AD 2023-20-03, the manufacturer identified errors in the lists of affected engines and provided updated information, which prompted this proposed AD. This proposed AD would retain the requirements of AD 2023-20-03, add compliance times for additional affected engine serial numbers, and remove certain engine serial numbers from the applicability of the existing AD. The FAA is proposing this AD to address the unsafe condition on these products.","document_number":"2024-22064","html_url":"https://www.federalregister.gov/documents/2024/09/30/2024-22064/airworthiness-directives-austro-engine-gmbh-engines","pdf_url":"https://www.govinfo.gov/content/pkg/FR-2024-09-30/pdf/2024-22064.pdf","public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2024-22064.pdf?1727441119","publication_date":"2024-09-30","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Federal Aviation Administration","name":"Federal Aviation Administration","id":159,"url":"https://www.federalregister.gov/agencies/federal-aviation-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/159","parent_id":492,"slug":"federal-aviation-administration"}],"excerpts":"replacement; as applicable, of Austro MSB-E4-039/3.\n \n (5) For Group 3 and Group 4 engines, within the applicable compliance times specified in Table 3 to paragraph (g)(5) of this AD, replace the pistons, piston rings, and con-rods assembly, or replace the engine core in accordance with paragraph 2., Technical Details, Engine core replacement; or Pistons, piston rings and con-rod assy replacement, as applicable, of Austro MSB-E4-039/3. \n \n \n Table 3 to Paragraph (\n g \n )(5)—Replacement for Group 3 and 4 Engines\n \n \n Engine group \n Compliance time \n \n "}]}