{"abstract":"We are publishing a new airworthiness directive (AD) for Sikorsky Aircraft Corporation Model S-76A, S-76B, S-76C, and S-76D helicopters, which was sent previously to all known U.S. owners and operators of these helicopters. This AD requires inspecting the main rotor (M/R) and tail rotor (T/R) pushrod assemblies and the jamnuts, and applying slippage marks across the pushrod tubes and jamnuts. This AD is prompted by an accident of a Sikorsky Aircraft Corporation Model S-76C helicopter. During preliminary investigation, a failed pushrod assembly was identified. These actions are intended to prevent loss of M/R or T/R flight control and subsequent loss of control of the helicopter.","action":"Final rule; request for comments.","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Federal Aviation Administration","name":"Federal Aviation Administration","id":159,"url":"https://www.federalregister.gov/agencies/federal-aviation-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/159","parent_id":492,"slug":"federal-aviation-administration"}],"body_html_url":"https://www.federalregister.gov/documents/full_text/html/2015/10/26/2015-26949.html","cfr_references":[{"chapter":null,"citation_url":null,"part":"39","title":14}],"citation":"80 FR 65128","comment_url":null,"comments_close_on":null,"correction_of":null,"corrections":[],"dates":"This AD becomes effective November 10, 2015 to all persons except those persons to whom it was made immediately effective by Emergency AD 2015-19-51, issued on September 14, 2015, which contains the requirements of this AD.","disposition_notes":null,"docket_ids":["Docket No. FAA-2015-3940","Directorate Identifier 2015-SW-065-AD","Amendment 39-18300","AD 2015-19-51"],"dockets":[{"supporting_documents":[],"agency_name":null,"documents":[{"comment_count":0,"comment_start_date":"2015-10-26","updated_at":"2023-03-01T13:20:36.365-05:00","comment_url":"https://www.regulations.gov/commenton/FAA-2015-3940-0001","allow_late_comments":null,"id":"FAA-2015-3940-0001","comment_end_date":"2015-12-29","regulations_dot_gov_open_for_comment":false}],"supporting_documents_count":null,"id":"FAA-2015-3940","title":"2015-SW-065-AD Sikorsky Aircraft Corporation Model S-76A, S-76B, S-76C, and S-76D helicopters, to require inspecting the rotor servo input control pushrod assemblies and jamnuts, and applying slippage marks across the pushrod tubes and jamnuts."}],"document_number":"2015-26949","effective_on":"2015-11-10","end_page":65130,"executive_order_notes":null,"executive_order_number":null,"full_text_xml_url":"https://www.federalregister.gov/documents/full_text/xml/2015/10/26/2015-26949.xml","html_url":"https://www.federalregister.gov/documents/2015/10/26/2015-26949/airworthiness-directives-sikorsky-aircraft-corporation-helicopters","images":{},"images_metadata":{},"json_url":"https://www.federalregister.gov/api/v1/documents/2015-26949?publication_date=2015-10-26","mods_url":"https://www.govinfo.gov/metadata/granule/FR-2015-10-26/2015-26949/mods.xml","not_received_for_publication":null,"page_length":3,"page_views":{"count":226,"last_updated":"2026-11-22 14:15:04 -0500"},"pdf_url":"https://www.govinfo.gov/content/pkg/FR-2015-10-26/pdf/2015-26949.pdf","presidential_document_number":null,"proclamation_number":null,"public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2015-26949.pdf?1445604332","publication_date":"2015-10-26","raw_text_url":"https://www.federalregister.gov/documents/full_text/text/2015/10/26/2015-26949.txt","regulation_id_number_info":{"2120-AA64":{"issue":"202504","html_url":"https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives","title":"Airworthiness Directives","xml_url":"http://www.reginfo.gov/public/do/eAgendaViewRule?pubId=202504&RIN=2120-AA64&operation=OPERATION_EXPORT_XML","priority_category":"Routine and Frequent"}},"regulation_id_numbers":["2120-AA64"],"regulations_dot_gov_info":{"supporting_documents":[],"regulatory_plan":{"html_url":"https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives","title":"Airworthiness Directives"},"comments_count":0,"agency_id":"FAA","comments_url":"https://www.regulations.gov/docketBrowser?rpp=50&so=DESC&sb=postedDate&po=0&dct=PS&D=FAA-2015-3940","supporting_documents_count":null,"docket_id":"FAA-2015-3940","document_id":"FAA-2015-3940-0001","regulation_id_number":"2120-AA64","title":"2015-SW-065-AD Sikorsky Aircraft Corporation Model S-76A, S-76B, S-76C, and S-76D helicopters, to require inspecting the rotor servo input control pushrod assemblies and jamnuts, and applying slippage marks across the pushrod tubes and jamnuts.","checked_regulationsdotgov_at":"2023-03-01T18:20:35Z"},"regulations_dot_gov_url":null,"significant":false,"signing_date":null,"start_page":65128,"subtype":null,"title":"Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters","toc_doc":"Sikorsky Aircraft Corporation Helicopters","toc_subject":"Airworthiness Directives:","topics":["Air transportation","Aircraft","Aviation safety","Incorporation by reference","Safety"],"type":"Rule","volume":80}