{"abstract":"PHMSA is amending the Federal Pipeline Safety Regulations that govern the use of plastic piping systems in the transportation of natural and other gas. These amendments are necessary to enhance pipeline safety, adopt innovative technologies and best practices, and respond to petitions from stakeholders. The changes include increasing the design factor of polyethylene pipe; increasing the maximum pressure and diameter for Polyamide-11 pipe and components; allowing the use of Polyamide-12 pipe and components; new standards for risers, more stringent standards for plastic fittings and joints; stronger mechanical fitting requirements; the incorporation by reference of certain new or updated consensus standards for pipe, fittings, and other components; the qualification of procedures and personnel for joining plastic pipe; the installation of plastic pipe; and a number of general provisions.","action":"Final rule.","agencies":[{"raw_name":"DEPARTMENT OF TRANSPORTATION","name":"Transportation Department","id":492,"url":"https://www.federalregister.gov/agencies/transportation-department","json_url":"https://www.federalregister.gov/api/v1/agencies/492","parent_id":null,"slug":"transportation-department"},{"raw_name":"Pipeline and Hazardous Materials Safety Administration","name":"Pipeline and Hazardous Materials Safety Administration","id":408,"url":"https://www.federalregister.gov/agencies/pipeline-and-hazardous-materials-safety-administration","json_url":"https://www.federalregister.gov/api/v1/agencies/408","parent_id":492,"slug":"pipeline-and-hazardous-materials-safety-administration"}],"body_html_url":"https://www.federalregister.gov/documents/full_text/html/2018/11/20/2018-24925.html","cfr_references":[{"chapter":null,"citation_url":null,"part":192,"title":49}],"citation":"83 FR 58694","comment_url":"https://www.regulations.gov/commenton/PHMSA-2014-0098-0062","comments_close_on":null,"correction_of":null,"corrections":[],"dates":"The effective date of these amendments is January 22, 2019. The incorporation by reference of certain publications listed in the rule is approved by the Director of the Federal Register as of January 22, 2019.","disposition_notes":null,"docket_ids":["Docket No. PHMSA-2014-0098: Amdt. No. 192-124"],"dockets":[{"supporting_documents":[{"title":"Plastic Pipe - Regulatory Impact Analysis and Initial Regulatory Flexibility Act Analysis","document_id":"PHMSA-2014-0098-0006"},{"title":"Plastic Pipe - Environmental Assessment","document_id":"PHMSA-2014-0098-0005"},{"title":"Gas Piping Technology Committee -  Petition","document_id":"PHMSA-2014-0098-0004"},{"title":"Evonik-Degussa Corporation and UBE Industries - Amended Joint Petition","document_id":"PHMSA-2014-0098-0003"},{"title":"Arkema Inc. - Petition to Amend","document_id":"PHMSA-2014-0098-0002"}],"agency_name":"PHMSA","documents":[{"comment_count":0,"comment_start_date":"2018-11-20","updated_at":"2024-11-13T13:25:30.168-05:00","comment_url":"https://www.regulations.gov/commenton/PHMSA-2014-0098-0062","allow_late_comments":true,"id":"PHMSA-2014-0098-0062","comment_end_date":null,"regulations_dot_gov_open_for_comment":false}],"supporting_documents_count":5,"id":"PHMSA-2014-0098","title":"Plastic Pipe Rule"}],"document_number":"2018-24925","effective_on":"2019-01-22","end_page":58720,"executive_order_notes":null,"executive_order_number":null,"explanation":null,"full_text_xml_url":"https://www.federalregister.gov/documents/full_text/xml/2018/11/20/2018-24925.xml","html_url":"https://www.federalregister.gov/documents/2018/11/20/2018-24925/pipeline-safety-plastic-pipe-rule","images":{"ER20NO18.000":{"large":"https://img.federalregister.gov/ER20NO18.000/ER20NO18.000_large.png","original_size":"https://img.federalregister.gov/ER20NO18.000/ER20NO18.000_original_size.png"}},"images_metadata":{"ER20NO18.000":{"large":{"identifier":"ER20NO18.000","content_type":"image/png","size":3804,"width":225,"sha":"5ccc3eaa83d5e6614b852c8b3bf18cf5","url":"https://img.federalregister.gov/ER20NO18.000/ER20NO18.000_large.png","height":185},"original_size":{"identifier":"ER20NO18.000","content_type":"image/png","size":6831,"width":801,"sha":"db930a913e4339f8083bb5ff7a70d7e9","url":"https://img.federalregister.gov/ER20NO18.000/ER20NO18.000_original_size.png","height":660}}},"json_url":"https://www.federalregister.gov/api/v1/documents/2018-24925?publication_date=2018-11-20","mods_url":"https://www.govinfo.gov/metadata/granule/FR-2018-11-20/2018-24925/mods.xml","not_received_for_publication":null,"page_length":27,"page_views":{"count":23539,"last_updated":"2026-04-05 02:15:03 -0400"},"pdf_url":"https://www.govinfo.gov/content/pkg/FR-2018-11-20/pdf/2018-24925.pdf","presidential_document_number":null,"proclamation_number":null,"public_inspection_pdf_url":"https://public-inspection.federalregister.gov/2018-24925.pdf?1542635119","publication_date":"2018-11-20","raw_text_url":"https://www.federalregister.gov/documents/full_text/text/2018/11/20/2018-24925.txt","regulation_id_number_info":{"2137-AE93":{"issue":"201810","html_url":"https://www.federalregister.gov/regulations/2137-AE93/pipeline-safety-issues-related-to-the-use-of-plastic-pipe-in-gas-pipeline-industry","title":"Pipeline Safety: Issues Related to the Use of Plastic Pipe in Gas Pipeline Industry","xml_url":"http://www.reginfo.gov/public/do/eAgendaViewRule?pubId=201810&RIN=2137-AE93&operation=OPERATION_EXPORT_XML","priority_category":"Other Significant"}},"regulation_id_numbers":["2137-AE93"],"regulations_dot_gov_info":{"supporting_documents":[{"title":"Plastic Pipe - Regulatory Impact Analysis and Initial Regulatory Flexibility Act Analysis","document_id":"PHMSA-2014-0098-0006"},{"title":"Plastic Pipe - Environmental Assessment","document_id":"PHMSA-2014-0098-0005"},{"title":"Gas Piping Technology Committee -  Petition","document_id":"PHMSA-2014-0098-0004"},{"title":"Evonik-Degussa Corporation and UBE Industries - Amended Joint Petition","document_id":"PHMSA-2014-0098-0003"},{"title":"Arkema Inc. - Petition to Amend","document_id":"PHMSA-2014-0098-0002"}],"regulatory_plan":{"html_url":"https://www.federalregister.gov/regulations/2137-AE93/pipeline-safety-issues-related-to-the-use-of-plastic-pipe-in-gas-pipeline-industry","title":"Pipeline Safety: Issues Related to the Use of Plastic Pipe in Gas Pipeline Industry"},"comments_count":0,"agency_id":"PHMSA","comments_url":"https://www.regulations.gov/docketBrowser?rpp=50&so=DESC&sb=postedDate&po=0&dct=PS&D=PHMSA-2014-0098","supporting_documents_count":5,"docket_id":"PHMSA-2014-0098","document_id":"PHMSA-2014-0098-0062","regulation_id_number":"2137-AE93","title":"Plastic Pipe Rule","checked_regulationsdotgov_at":"2024-11-13T21:55:09Z"},"regulations_dot_gov_url":"https://www.regulations.gov/commenton/PHMSA-2014-0098-0062","significant":true,"signing_date":null,"start_page":58694,"subtype":null,"title":"Pipeline Safety: Plastic Pipe Rule","toc_doc":"Plastic Pipe Rule","toc_subject":"Pipeline Safety:","topics":["Incorporation by reference","Pipeline safety","Security measures"],"type":"Rule","volume":83}