Skip to Content
Notice

Certain New Chemicals; Receipt and Status Information

Action

Notice.

Summary

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 26, 2007 to April 27, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

 

Table of Contents Back to Top

Tables Back to Top

DATES: Back to Top

Comments identified by the specific PMN number or TME number, must be received on or before June 18, 2007.

ADDRESSES Back to Top

:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2007-0394, by one of the following methods.

  • Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
  • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
  • Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID number EPA-HQ-OPPT-2007-0394. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the Docket's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2007-0394. EPA's policy is that all comments received will be included in the public docket without change and may be made available online at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/epahome/dockets.htm.

Docket: All documents in the docket are listed in the docket's index available in regulations.gov. To access the electronic docket, go to http://www.regulations.gov, select “Advanced Search,” then “Docket Search.” Insert the docket ID number where indicated and select the “Submit” button. Follow the instructions on the regulations.gov web site to view the docket index or access available documents. Although listed in the index, some information is not publicly available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone numberof the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: Back to Top

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION: Back to Top

I. General Information Back to Top

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is claimed CBI). In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions. The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at the estimate.

vi. Provide specific examples to illustrate your concerns, and suggested alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action? Back to Top

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 26, 2007 to April 27, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs Back to Top

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 80 Premanufacture Notices Received From: 03/26/07 to 04/27/07 Back to Top
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
P-07-0319 03/26/07 06/23/07 CBI (G) Raw material for polymer paint additive (G) Alkylamino alcohol
P-07-0326 03/26/07 06/23/07 CBI (G) Paint additive (G) Polyurethane
P-07-0327 03/26/07 06/23/07 CBI (G) Antioxidant (G) Ncs 1: Substituted phenol
P-07-0328 03/26/07 06/23/07 CBI (G) Antioxidant (G) Ncs 2: Substituted phenol
P-07-0329 03/26/07 06/23/07 CIBA Specialty Chemicals Corporation (G) Ultra violet stabilizer for coatings (G) Derivative of 2,4-dihydroxy benzophenone
P-07-0330 03/28/07 06/25/07 3M Company (G) Film coating additive (G) Surface modified ceramic materials and wares, chemicals
P-07-0331 03/28/07 06/25/07 CBI (S) Hardener for architectural coatings; hardener for metal primers for maintenance coatings (G) 1,2-ethanediamine, N 1-(2-aminoethyl)-, reaction products with glycidyl aromatic ether
P-07-0332 03/28/07 06/25/07 3M Company (G) Surface modifier (G) Alkyloxy carboxylic acid
P-07-0333 03/29/07 06/26/07 CBI (G) Open non-dispersive resin (G) Aromatic isocyanate prepolymer
P-07-0334 03/28/07 06/25/07 Cytec Industries Inc. (G) Coatings resin (G) Acrylated aliphatic polyurethane
P-07-0335 03/30/07 06/27/07 CBI (G) Adhesive for electrical parts (G) Epoxy resin
P-07-0336 04/02/07 06/30/07 The Dow Chemical Company (G) One-component foaming adhesives and sealants for roofing and construction (G) Polymeric mdi prepolymer based on poly(oxyethylene-co-oxypropylene) triol and amine initiated tetrol
P-07-0337 04/02/07 06/30/07 CBI (G) Open non-dispersive (sizing agent) (G) Polyester polyurethane
P-07-0338 04/02/07 06/30/07 CBI (G) Open non-dispersion (coatings) (G) Aliphatic polyurethane resin
P-07-0339 03/29/07 06/26/07 Ashland Inc., Environmental Health and Safety (G) Ink, coating, adhesive (G) Polyacrylate oligomer product from base-catalyzed reaction of dipropylene gylcol diacrylate, genomer 3364 amine-modified polyacrylate, ethoxylated trimethylol propane triacrylate and .beta.-ketoester
P-07-0340 03/29/07 06/26/07 Ashland Inc., Environmental Health and Safety (G) Ink, coating, adhesive (G) Polyacrylate oligomer product from base-catalyzed reaction of 1,6-hexanediol diacrylate, genomer 3364 amine-modified polyacrylate, ethoxylated trimethylol propane triacrylate and .beta.-ketoester
P-07-0341 03/29/07 06/26/07 Ashland Inc., Environmental Health and Safety (G) Ink, coating, adhesive (G) Polyacrylate oligomer product from base-catalyzed reaction of dipropylene gylcol diacrylate, ebecryl 81 amine-modified polyacrylate, ethoxylated trimethylol propane triacrylate and .beta.-ketoester
P-07-0342 03/29/07 06/26/07 Ashland Inc., Environmental Health and Safety (G) Ink, coating, adhesive (G) Polyacrylate oligomer product from base-catalyzed reaction of 1,6-hexanediol diacrylate, ebecryl 81 amine-modified polyacrylate, ethoxylated trimethylol propane triacrylate and .beta.-ketoester
P-07-0343 03/29/07 06/26/07 Ashland Inc., Environmental Health and Safety (G) Ink, coating, adhesive (G) Polacrylate oligomer product from base-catalyzed reaction of dipropylene gylcol diacrylate, genomer 3364 amine-modified polyacrylate, ethoxylated trimethylol propane triacrylate and .beta.-ketoester
P-07-0344 03/29/07 06/26/07 Ashland Inc., Environmental Health and Safety (G) Ink, coating, adhesive (G) Polyacrylate oligomer product from base-catalyzed reaction of ethoxylated 1,6-hexanediol diacrylate, genomer 3364 amine-modified polyacrylate, ethoxylated trimethylol propane triacrylate and .beta.-ketoester
P-07-0345 04/02/07 06/30/07 CBI (G) Component of manufactured consumer article-contained use (G) Spiro[isobenzofuran-1(3 H),polyheterocycle]-3-one, 3′-[(4-fluoro-2-methylphenyl)amino]-6′-[(2-fluorophenyl)amino]-
P-07-0346 03/29/07 06/26/07 Shin-etsu Silicones of America Inc. (S) Additive of adhesives for building materials (S) Siloxanes and silicones, hydroxy me 3-hydroxypropyl me, me (1-oxododecyl)oxy, esters with C 12-20 fatty acids, esters with polyethylene-polypropylene glycol mono-bu ether
P-07-0347 04/02/07 06/30/07 CBI (S) Organic synthesis intermediate (G) Spiro[isobenzofuran-1(3h),polyheterocycle]-3-one, 3′-chloro-6′-[(4-fluoro-2-methylphenyl)amino]-
P-07-0348 04/03/07 07/01/07 CBI (G) Packaging (G) Copolymer based on sulfonic acid monomer
P-07-0349 04/03/07 07/01/07 3M (G) Fluorinated additive for polymers (G) Fluorinated alkylammonium salt
P-07-0350 04/03/07 07/01/07 Incorez Corporation (S) Binder, coating or modifying resin used in the manufacture of coatings for wood, plastic and cementitous substrates (G) Aqueous aliphatic anionio polyunethane dispersion
P-07-0351 04/04/07 07/02/07 CBI (G) Component of manufactured consumer article - contained use (G) Carbomonocycle, bis[(4-methylphenoxy)methyl]-
P-07-0352 04/04/07 07/02/07 CBI (G) Coating component (G) Modified polymer of substituted acrylate and alkyl methacrylates
P-07-0353 04/05/07 07/03/07 3M Company (G) Chemical intermediate (G) Alkyl acid fluoride
P-07-0354 04/05/07 07/03/07 E.I. Dupont De Nemours (S) Industrial intermediate (G) N-methyl- (amino,chloro,methyl) carbomonocyclic carbamide
P-07-0355 04/05/07 07/03/07 E.I. Dupont De Nemours (S) Industrial intermediate (G) 3-bromo-1-(3-chloro-2-pyridinyl)-1 H-pyrazole derivative
P-07-0356 04/04/07 07/02/07 CBI (G) Coating resin for open, non-dispersive use (G) Polymer with aliphatic diisocyanates, polycarbonatediol and bishydroxymethylproionic acid
P-07-0357 04/05/07 07/03/07 Crosslink Energy Materials, LLC (S) Conductive coating for electrical capacitors (G) Polyaniline emeraldine salt
P-07-0358 04/09/07 07/07/07 CBI (G) Open non dispersive use (G) Hexitol, anhydro-, bis[[(1-oxo-2-propenyl)oxy]benzoate], polymer with phenylene bis[[(1-oxo-2-propenyl)oxy]alkyl(C 1-C 10)oxy benzoate]
P-07-0359 04/09/07 07/07/07 CBI (G) An open non-dispersive use (G) Halide of unsaturated alkyl hydrocarbon
P-07-0360 04/09/07 07/07/07 Danisco US, Inc. (S) Hydrolysis of phytate (G) Phytase
P-07-0361 04/10/07 07/08/07 Alberdingk boley Inc. (S) For wood coatings (G) Linseed oil, ester with pentaerythritol, polymer with hydrazine, 3-hydroxy-2-(hydroxymethyl)2-methylpropanoic acid, 5-isocyanato-1-(isocyanatomethyl)-alkylcychexane, 1,1′- methylenebis [4.isocyanatocyclohexane] and polypropylene glycol,compounds with triethylamine
P-07-0362 04/10/07 07/08/07 Dupont Company (S) Production of molded articles/parts; production of filaments; production of extruded articles (G) Butylene phthalate(poly-1,3-propyleneoxide) phthalate copolymer
P-07-0363 04/10/07 07/08/07 Dupont Company (S) Production of molded articles/parts; production of filaments; production of extruded articles (G) Butylene phthalate(poly-1,3-propyleneoxide) phthalate copolymer
P-07-0364 04/10/07 07/08/07 Dupont Company (S) Production of molded articles/parts; production of filaments; production of extruded articles (G) Butylene phthalate(poly-1,3-propyleneoxide) phthalate copolymer
P-07-0365 04/10/07 07/08/07 Dupont Company (S) Production of molded articles/parts; production of filaments; production of extruded articles (G) Butylene phthalate(poly-1,3-propyleneoxide) phthalate copolymer
P-07-0366 04/10/07 07/08/07 CBI (S) Precursor for use in semiconductor processing (G) Metal alkyl amide
P-07-0367 04/10/07 07/08/07 CBI (G) Lubricant additive (G) Fluorinated zinc dialkyldthiophosphate
P-07-0368 04/04/07 07/02/07 Henkel Corporation (G) Adhesive component (G) Phenol, substituted-, polymer with substituted oxirane and substituted thiol
P-07-0369 04/10/07 07/08/07 Robertet, Inc. (S) As an odoriferous component of fragrance compounds (S) Oils, poplar, populus nigra
P-07-0370 04/11/07 07/09/07 CBI (G) Catalyst of polyurethane foam manufacture (G) Glycol phosphite
P-07-0372 04/12/07 07/10/07 CBI (S) Colorant in thermoplastics (G) Amine derivative of ci pigment yellow 138
P-07-0373 04/12/07 07/10/07 CBI (S) Colorant in thermoplastics (G) Counterion of sulfonated ci pigment yellow 138
P-07-0374 04/12/07 07/10/07 CBI (S) Colorant in thermoplastics; colorant in coatings/paints (G) Oligomeric hindered amine derivative of ci pigment yellow 138
P-07-0375 04/12/07 07/10/07 J.M. Huber Corporation (S) Flame retardant (G) Aluminum trihydrate surface treated
P-07-0376 04/12/07 07/10/07 Boulder Scientific Company (S) Chemical intermediate (S) 1,2-cyclohexanedicarboxylic acid, (1 r,2 r)-re-
P-07-0377 04/12/07 07/10/07 Neste Oil (S) Renewable diesel fuel to be blended with conventional diesel (G) Alkanes, branched and linear
P-07-0378 04/13/07 07/11/07 Renosol Systems, L.L.C. (S) Reactive component in a polyol mixture subsequently reacted with an isocyanate to mold polyurethane foam; reactive component in a polyol mixture sold with an isocyanate to mold polyurethane articles. (G) Methylenebisisocyanatocarbomonocycle, reaction product with polyalkyloxirane and oligomeric hydroxyalkenyl ester
P-07-0379 04/16/07 07/14/07 Henkel Corporation (S) A polymerizable component of adhesive and sealant formulations (S) Ethanol, 2,2′,2′′-nitrilotris-, polymer with .alpha.-hydro-.omega.-hydroxypoly(oxy-1,4-butanediyl) and 1,1′-methylenebis[4-isocyanatocyclohexane], 2-hydroxyethyl acrylate-blocked
P-07-0380 04/16/07 07/14/07 CBI (G) Intermediate in the manufacture of hot melt adhesives. (S) Fatty acids, C 18-unsaturated, dimers, polymers with ethylenediamine, 12-hydroxyoctadecanoic acid, 4-methyl-1,3-dioxolan-2-one, piperazine, polypropylene glycol diamine and stearic acid
P-07-0381 04/16/07 07/14/07 CBI (G) Intermediate in the manufacture of hot melt adhesives. (S) Fatty acids, C 18-unsaturated, dimers, polymers with ethylenediamine, 12-hydroxyoctadecanoic acid, 4-methyl-1,3-dioxolan-2-one, piperazine, polypropylene glycol diamine and tall-oil fatty acids
P-07-0382 04/16/07 07/14/07 CBI (G) Intermediate in the manufacture of hot melt adhesives. (S) Fatty acids, C 18-unsaturated, dimers, polymers with ethylenediamine, 12-hydroxyoctadecanoic acid, 4-methyl-1,3-dioxolan-2-one, piperazine, polypropylene glycol diamine, sebacic acid and stearic acid
P-07-0383 04/16/07 07/14/07 CBI (G) Intermediate in the manufacture of hot melt adhesives. (S) Fatty acids, C 18-unsaturated, dimers, polymers with ethylenediamine, 12-hydroxyoctadecanoic acid, 4-methyl-1,3-dioxolan-2-one, piperazine, polypropylene glycol diamine, sebacic acid and tall-oil fatty acids
P-07-0384 04/16/07 07/14/07 CBI (G) Intermediate in the manufacture of hot melt adhesives. (S) Fatty acids, C 18-unsaturated, dimers, hydrogenated, polymers with ethylenediamine, 12-hydroxyoctadecanoic acid, 4-methyl-1,3-dioxolan-2-one, piperazine, polypropylene glycol diamine and stearic acid
P-07-0385 04/16/07 07/14/07 CBI (G) Intermediate in the manufacture of hot melt adhesives. (S) Fatty acids, C 18-unsaturated, dimers, polymers with ethylenediamine, hexamethylenediamine, 12-hydroxyoctadecanoic acid, 4-methyl-1,3-dioxolan-2-one, piperazine, polypropylene glycol diamine and stearic acid
P-07-0386 04/17/07 07/15/07 CBI (G) Catalyst: dispersive use (G) Heteropolycycle alkyl ether sulfate salt
P-07-0387 04/17/07 07/15/07 Wacker chemical Corporation (S) Textile softner; note 1-2% of the new polymer will be in consumer product from the 100% formulated at the industrial sites (S) polydimethylsilozxane hydroxyalkyl terminated, polymers with diisocyanate and aminodlkyl groups alphatic amine
P-07-0388 04/17/07 07/15/07 Wacker Chemical Corporation (S) Textile softner (G) Polydimethylsiloxane hydroxyalkyl terminated, polymers with diisocyanate and aminoalkyl groups aliphatic amine blocked, acetates
P-07-0389 04/17/07 07/15/07 Henkel Corporation (S) A polymerizable component in adhesive and selant formulations (G) Trialkenyl substituted cyclic alkane
P-07-0390 04/18/07 07/16/07 CBI (G) Defoamer (G) Silicone polyglycol ether
P-07-0391 04/18/07 07/16/07 CBI (G) Open, non-dispersive (resin) (G) Polyurethane-polyurea resin
P-07-0392 04/18/07 07/16/07 CBI (G) Exterior can coating (G) Modified epoxy resin
P-07-0393 04/19/07 07/17/07 Forbo Adhesives, LLC (G) Hot melt adhesive (G) Isocyanate functional polyester urethane polymer
P-07-0394 04/20/07 07/18/07 CBI (G) Mineral dispersion processing aid (G) Alkoxy siloxane
P-07-0395 04/23/07 07/21/07 CBI (S) An ingredient for production of halo-substituted organic compounds (G) Dialkyl formamide
P-07-0396 04/20/07 07/18/07 Colonial Chemical, Inc. (S) Drilling mud additive (S) 1,3-propanediaminium, 2-hydroxy-N, N′-bis(2-hydroxyethyl)-N,N,N′,N′-teramethyl-, dichloride
P-07-0397 04/23/07 07/21/07 CBI (S) Coupling agent for filled polyolefin; compatibilizer for polyolefin blends with engineering plastics (G) Maleic anhydride grafted polyolein
P-07-0398 04/23/07 07/21/07 CBI (G) Stabilizer (G) Oligomeric aliphatic diisocyanate
P-07-0399 04/24/07 07/22/07 CBI (G) Component of foam (G) Fatty acid polymer with aliphatic diol and aromatic
P-07-0400 04/24/07 07/22/07 CBI (G) Open non-dispersive (coating material) (G) Aliphatic polyurethane resin
P-07-0401 04/24/07 07/22/07 Scientific polymer products, Inc. (G) Matrix for analysis device; open, non-dispersive use. (S) 2-propenoic acid, 2-methyl, 2-hydroxyethyl ester, homopolymer
P-07-0402 04/20/07 07/18/07 CBI (G) Additive for polymers (G) Alkylphenoxy naphthalic acid amide, N-alkylphenyl-
P-07-0403 04/25/07 07/23/07 Struktol Company of America (S) Lubricant for nylon and plastic (G) Adipamide
P-07-0404 04/25/07 07/23/07 CBI (G) Pigment for ink (G) Substituted quinacridone, substituted phthalimidomethyl derivatives
P-07-0405 04/25/07 07/23/07 CBI (G) Pigment for ink (G) Substituted quinacridone, aminophthalimidomethyl derivatives
P-07-0406 04/26/07 07/24/07 CBI (G) A destructive use in energy production. (S) Benzenesulfonic acid, C 10-16-alkyl derivates, reaction products with aluminum hydroxide oxide (a1(oh)o)
P-07-0407 04/26/07 07/24/07 CBI (G) Component of foam (G) Fatty acid polymer with aliphatic diol and aromatic diacid

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TME received:

II. 1 Test Marketing Exemption Notices Received From: 03/26/07 to 04/27/07 Back to Top
Case No. Received Date Projected Notice End Date Manufacturer/Importer Use Chemical
T-07-0012 03/30/07 05/13/07 Cytec Industries Inc. (G) Coatings resin (G) Acrylated aliphatic polyurethane

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 42 Notices of Commencement From: 03/26/07 to 04/27/07 Back to Top
Case No. Received Date Commencement Notice End Date Chemical
P-00-1051 04/10/07 03/29/07 (G) Polyol fatty acid ester
P-01-0862 04/17/07 03/21/07 (G) Ethoxylated alkylsulfate, substituted alkylamine salt
P-02-0228 03/30/07 03/02/07 (G) dioxaspriro(4,5)-decane, 8,8-dimethyl -(1-metlethyl)
P-02-0604 04/23/07 04/07/07 (G) Acrylic copolymer
P-04-0369 04/09/07 03/29/07 (G) Ketoester
P-06-0021 04/02/07 03/27/07 (G) Substituted metallized organic dye
P-06-0220 04/18/07 03/18/07 (G) Methacrylic acid, polymer with acrylic and methacrylic acid derivatives
P-06-0232 04/20/07 04/06/07 (G) Substituted polyaryl sulfonium compound
P-06-0429 04/13/07 04/05/07 (G) Polyoxyalkylene siloxane
P-06-0435 04/13/07 04/01/07 (G) Hydridosiloxane
P-06-0478 04/23/07 03/22/07 (G) Fluoroalkyl acrylate copolymer
P-06-0524 04/25/07 03/29/07 (S) Propanesulfonic acid, 1(or 2)-hydroxy-, monosodium salt
P-06-0538 04/03/07 03/30/07 (G) Alkyl substituted pyridone azo anthraquinone compound
P-06-0549 03/28/07 03/13/07 (G) Quaternized styrene polymer
P-06-0550 03/28/07 03/13/07 (G) Quaternized styrene polymer
P-06-0665 04/09/07 03/27/07 (G) Alkenedioic acid, dialkyl ester, reaction products with polyaminocarbomonocycle and alkenoic acid alkyl ester
P-06-0673 04/23/07 04/13/07 (G) Silylated polymer
P-06-0695 04/25/07 04/20/07 (G) Isocyanate terminated adduct of polymeric isocyanate with an amine silane
P-06-0724 04/04/07 03/02/07 (S) Butanamide, 2-ethyl-N-methyl-N-(3-methylphenyl)-
P-06-0737 04/24/07 04/13/07 (G) Substituted melamine
P-06-0746 04/04/07 03/02/07 (S) Pyridine, 2-(2,4-dimethylcyclohexyl)-
P-06-0756 04/23/07 04/05/07 (G) 2-propenoic acid, 2-methyl-, 2-(dimethylamino)ethyl ester, polymer wiyh alkyl 2-propenoate, ethenylbenzene and 2-hydroxyethyl 2-propenoate, acetate (salt) formate (salt)
P-06-0763 03/28/07 03/07/07 (S) Aspartic acid, N-[(1 S)-1,2-dicarboxyethyl]-3-hydroxy-, tetrasodium salt
P-06-0766 04/10/07 03/15/07 (G) Sodium, bis((substituted)-(sulfonatocarbocycleamino)-triazine-yl]amino)-sulfonatostilbene
P-06-0781 03/27/07 03/09/07 (G) Substituted disbasic ester
P-06-0804 04/18/07 03/27/07 (G) Polyurethane prepolymer
P-07-0021 04/04/07 04/02/07 (G) Phenol, 2,4-bis(1,1-branched alkyl)-, phosphate (3:1)
P-07-0050 04/04/07 03/15/07 (G) Polyester polyurethane resin based on 1,5-naphthylene diisocyanate.
P-07-0059 04/05/07 03/22/07 (G) Cyclic acrylic polymer, peroxide initiated
P-07-0078 03/26/07 03/05/07 (G) Acrylic polymer salt with vinyl compound, salts
P-07-0088 04/10/07 03/30/07 (G) Tdi/ppg ether prepolymer
P-07-0099 04/02/07 03/25/07 (G) Substituted carbopolycycle, polymer with substituted alkane and trialkylene glycol, substituted epoxy alkyl ester
P-07-0104 04/05/07 03/02/07 (G) Mixed esters of diacids with alcohols and acid-alcohols
P-07-0124 04/02/07 03/26/07 (S) Siloxanes and silicones, di-me, 3-(2-hydroxyethoxy)??propyl group-terminated, polymers with 5-amino-1,3,3-trimethylcyclohexanemethanamine, di-et carbonate, 1,6-hexanediol and 1,1′-methylenebis[4-isocyanatocyclohexane], me et ketone oxime-blocked
P-07-0127 03/23/07 03/19/07 (G) Acrylic copolymer
P-07-0140 04/23/07 03/26/07 (G) Quino [2,3-b]acridine-7,14-dione, 5,12-dihydro-ar-[4-[[2-(sulfooxy)ethyl]substituted]phenyl]-, monosodium salt
P-07-0142 04/25/07 03/28/07 (G) Amine modified phenol formaldehyde polymer
P-07-0150 04/10/07 03/29/07 (G) Dimer fatty acid based polyester polyurethane
P-07-0151 04/24/07 04/12/07 (G) Arylacrylate
P-07-0160 04/12/07 04/08/07 (G) Organosilane derivative
P-91-0085 04/18/07 01/04/01 (S) 3-(1-methylethyl)-bicyclo(2.2.1)hept-5-ene-2-carboxylic acid, ethyl ester; mixture of (2-exo,3-endo) and (2-endo, 3-exo)
P-91-1084 04/04/07 03/27/07 (S) Fatty acids, C 18-unsaturated, dimers, mixed esters with octanoic acid, decanoic acid and trimethylolpropane

List of Subjects Back to Top

Dated: May 10, 2007.

Todd S. Holderman,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. E7-9596 Filed 5-17-07; 8:45 am]

BILLING CODE 6560-50-S

Site Feedback