Skip to Content
Notice

MET Laboratories, Inc.; Application for Expansion of Recognition

Action

Notice.

Summary

This notice announces the application of MET Laboratories, Inc., (MET) for expansion of its recognition, and presents the Agency's preliminary finding to grant this request. This preliminary finding does not constitute an interim or temporary approval of this application.

 

Table of Contents Back to Top

DATES: Back to Top

Submit information or comments, or any request for extension of the time to comment, on or before August 12, 2010. All submissions must bear a postmark or provide other evidence of the submission date.

ADDRESSES: Back to Top

Submit comments by any of the following methods:

Electronically: Submit comments electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for making electronic submissions.

Fax: If submissions, including attachments, are no longer than 10 pages, commenters may fax them to the OSHA Docket Office at (202) 693-1648.

Mail, hand delivery, express mail, or messenger or courier service: Submit one copy of the comments to the OSHA Docket Office, Docket No. OSHA-2006-0028, U.S. Department of Labor, Room N-2625, 200 Constitution Avenue, NW., Washington, DC 20210. Deliveries (hand, express mail, and messenger and courier service) are accepted during the Department of Labor's and Docket Office's normal business hours, 8:15 a.m.-4:45 p.m., e.t.

Instructions: All submissions must include the Agency name and the OSHA docket number (i.e., OSHA-2006-0028). OSHA will place all submissions, including any personal information provided, in the public docket without revision, and these submissions will be made available online at http://www.regulations.gov.

Docket: To read or download submissions or other material in the docket, go to http://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office.

Extension of comment period: Submit requests for an extension of the comment period on or before August 12, 2010 to the Office of Technical Programs and Coordination Activities, NRTL Program, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue, NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-1644.

FOR FURTHER INFORMATION CONTACT: Back to Top

MaryAnn Garrahan, Director, Office of Technical Programs and Coordination Activities, NRTL Program, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue, NW., Room N-3655, Washington, DC 20210; telephone: (202) 693-2110. For information about the NRTL Program, go to http://www.osha.gov, and select “N” in the site index.

SUPPLEMENTARY INFORMATION: Back to Top

Notice of Expansion Application Back to Top

The Occupational Safety and Health Administration (OSHA) is providing notice that MET Laboratories, Inc., (MET) applied for expansion of its current recognition as a Nationally Recognized Testing Laboratory (NRTL). MET's expansion request covers the use of additional test standards.

OSHA recognition of an NRTL signifies that the organization meets the legal requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition, and is not a delegation or grant of government authority. As a result of recognition, employers may use products approved by the NRTL to meet OSHA standards that require testing and certification.

The Agency processes applications by an NRTL for initial recognition, or for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding, and, in the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL that details its scope of recognition. These pages can be accessed from the Web site at http://www.osha.gov/dts/otpca/nrtl/index.html. Each NRTL's scope of recognition has three elements: (1) The type of products the NRTL may test, with each type specified by its applicable test standard; (2) the recognized site(s) that have the technical capability to perform the testing and certification activities for the applicable test standards within the NRTL's scope of recognition; and (3) the supplemental program(s) that the NRTL may use, each of which allows the NRTL to rely on other parties to perform activities necessary for testing and certification.

General Background on the Application Back to Top

MET submitted two applications, dated October 6 and November 3, 2008, to expand its recognition to include 18 additional test standards. The NRTL Program staff determined that these standards are “appropriate test standards” within the meaning of 29 CFR 1910.7(c). In connection with this request, NRTL Program staff did not perform an on-site review of MET's recognized sites. However, the staff analyzed other information pertinent to the request and determined that MET has the capabilities to perform the testing to 12 of the standards, which are listed below. As a result, the Agency would approve these 12 test standards for the expansion.

MET seeks expansion of its recognition for testing and certification of products to the following test standards: [1]

UL 244ASolid State Controls for Appliances

UL 412Refrigeration Unit Coolers

UL 458*Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts

UL 466Electric Scales

UL 561Floor-Finishing Machines

UL 1230Amateur Movie Lights

UL 1278Movable and Wall or Ceiling Hung Electric Room Heaters

UL 1594Sewing and Cutting Machines

UL 1795Hydromassage Bathtubs

UL 1951Electric Plumbing Accessories

UL 1996Electric Duct Heaters

UL 2021Fixed and Location Dedicated Electric Room Heaters

* This standard is approved for testing and certification of products for use within recreational vehicles and mobile homes.

OSHA's recognition of MET, or any NRTL, for a particular test standard is limited to equipment or materials (i.e., products) for which OSHA standards require third-party testing and certification before use in the workplace. Consequently, if a test standard also covers any product(s) for which OSHA does not require such testing and certification, an NRTL's scope of recognition does not include that product(s).

The test standards listed above may be approved as American National Standards by the American National Standards Institute (ANSI). However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the program's policy, any NRTL recognized for a particular test standard may use either the latest proprietary version of the test standard or the latest ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI approved.

Preliminary Finding on the Application Back to Top

MET submitted an acceptable request for expansion of its recognition as an NRTL. OSHA's review of the application file and other pertinent documents indicates that MET can meet the requirements, as prescribed by 29 CFR 1910.7, for an expansion of its recognition to include the additional test standards listed above. This preliminary finding does not constitute interim or temporary approval of the application.

OSHA welcomes public comments, in sufficient detail, as to whether MET meets the requirements of 29 CFR 1910.7 for expansion of its recognition as a Nationally Recognized Testing Laboratory. Comments should consist of pertinent written documents and exhibits. Commenters needing more time to comment must submit a request in writing, stating the reasons for the request. OSHA must receive the written request for an extension by the due date for comments. OSHA will limit any extension to 30 days unless the requester justifies a longer period. OSHA may deny a request for an extension if it is not adequately justified. You may obtain or review copies of MET's request and other pertinent documents, and all submitted comments, online at http://www.regulations.gov under Docket No. OSHA-2006-0028; or you may contact the Docket Office, Room N-2625, Occupational Safety and Health Administration, U.S. Department of Labor, at the above address. Docket No. OSHA-2006-0028 contains all materials in the record concerning MET's application.

The NRTL Program staff will review all timely comments and, after addressing the issues raised by these comments, will recommend whether to grant MET's expansion request. The Assistant Secretary will make the final decision on granting the request, and, in making this decision, may undertake other proceedings that are prescribed in Appendix A to 29 CFR 1910.7. OSHA will publish a public notice of this final decision in the Federal Register.

Authority and Signature Back to Top

David Michaels, Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue, NW., Washington, DC 20210, directed the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to Sections 6(b) and 8(g) of the Occupational Safety and Health Act of 1970 (29 U.S.C. 655 and 657), Secretary of Labor's Order No. 5-2007 (72 FR 31160), and 29 CFR part 1911.

Signed at Washington, DC, on July 22, 2010.

David Michaels,

Assistant Secretary of Labor for Occupational Safety and Health.

[FR Doc. 2010-18438 Filed 7-27-10; 8:45 am]

BILLING CODE 4510-26-P

Footnotes Back to Top

1. The designations and titles of these test standards were current at the time of the preparation of this notice.

Back to Context
Site Feedback