Skip to Content
Notice

Certain New Chemicals; Receipt and Status Information

Action

Notice.

Summary

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Chemical Substances Inventory (TSCA Inventory)) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document, which covers the period from February 1, 2011 to April 22, 2011, and provides the required notice and status report, consists of the PMNs and TMEs, both pending or expired, and the NOC to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

 

Table of Contents Back to Top

Tables Back to Top

DATES: Back to Top

Comments identified by the specific PMN number or TME number, must be received on or before July 21, 2011.

ADDRESSES: Back to Top

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2011-0496, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:

  • Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
  • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
  • Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov Web site is an “anonymous access” system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: Back to Top

For technical information contact: Bernice Mudd, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 564-8955; e-mail address: mudd.bernice@epa.gov.

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION: Back to Top

I. General Information Back to Top

A. Does this action apply to me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.

vi. Provide specific examples to illustrate your concerns and suggest alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA taking this action? Back to Top

EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/opt/newchems.

Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. This status report, which covers the period from February 1, 2011 to April 22, 2011, consists of the PMNs and TMEs, both pending or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Reports Back to Top

In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA's review of the PMN, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity.

Table I—149 PMNs Received From February 1, 2011 to April 22, 2011 Back to Top
Case No. Received date Projected notice end date Manufacturer/importer Use Chemical
P-11-0190 02/02/11 05/02/11 CBI (G) Paper additive (G) Dialdehyde, reaction products with hydrolyzed n-vinylamide homopolymer hydrohalides.
P-11-0191 02/01/11 05/01/11 CBI (S) Ultra violet curable polymer for kitchen cabinets and office furniture finishes (G) Ultra violet curable polyester polyurethane acrylate.
P-11-0192 02/02/11 05/02/11 CBI (G) Additive for paper (G) Amphoteric polyacrylamide.
P-11-0193 02/02/11 05/02/11 CBI (G) Deposit control additive for fuels (G) Poly alkyl amido hydrazide.
P-11-0194 02/02/11 05/02/11 CBI (G) Plasticizer (S) 1,2,3-propanetricarboxylic acid, 2-(acetyloxy)-, 1,2,3-tris(2-ethylhexyl) ester.
P-11-0195 02/03/11 05/03/11 3M (S) Prepolymer for sprayable adhesive/sealant; prepolymer for high viscosity adhesive/sealant (G) Alkoxysilyl polyether prepolymer.
P-11-0196 02/08/11 05/08/11 Croda Inc. (G) Hard surface cleaner (G) Quaternized ethylene oxide propylene oxide polymer.
P-11-0197 02/08/11 05/08/11 CBI (G) Colourant dispersant (G) Acrylic polymer.
P-11-0198 02/08/11 05/08/11 CBI (G) Colourant dispersant (G) Acrylic polymer.
P-11-0199 02/08/11 05/08/11 CBI (G) Colourant dispersant (G) Acrylic polymer.
P-11-0200 02/07/11 05/07/11 CBI (G) Resin solution additive (G) Aluminum alkoxide complex, alkoxylated aluminum chelate.
P-11-0201 02/09/11 05/09/11 Lubrigreen (G) Bio-based lubricant base oil (S) Fatty acids, C 8-18 and C 18-unsaturated, reaction products with isomerized oleic acid homopolymer.
P-11-0202 02/09/11 05/09/11 Lubrigreen (G) Bio-based lubricant base oil (S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer.
P-11-0203 02/09/11 05/09/11 CBI (G) Paper treatment (G) Perfluoroalkylethyl methacrylate copolymer, salt.
P-11-0204 02/11/11 05/11/11 CBI (S) Brightener for nickel electroplating (G) Acetaldehyde, substituted-, reaction products with 2-butyne-1,4-diol.
P-11-0205 02/15/11 05/15/11 CBI (G) Non-dispersive ink additive (G) Polyalkene, maleated potassium salts.
P-11-0206 02/15/11 05/15/11 Eastman Kodak Company (G) Intermediate (G) Bisaryl iodonium salt.
P-11-0207 02/15/11 05/15/11 Eastman Kodak Company (G) Contained use in an article (G) Substituted aromatic borate salt.
P-11-0208 02/16/11 05/16/11 Lubrigreen (G) Lubricant base oil (S) Fatty acids, C 8-18 and C 18-unsaturated, reaction products with isomerized oleic acid homopolymer 2-ethylhexyl ester.
P-11-0209 02/16/11 05/16/11 Lubrigreen (G) Lubricant base oil (S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer 2-ethylhexyl ester.
P-11-0210 02/16/11 05/16/11 Lubrigreen (G) Lubricant base oil (S) Fatty acids, C 8-18 and C 18-unsaturated, reaction products with isomerized oleic acid dimer 2-ethylhexyl ester.
P-11-0211 02/16/11 05/16/11 Lubrigreen (G) Lubricant base oil (S) Fatty acids, coco, reaction products with isomerized oleic acid dimer 2-ethylhexyl ester.
P-11-0212 02/16/11 05/16/11 Lubrigreen (G) Lubricant base oil (S) 9-octadecenoic acid (9z)-, homopolymer, isomerized.
P-11-0213 02/16/11 05/16/11 Lubrigreen (G) Lubricant base oil (S) Fatty acids, C 8-18 and C 18-unsaturated, reaction products with isomerized oleic acid homopolymer.
P-11-0214 02/16/11 05/16/11 Lubrigreen (G) Lubricant base oil (S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer.
P-11-0215 02/16/11 05/16/11 CBI (G) Base polymer for adhesive (S) 2-propenoic acid, 2-methyl-, dodecyl ester, telomer with methyl 2-methyl-2-propenoate, tridecyl 2-methyl-2-propenoate, 3-(trimethoxysilyl)-1-propanethiol and 3-(trimethoxysilyl) propyl 2-methyl-2-propenoate.
P-11-0216 02/16/11 05/16/11 CBI (G) Base polymer for adhesive (S) 2-propenoic acid, 2-methyl-, dodecyl ester, telomer with butyl 2-propenoate, methyl 2-methyl-2-propenoate, tridecyl 2-methyl-2-propenoate, 3-(trimethoxysilyl)-1-propanethiol and 3-(trimethoxysilyl) propyl 2-methyl-2-propenoate.
P-11-0217 02/17/11 05/17/11 CBI (G) Additive, open, non-dispersive (G) Polyetherfluoro urethane.
P-11-0218 02/17/11 05/17/11 CBI (G) Radiation curing agent (G) Benzenedioic acid, polymer with alkanediol and carboxyaminoalkyl carbamic acid alkoxyalkylester.
P-11-0219 02/18/11 05/18/11 CBI (G) Paint (G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0220 02/18/11 05/18/11 CBI (G) Paint (G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0221 02/18/11 05/18/11 CBI (G) Paint (G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0222 02/18/11 05/18/11 CBI (G) Paint (G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0223 02/18/11 05/18/11 CBI (G) Use as photoinitiator (G) Substituted tris-phenyl thiophenyl-sulfonium halogenide.
P-11-0224 02/22/11 05/22/11 CBI (S) Electrolyte for battery (G) Fluoro ether.
P-11-0225 02/23/11 05/23/11 CBI (G) Adhesive component (S) Amines, C 36-alkylenedi-, polymers with 6-aminohexanoic acid, 1,6-diisocyanato-2,2,4-trimethylhexane, 1,6-diisocyanato-2,4,4-trimethylhexane, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis[1,3-isobenzofurandione] and pyromellitic dianhydride, 2,5-dihydro-2,5-dioxo-1h-pyrrole-1-hexanoic acid-blocked.
P-11-0226 02/23/11 05/23/11 CBI (G) As a component of adhesives and Cosmetics (G) N-(2-hydroxyethyl) alkenamide.
P-11-0227 02/23/11 05/23/11 CBI (G) Coatings (G) Urethane acrylate.
P-11-0228 02/22/11 05/22/11 CBI (S) Used internally as raw material for polyamide manufacture (G) Benzaldehyde, reaction products with polyalkylenepolyamines, hydrogenated.
P-11-0229 02/24/11 05/24/11 H.B. Fuller (G) Industrial adhesive (G) Polyester, polymer with 1,4-butanediol, dodecanedioic, 1,6-heaxanediol, .alpha.-hydro-.omega.-hydroxypoly (oxy-1,4-butanediyl) and isocyanate.
P-11-0230 02/24/11 05/24/11 Goulston technologies, Inc. (G) Antistatic agent for acrylic yam (G) Alkyl amine salt.
P-11-0231 02/25/11 05/25/11 Cardolite Corporation (S) Amine based epoxy curing agent for 2 part epoxy surface coating (G) Cashew nutshell liquid amine polymer.
P-11-0232 02/28/11 05/28/11 CBI (G) Sealant and adhesive (G) Acryloxy functional siloxane.
P-11-0233 02/25/11 05/25/11 CBI (S) Curing agent for epoxy resin (G) Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 2-(chloromethyl)oxirane, reaction products with n3-(3-(dimethylamino)propyl]-n1,n1-dimethyl-alkanepolyamine, compounds with formaldehyde-phenol polymer.
P-11-0234 03/01/11 05/29/11 CBI (G) Chemical intermediate (G) Oligmeric phenolic ether.
P-11-0235 03/01/11 05/29/11 CBI (G) Ink, coating, adhesive (G) Polyacrylate oligomer product from saturated dimer acid, propoxylated glycerol and acrylic acid.
P-11-0236 03/01/11 05/29/11 CBI (G) Ink, coating, adhesive (G) Polyacrylate oligomer product from saturated dimer acid, propoxylated glycerol and acrylic acid.
P-11-0237 03/02/11 05/30/11 Colonial Chemical, Inc. (S) Oil dispersant (S) D-glucopyranose, oligomeric, decyl octyl glycosides, polymer with 1,3-dichloro-2-propanol and sorbitan mono-(9z)-9-octadecenoate.
P-11-0238 03/01/11 05/29/11 IGM Resins Inc. (G) Ultra violet initiator (S) Poly(oxy-1,2-ethanediyl), .alpha.-[2-(4-benzoylphenoxy)acetyl]-.omega.-[[2-(4-benzoylphenoxy)acetyl]oxy]-.
P-11-0239 03/02/11 05/30/11 CBI (G) Emulsifier (G) Butanedioic acid, monopolyisobutylene derivates, (alkylimino)di-2,1-ethanediyl esters, compounds with akylamino alcohol(1:2).
P-11-0240 03/02/11 05/30/11 CBI (G) Component of an industrial adhesive (G) Modified epoxy resin.
P-11-0241 03/04/11 06/01/11 CBI (G) Used to adjust (retard) set times in calcium sulfate based binders such as gypsum boards, plaster boards or wall boards (S) L-lysine, n2, n6-bis (3-carboxy-1-oxopropyl)-, sodium salt (1:3).
P-11-0242 03/04/11 06/01/11 Materia Inc. (G) Resin formulation additive (G) Hydroxy-olefin.
P-11-0243 03/07/11 06/04/11 CBI (G) Thermoplastic urethane (G) Aliphatic thermoplastic urethane.
P-11-0244 03/07/11 06/04/11 CBI (G) Thermoplastic urethane (G) Aliphatic thermoplastic urethane.
P-11-0245 03/07/11 06/04/11 CBI (G) Concrete additive (G) Alkoxylate polymer, mono(alkenyl) ether.
P-11-0246 03/08/11 06/05/11 Oleon Americas Inc. (S) Emulsifier for commercial (I&I) and household floor cleaners (S) D-xylopyranose, oligomeric, C 16-18-alkyl glycosides.
P-11-0247 03/04/11 06/01/11 CBI (G) Treatment for textiles (G) Perfluoroalkylethyl methacrylate copolymer.
P-11-0248 03/08/11 06/05/11 CBI (G) Printing additive (G) Roin, polymer with ethylene glycol, propanediol, alkanedicarboxylic acid, terephthalic acid and trimellitic anhydride.
P-11-0249 03/08/11 06/05/11 CBI (G) Resin for use in coatings (G) Acrylic latex.
P-11-0250 03/09/11 06/06/11 Henkel Corporation (S) Cure initiator in adhesive formulations (S) Benzamide, n-(aminothioxomethyl)-.
P-11-0251 03/10/11 06/07/11 CBI (G) Printing inks (G) Cycloaliphatic anhydride polymer with alkyldiol.
P-11-0252 03/10/11 06/07/11 CBI (G) Photografic chemical (G) Benzeneacetonitrile, alkoxy-[[(alkylsulfonyl)oxy]imino]-.
P-11-0253 03/10/11 06/07/11 Dow Chemical Company (G) Detergents and cleaner additive (G) Acrylic copolymer.
P-11-0254 03/09/11 06/06/11 H.B. Fuller (G) Industrial adhesive (G) Alkanedioic acid, polymer with ethenyl acetate, alkyl 2-propenoate, and 2-propenoic acid.
P-11-0255 03/10/11 06/07/11 Colonial Chemical, Inc. (S) Hard surface cleaner in high caustic solutions (S) D-glucopyranose, oligomeric, decyl octyl glycosides, 2,3-dihydroxypropyl ethers, phosphates, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0256 03/10/11 06/07/11 Colonial Chemical, Inc. (S) Hard surface cleaner in high caustic solutions (S) D-glucopyranose, oligomeric, c10-16-alkyl glycosides, 2,3-dihydroxypropyl ethers, phosphates, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0257 03/10/11 06/07/11 Nanotech Industries, Inc. (S) Flooring; paints; top coating (S) Carbamic acid, N,N'-(trimethyl-1,6-hexanediyl)bis-, ester with 1,2-propanediol (1:2).
P-11-0258 03/10/11 06/07/11 CBI (G) Curing agent for epoxy resin (G) Epoxy and isocyanate modified aliphatic polyamine.
P-11-0259 03/04/11 06/01/11 CBI (G) Flexible packaging adhesive (G) Polyether polyester polyurethane adhesive.
P-11-0260 03/11/11 06/08/11 CBI (G) Urethane adhesive (G) Isocyanate-terminated prepolymer.
P-11-0261 03/16/11 06/13/11 Global Tungsten and Powders Corp. (S) Luminescent phosphor for use in fluorescent lamp manufacturing (S) Aluminum barium europium magnesium oxide.
P-11-0262 03/16/11 06/13/11 Global Tungsten and Powders Corp. (S) Luminescent phosphor for use in fluorescent lamp manufacture (S) Europium strontium borate metaphosphate oxide.
P-11-0263 03/15/11 06/12/11 CBI (G) Curing agent for epoxy resin (G) Modified aliphatic polyamine.
P-11-0264 03/17/11 06/14/11 CBI (G) Flame retardant (G) Brominated aromatic oligomer.
P-11-0265 03/17/11 06/14/11 CBI (G) Antistatic additive in polymers, antistatic additive in liquid resins (G) Dialkyl imidazolium salt.
P-11-0266 03/17/11 06/14/11 CBI (G) Industrial lubricant (G) Polypentaerythritol, mixed esters with straight and branched monoacids.
P-11-0267 03/18/11 06/15/11 Hybrid Plastics, Inc. (G) Thermoplastics and coatings additive; elastomer additive (S) Tricyclo[7.3.3.15,11]heptasiloxane-3,7,14-triol-1,3,5,7,9,11,14-heptakis(2,4,4-trimethylpentyl)-.
P-11-0268 03/21/11 06/18/11 CBI (G) Flame retardant (G) Phosphoric acid, diaryl alkyl ester.
P-11-0269 03/21/11 06/18/11 CBI (G) Optical material component (G) Perfluorinated cyclo oxyaliphatic polymer.
P-11-0270 03/21/11 06/18/11 Lockheed Martin (S) Piezoelectric ceramics used for active and passive underwater acoustic systems (S) Lead strontium titanium zirconium oxide.
P-11-0271 03/21/11 06/18/11 Lockheed Martin (S) Piezoelectric ceramics used for active and passive underwater acoustic systems. (S) Calcium cobalt lead titanium tungsten oxide.
P-11-0272 03/21/11 06/18/11 Lockheed Martin (S) Piezoelectric ceramics used for active and passive underwater acoustic systems (S) Calcium cobalt lead strontium titanium tungsten oxide.
P-11-0273 03/21/11 06/18/11 Lockheed Martin (S) Piezoelectric ceramics used for active and passive underwater acoustic systems (S) Lanthanum lead titanium zirconium oxide.
P-11-0274 03/21/11 06/18/11 Lockheed Martin (S) Piezoelectric ceramics used for active and passive underwater acoustic systems (S) Lead niobium titanium zirconium oxide.
P-11-0275 03/23/11 06/20/11 CBI (G) Coating applications (G) Hydroxy alkyl alkyl acrylate, polymer with alkyl acrylate, aromatic vinyl monomer, dialkyl acrylate and alkyl alkyl acrylate.
P-11-0276 03/24/11 06/21/11 Mane, USA (G) Perfumery ingredient (S) 1,5-cyclododecadiene, 10-methoxy-1,5,9-trimethyl-1,5-cyclododecadiene, 9-methoxy-1,5,10-trimethyl- 1,5-cyclododecadiene, 9-methoxy-1,6,10-trimethyl- 1,5-cylcododecadiene, 9-methoxy-2,5,10-trimethyl-.
P-11-0277 03/24/11 06/21/11 Zeon Chemicals L.P. (S) Automotive seals and gaskets (G) Modified acrylonitrile, butadiene polymer, hydrogenated.
P-11-0278 03/24/11 06/21/11 Cytec Industries Inc. (G) Coatings resin (G) Heteromonocycle, polymer with disubstituted carbomonocyle and alkylene glycol, alkyl acrylate blocked.
P-11-0279 03/24/11 06/21/11 CBI (S) Automotive coatings (G) Polyester resin.
P-11-0280 03/25/11 06/22/11 Cytec Industries Inc. (G) Coating resin (G) Epoxy modified alkyd resin, partially neutralized.
P-11-0281 03/25/11 06/22/11 CBI (S) Lubricant additive for the purposes of anti corrosion, viscosity control and dispersant improver (S) Fatty acids, lanolin, esters with cholesterol-low lanolin alcs.
P-11-0282 03/25/11 06/22/11 CBI (S) Lubricant additive for the purposes of anti corrosion, viscosity control and dispersant improver (S) Fatty acids, C 10-30, esters with cholesterol-low lanolin alcs.
P-11-0283 03/25/11 06/22/11 3M Company (G) Surfactant (G) Oleate.
P-11-0284 03/25/11 06/22/11 3M Company (G) Surfactant (G) Oleyl acrylate.
P-11-0285 03/28/11 06/25/11 CBI (G) Coating additive (G) Acid anhydride, polymer with aromatic isocyanate and polyalkyleneglycol, alkanol and diazole alkanamine and lactone homopolymer alkyl ester-blocked.
P-11-0286 03/28/11 06/25/11 CBI (G) Open, non-dispersive (G) Blocked polyester polyurethane, neutralized.
P-11-0287 03/28/11 06/25/11 CBI (G) Open, non-dispersive use (G) Acrylic silane polymer.
P-11-0288 03/25/11 06/22/11 CBI (S) Photoinitiator (G) Biphenyl alkyl morpholino ketone.
P-11-0289 03/28/11 Oleon Americas Inc. (S) Additive (tracer) for natural fats and oils (S) Heptanoic acid, 1,2,3-propanetriyl ester (9ci).
P-11-0290 03/29/11 06/26/11 Scnte LLC (G) The material will be used as the sensor element in an electrochemical sensor. one carbon nanotube-sic device will be use per one sensor. the maximum estimated annual quantity of sensors will be 10,000. this completed sensor will be able to detect metals and nutrients in water (G) Carbon nanotubes.
P-11-0291 03/28/11 06/25/11 CBI (G) For use as an exterior coating for food containers (G) Polyester resin.
P-11-0292 03/29/11 06/26/11 Colonial Chemical, Inc. (S) Hard surface cleaner in high caustic solutions (S) D-glucopyronase, oligomeric, decyl octyl glycosides, 2-hydroxy-3-sulfopropyl ethers, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0293 03/29/11 06/26/11 Colonial Chemical, Inc. (S) Hard surface cleaner in high caustic solutions (S) D-glucopyronase, oligomeric, C 10-16-alkyl glycosides, 2-hydroxy-3-sulfopropyl ethers, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0294 03/30/11 06/27/11 CBI (G) Open, non-dispersive use (polycarbonate) (G) Polycarbonate.
P-11-0295 03/30/11 06/27/11 CBI (G) The PMN substance will be used as a component in detergents, a corrosion inhibitor in multiple applications, and a concrete additive (G) Reaction product from the oxidation of D-glucose, neutralized with naoh.
P-11-0296 03/30/11 06/27/11 CBI (G) The PMN substance will be used as a component in detergents, a corrosion inhibitor in multiple applications, and a concrete additive (G) Reaction products from the oxidation of d-glucose, neutralized with sodium hydroxide and potassium hydroxide.
P-11-0297 04/04/11 07/02/11 CBI (G) Open, non-dispersive use (G) Azo dyestuff.
P-11-0298 04/04/11 07/02/11 Dow Chemical Company (S) Hardener for epoxy thermosetting coatings (G) Ethoxylated epoxy amine polymer.
P-11-0299 04/04/11 07/02/11 Dow Chemical Company (S) Hardener for epoxy thermosetting coatings (G) Polypropylene glycol, epoxy amine polymer.
P-11-0300 04/04/11 07/02/11 CBI (S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant (G) Aromatic polyester polyol.
P-11-0301 04/04/11 07/02/11 CBI (S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant (G) Aromatic polyester polyol
P-11-0302 04/04/11 07/02/11 CBI (S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant (G) Aromatic polyester polyol.
P-11-0303 04/04/11 07/02/11 CBI (S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant (G) Aromatic polyester polyol.
P-11-0304 04/04/11 07/02/11 CBI (S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant (G) Aromatic polyester polyol.
P-11-0305 04/04/11 07/02/11 King Industries, Inc. (G) Resin modifier for thermoplastic polyurethane elastomers (G) Polyester diol.
P-11-0306 04/04/11 07/02/11 CBI (S) Acrylic resin used in ultra violet curable inks and coatings (G) Tertiary amine acrylate.
P-11-0307 04/04/11 07/02/11 Cardolite Corporation (S) Epoxy curing agent (G) Cashew nutshell liquid amine polymer.
P-11-0308 04/05/11 07/03/11 Dow Chemical Company (G) Dispersant (G) Acrylic polymer.
P-11-0309 04/06/11 07/04/11 H.B. Fuller Company (G) Industrial adhesive (G) Hexanedioic acid, polymer with polyether polyol, 1,1'-methylenebis[4-isocyanatobenzene] and dihydroxydialkyl ether.
P-11-0310 04/06/11 07/04/11 H.B. Fuller Company (G) Industrial adhesive (G) Hexanedioic acid, polymer with polyether polyol, 1,1'-methylenebis[isocyanatobenzene] and dihydroxydialkyl ether.
P-11-0311 04/06/11 07/04/11 H.B. Fuller Company (G) Industrial adhesive (G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[4-isocyanatobenzene], dihydroxydialkyl ether and dialkanol ether.
P-11-0312 04/06/11 07/04/11 H.B. Fuller Company (G) Industrial adhesive (G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[isocyanatobenzene], dihydroxydialkyl ether and dialkanol ether.
P-11-0313 04/06/11 07/04/11 H.B. Fuller Company (G) Industrial adhesive (G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[4-isocyanatobenzene], and dihydroxydialkyl ether, reaction products with dialkylcarbinol.
P-11-0314 04/06/11 07/04/11 H.B. Fuller Company (G) Industrial adhesive (G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[isocyanatobenzene] , and dihydroxydialkyl ether, reaction products with dialkylcarbinol.
P-11-0315 04/07/11 07/05/11 K+A North America (S) Fertilizer additive (S) 1H-pyrazole, 3,4-dimethyl-, phosphate(1:1).
P-11-0316 04/07/11 07/05/11 Ascend Performance Materials, LLC (G) Industrial solvent, in (closed and open systems. accelerant in permitted industrial explosives (S) Cyclohexane, oxidized, by-products from, distillation residues.
P-11-0317 04/08/11 07/06/11 Lubrizol Corporation (G) Lubricant additive (G) Formaldehyde, reaction products with ethylene-maleic anhydride-propene polymer, aryl amine and succinic anhydride monopolyisobutylene derivates.
P-11-0318 04/11/11 07/09/11 CBI (G) Additive (G) Perfluoro multiphenylbenzene.
P-11-0319 04/11/11 07/09/11 CBI (G) Additive, open, non-dispersive (G) Polyester polyether urethane block copolymer.
P-11-0320 04/11/11 07/09/11 CBI (G) Additive, open, non-dispersive (G) Polyester polyether urethane block copolymer.
P-11-0321 04/11/11 07/09/11 CBI (G) Additive, open, non-dispersive (G) Polyester polyether urethane block copolymer.
P-11-0322 04/11/11 07/09/11 CBI (G) Additive, open, non-dispersive (G) Siloxanes and silicones, methyl alkyl, polyether modified.
P-11-0323 04/11/11 07/09/11 CBI (G) Additive, open, non-dispersive (G) Siloxanes and silicones, methyl alkyl, polyether modified.
P-11-0324 04/11/11 07/09/11 CBI (G) Additive, open, non-dispersive (G) Siloxanes and silicones, methyl alkyl, polyester modified.
P-11-0325 04/13/11 07/11/11 CBI (G) Battery component manufacturing (G) Beta alumina powder.
P-11-0326 04/13/11 07/11/11 CBI (G) Cleaning additive for cpu manufacturing (G) Glycerylether.
P-11-0327 04/14/11 Kior (G) Distillation feedstock after hydrotreatment (S) Distillates (lignocellulosic), C 5-40.
P-11-0328 04/14/11 Kior (G) Feedstock (S) Parraffin waxes (lignocellulosic), hydrotreated, C 5-40-branched, cyclic and linear.
P-11-0329 04/14/11 Kior (S) Hydrotreated lignocellulosic naphtha will be used as blendstock for conventional fossil fuels (S) Naphtha (lignocellulosic), hydrotreated, C 5-12-branched, cyclic and linear.
P-11-0330 04/14/11 Kior (S) Hydrotreated lignocellulosic kerosene will be used as blendstock for conventional fossil fuels (S) Kerosine (lignocellulosic), hydrotreated, C 8-16-branched,cyclic and linear.
P-11-0331 04/14/11 Kior (S) Hydrotreated lignocellulosic distillate will be used as blendstock for conventional fossil fuels (S) Distillates (lignocellulosic), hydrotreated, C 8-26-branched, cyclic, and linear.
P-11-0332 04/14/11 Kior (S) Intended for use in a manner comparable to gas oil as it is currently used in industry (S) Residual oils (lignocellulosic), hydrotreated, C 20-40-branched, cyclic and linear.
P-11-0333 04/14/11 CBI (G) Component of industrial coating (G) Phosphated polyester.
P-11-0334 04/15/11 CBI (G) An open non-dispersive use in ink (G) Aliphatic and alicyclic alcohol type polyester.
P-11-0335 04/15/11 CBI (G) Cross-linker (G) Methyl, phenyl, amino-functional siloxanes and silsesquioxane.
P-11-0337 04/19/11 CBI (S) Ingredient in fragance compound (S) 4,7-decadienal.
P-11-0338 04/21/11 CBI (S) Photoinitiator (G) Biphenyl alkyl morpholino ketone.
P-11-0339 04/22/11 07/20/11 Southwest Nanotechnologies Inc. (S) Additives for resins, thermoplastics, and elastomers for mechanical reinforcement and enhanced electrical properties; coatings on metallic foils for battery applications; manufacture of fabric composites using mwnt (S) Multi-wall carbon nanotube also know as—mwnt (multi-wall carbon nanotube), smwcnt (specialty multi-wall carbon nanotube), and smwxxx and where xxx represents our identifier for a new generation of the same products.
P-11-0340 04/22/11 07/20/11 CBI (G) Reactant (G) Formaldehyde polymer with reaction products of alkylated phenol and polyalkyltriamine.

In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received by EPA during this period: The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity.

Table II—2 TMEs Received From February 1, 2011 to April 22, 2011 Back to Top
Case No. Received date Projected review end date Manufacturer/importer Use Chemical
T-11-0007 03/24/11 05/07/11 Cytec Industries Inc (G) Coating resin (G) Heteromonocycle, polymer with substituted carbomonocycle and alkylene glycol, alkyl acrylate blocked.
T-11-0008 03/25/11 05/08/11 Cytec Industries Inc (G) Coating resin (G) Epoxy modified alkyd resin, partially neutralized.

In Table III. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA's review of the NOC, and chemical identity.

Table III—122 NOCs Received From February 1, 2011 to April 22, 2011 Back to Top
Case No. Received date Commencement notice end date Chemical
P-00-0141 02/03/11 01/23/11 (S) L-aspartic acid, N,N′-1,2-ethanediylbis-, magnesium salt.
P-00-0142 02/03/11 01/23/11 (S) L-aspartic acid, N,N′-1,2-ethanediylbis-, magnesium sodium salt.
P-00-0145 02/03/11 01/23/11 (S) L-aspartic acid, N,N′-1,2-ethanediylbis-, magnesium sodium salt (1:1:1).
P-01-0932 03/08/11 03/04/11 (G) Aliphatic epoxide.
P-02-0249 04/04/11 03/23/11 (S) Fatty acids, C 16-18 and C 18-unsatd., me esters, epoxidized.
P-04-0479 04/19/11 04/04/11 (G) Mixture containing alcohols, aminoalcohols and their sodium salts.
P-04-0575 04/01/11 02/23/11 (G) Alkoxyated dihalogenated aromatic heterocycle.
P-04-0670 04/01/11 03/15/11 (G) Poly(alkoxy aromatic heterocycle).
P-05-0267 02/14/11 01/31/11 (G) Polydimethyl fluoroalkyl hydrogen siloxane.
P-06-0255 04/06/11 03/14/11 (S) Fatty acids, C 18-unsatd., dimers, hydrogenated, polymers with 1,4-cyclohexanedicarboxylic acid, polyethylene-polypropylene glycol bis(2-aminopropyl) ether, polypropylene glycol diamine and propionic acid.
P-06-0394 03/31/11 03/03/11 (G) Epoxy acrylate oligomer.
P-06-0702 02/01/11 01/28/11 (G) Substituted aliphatic amine.
P-07-0010 04/04/11 03/25/11 (G) Styrene-maleic anhydride copolymer, reaction products with polyether, salt with alkanolamin.
P-07-0090 03/31/11 03/03/11 (G) Aliphatic urethane acrylate oligomer.
P-07-0257 02/15/11 02/07/11 (G) Aqueous, aliphatic polyether polyurethane dispersion polymer.
P-07-0407 02/10/11 01/29/11 (G) Fatty acid polymer with aliphatic diol and aromatic diacid.
P-07-0601 02/17/11 01/27/11 (G) Hydrofluoroolefin.
P-08-0080 03/14/11 11/18/10 (G) Amine salt of polyester polyol, cycloaliphatic glycol, hydroxy substituted carboxylic acid, alkyldiamine and aliphatic diisocyanate.
P-08-0524 03/31/11 03/03/11 (G) Unsaturated polyester.
P-08-0545 03/11/11 03/02/11 (G) Surface-active, blocked isocyanate polymer.
P-08-0558 03/31/11 03/03/11 (G) Polyurethane acrylate.
P-08-0664 02/14/11 02/04/11 (G) Fluorinated acrylic copolymer.
P-09-0029 03/31/11 03/03/11 (G) Polyester acrylate.
P-09-0162 03/08/11 02/24/11 (G) Styrenic polymers.
P-09-0175 03/04/11 02/27/11 (G) Aqueous polyurethane resin dispersion.
P-09-0209 03/01/11 02/14/11 (S) Poly(oxy-1,2-ethanediyl), .alpha.-undecyl-.omega.-hydroxy-, branched and linear, ethers with 1,2-decanediol (1:1).
P-09-0258 03/31/11 03/03/11 (G) Bis-phenoxyethanol fluorene diacrylate.
P-09-0359 03/31/11 03/03/11 (G) Methylene bis-(4-cyclohexylisocyanate), oligomeric reaction products with polyester polyol and hydroxyethyl acrylate and 2,2-bis(hydroxymethyl) propionic acid, compound with amine.
P-09-0360 03/31/11 03/03/11 (G) Methylene bis-(4-cyclohexylisocyanate), oligomeric reaction products with polyester polyol and hydroxyethyl acrylate and 2,2-bis(hydroxymethyl) propionic acid.
P-09-0391 02/01/11 01/10/11 (G) Polyamide epichlorohydrin resin salt (PMN substances A-F).
P-09-0403 03/31/11 03/03/11 (G) Alkyd resin.
P-09-0505 02/18/11 02/16/11 (G) Aliphatic urethane acrylate.
P-09-0533 03/08/11 02/28/11 (S) Siloxanes and silicones, me hydrogen, me 3-(2-oxiranylmethoxy)propyl, ethoxy- and methoxy-terminated.
P-09-0568 03/22/11 03/14/11 (G) Formaldehyde, polymer with 2-(chloromethyl)oxirane, polyoxyalkane, and phenols.
P-10-0079 04/19/11 04/14/11 (G) Substituted naphthalene mixed salt.
P-10-0179 04/19/11 04/13/11 (G) Polymer of tall oil fatty acid, aliphatic diols, aliphatic polyols, and aromatic acids.
P-10-0232 02/22/11 02/09/11 (G) Polycarboxylic acid/polysulfonate derivative.
P-10-0269 03/01/11 02/07/11 (G) Polymer of aromatic dicarboxylic acid and alkane diamine.
P-10-0282 01/31/11 01/12/11 (G) Maleated nylon graft copolymer.
P-10-0326 02/22/11 01/26/11 (S) Propane, 1,1,1,2,3,3-hexafluoro-.
P-10-0327 03/04/11 02/08/11 (S) 1-propene, 1,2,3,3,3-pentafluoro-.
P-10-0338 02/22/11 02/10/11 (G) Acrylate copolymer.
P-10-0339 02/22/11 01/31/11 (G) Acrylate copolymer.
P-10-0342 04/07/11 03/07/11 (G) Poly 2-ethylhexyl methacrylate.
P-10-0343 02/09/11 01/15/11 (G) Substituted cyclomethacrylate.
P-10-0358 02/18/11 02/14/11 (G) Polycyclic polyamine diester organometallic compound.
P-10-0374 02/08/11 02/01/11 (G) Modified polyalkylene polyamine reacted with bisphenol a diglycidyl ether 1 and modified epoxy resin.
P-10-0399 02/24/11 02/21/11 (G) Styrene-maleinate copolymer.
P-10-0406 03/10/11 03/08/11 (G) Alkene acrylate copolymer.
P-10-0423 02/01/11 01/24/11 (S) Benzenesulfonic acid 3,3′-[(9,10-dihydro-5,8-dihydroxy-9,10-dioxo-1,4-anthracenediyl)dimino]bis[6-butyl-], disodium salt.
P-10-0435 04/07/11 03/24/11 (G) Substituted anthraquionone derivative.
P-10-0454 02/22/11 01/26/11 (S) 1,3-divinyl imidazolidin-2-one.
P-10-0455 02/15/11 02/10/11 (G) Hexahalosubstituted alkane.
P-10-0456 03/28/11 03/14/11 (G) Alkenes, polymer with anhydride esters.
P-10-0457 02/15/11 01/26/11 (G) Pentahalosubstituted alkane.
P-10-0460 03/18/11 03/02/11 (G) Fatty acids, reaction product with adipic and trifunctional alcohol.
P-10-0489 02/15/11 02/14/11 (G) Pentahalosubstituted alkene.
P-10-0496 03/21/11 02/27/11 (G) Poly acrylate.
P-10-0501 02/09/11 01/17/11 (G) Substituted pyridone.
P-10-0517 02/17/11 02/15/11 (S) Oxirane, 2-ethyl-, polymer with oxirane, mono-C 12-14-sec-alkyl ethers.
P-10-0536 04/01/11 03/26/11 (G) Styrene-maleic anhydride copolymer, reaction product with amino compounds.
P-10-0546 02/15/11 01/15/11 (G) Modified lithium iron phosphate.
P-10-0547 03/30/11 01/29/11 (G) Vegetable oil, modified products.
P-10-0548 03/30/11 02/15/11 (G) Vegetable oil, modified products.
P-10-0549 03/30/11 02/14/11 (G) Vegetable oil, modified products.
P-10-0557 04/01/11 03/26/11 (G) Aromatic polyester.
P-10-0562 03/23/11 03/16/11 (G) Alkyl methacrylates, polymer with alkyl acrylates, styrene, hydroxyalkyl methacrylates, epoxypropyl acrylates and polyalkene glycol hydrogen sulfate, alkyloxyalkyl alkenyloxy alkyl, ammonium salt.
P-10-0570 04/01/11 03/26/11 (G) Polyester.
P-10-0576 04/19/11 04/09/11 (G) Alkyloxypropyliminodipropionic acid, monosodium salt.
P-10-0577 03/18/11 02/24/11 (G) Polyamideimide.
P-10-0578 03/23/11 03/16/11 (G) Alkylenealkanedioic acid, polymer with alkenylbenzene and alkenenitrile, ammonium salt, alkylhydroperoxide-initiated.
P-10-0580 03/11/11 02/28/11 (G) Hetromonocyclic[3,4-b]thiophene, homopolymer, 2-[1-[difluoro[(1,2,2-trifluoroethenyl)oxy]methyl]-1,2,2,2-tetrafluoroethoxy]-1,1,2,2-tetrafluoroethyoxy]-1,1,2,2-tetrafluoroethanesulfonic acid-tetrafluoroethylene polymer-doped.
P-10-0582 03/08/11 02/03/11 (G) Isocyanate terminated urethane polymer.
P-10-0583 03/08/11 02/24/11 (G) Isocyanate terminated urethane polymer.
P-10-0584 03/08/11 02/02/11 (G) Isocyanate terminated urethane polymer.
P-10-0585 03/08/11 02/17/11 (G) Isocyanate terminated urethane polymer.
P-10-0586 01/31/11 01/05/11 (G) Isocyanate terminated urethane polymer.
P-10-0587 01/31/11 01/06/11 (G) Isocyanate terminated urethane polymer.
P-10-0589 02/22/11 01/31/11 (G) Dibasic acid ester.
P-10-0593 02/04/11 01/10/11 (G) Modified starch.
P-11-0001 02/17/11 02/09/11 (G) Aromatic polyisocyanate, aliphatic polyol blocked.
P-11-0010 02/04/11 01/05/11 (G) Fatty acid modified polyester aliphatic polyurethane dispersion.
P-11-0011 02/09/11 02/04/11 (G) Polyol blocked cycloaliphatic amine polymer.
P-11-0013 02/11/11 02/09/11 (G) Alkyl dioic acid, polymer with substituted alkanoate, alkyl diisocyanate, alkyldiol, and substituted alkanoic acid.
P-11-0017 03/07/11 02/18/11 (G) Aromatic diacid, polymer with polyol, alkyl triol, alkyl alkanoate.
P-11-0019 04/07/11 03/28/11 (G) Mercapto silane ester of silica.
P-11-0023 04/07/11 03/29/11 (S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,2-trifluoroethoxy)methyl]oxetane, ether with 2,2-dimethyl-1,3-propanediol (2:1).
P-11-0024 04/11/11 03/18/11 (S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,3,3,3-pentafluoropropoxy)methyl]oxtane, ether with 2,2-dimethyl-1,3-propanediol (2:1).
P-11-0029 03/28/11 03/25/11 (S) Cyclopentene, 1,3,3,4,4,5,5-heptafluoro-.
P-11-0030 02/23/11 02/11/11 (G) Waterborne polyurethane.
P-11-0041 02/22/11 02/11/11 (S) Oxirane, 2-ethyl-, polymer with 2-methyloxirane, monododecyl ether.
P-11-0051 04/05/11 03/09/11 (G) Amino methacrylate copolymer.
P-11-0054 03/23/11 02/28/11 (S) 2H-pyran-4-ol, 2-(1-ethylpropyl) tetrahydro-4-methyl.
P-11-0056 03/31/11 03/03/11 (G) Aliphatic urethane acrylate polymer.
P-11-0057 03/31/11 03/03/11 (G) Aliphatic urethane acrylate polymer.
P-11-0061 03/04/11 02/23/11 (G) Reaction product of substituted naphthalenesulfonic acid diazotized and couple with substituted triazine and substituted naphthalenesulfonic acid alkyl amino phenyl compound.
P-11-0062 04/19/11 04/07/11 (G) Carbomonocyclic alkene polymer with alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, polyalkylidene alkenoate and dialkylaminoalkyl alkenamide.
P-11-0065 02/24/11 02/16/11 (G) Alkyl methacrylate.
P-11-0068 03/28/11 03/09/11 (G) Polyester polyamide.
P-11-0070 03/10/11 03/09/11 (S) Siloxanes and silicones, me hydrogen, me vinyl.
P-11-0071 03/10/11 02/23/11 (S) Siloxanes and silicones, di-ph, me hydrogen, me vinyl.
P-11-0073 02/15/11 02/10/11 (G) Alkylxylene.
P-11-0083 04/01/11 03/28/11 (G) Reaction product of substituted naphthalenesulfonic acid and substituted benzenesulfonic acid diazotized and coupled with alkyl benzene substituted triazine amino phenyl compound.
P-11-0094 04/05/11 03/13/11 (G) 2-naphthalenecarboxylic acid, substituted diazenyl calcium salt.
P-11-0095 03/23/11 03/21/11 (S) Tricyclo[7.3.3.15,11]heptasiloxane-3,7,14-triol, 1,3,5,7,9,11,14-heptaphenyl.
P-11-0096 03/22/11 03/15/11 (S) 1,4-benzenedicarboxylic acid, 1,4-dimethyl ester, polymer with 1,4-cyclohexanedimethanol and 2,2,4,4-tetramethyl-1,3-cyclobutanediol, manufacture of, by-products from, reaction products with ethylene glycol, polymers with 1,4-cyclohexanedimethanol, diethylene glycol, ethylene glycol, maleic anhydride and phthalic anhydride, 3a,4,5,6,7,7a-hexahydro-4,7-methano-1h-inden-5(or 6)-yl esters.
P-11-0099 04/01/11 03/24/11 (G) Condensation sodium/potassium salt reaction product of substituted naphthalene sulfonic acid azo substituted phenyl amino substituted triazine and alkylsulfonyl benzenesulfonic acid azo substituted phenylamino substituted triazine.
P-11-0110 04/19/11 03/25/11 (G) Tertiary ammonium compound.
P-11-0112 04/20/11 04/13/11 (G) Modified epoxy resin.
P-11-0113 04/12/11 03/28/11 (G) Heteromonocyclo, 4-methyl-, oxide, methanesulfonate salt.
P-11-0115 03/28/11 03/17/11 (G) Mdi modified polyester resin.
P-11-0126 04/16/11 04/13/11 (S) 1,3-benzenedicarboxylic acid, polymers with by-products from manuf. of 1,4-cyclohexanedimethanol-di-me terephthalate-2,2,4,4-tetramethyl-1,3-cyclobutanediol polymer-ethylene glycol reaction products, 1,4-cyclohexanedimethanol, diethylene glycol, ethylene glycol, maleic anhyride and triethylene glycol.
P-11-0127 04/12/11 03/16/11 (G) Epoxidized fatty acids, unsaturated, me esters, polymers with trimethylolpropane.
P-11-0134 04/19/11 04/08/11 (G) Carbomonocyclic alkene polymer with alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, polyalkylidiene alkenoate and heteromonocyclic alkene.
P-11-0143 04/08/11 04/04/11 (G) Acrylic polymer.
P-11-0155 03/21/11 03/18/11 (G) Polymer substituted anthraquinone derivative.
P-98-0317 04/08/11 03/01/11 (G) Substituted cyclic olefin.
P-11-0127 04/12/11 03/16/11 (G) Epoxidized fatty acids, unsaturated, me esters, polymers with trimethylolpropane.
P-11-0134 04/19/11 04/08/11 (G) Carbomonocyclic alkene polymer with alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, polyalkylidiene alkenoate and heteromonocyclic alkene.
P-11-0143 04/08/11 04/04/11 (G) Acrylic polymer.
P-11-0155 03/21/11 03/18/11 (G) Polymer substituted anthraquinone derivative.
P-98-0317 04/08/11 03/01/11 (G) Substituted cyclic olefin.

If you are interested in information that is not included in these tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

List of Subjects Back to Top

Dated: June 8, 2011.

Chandler Sirmons,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

[FR Doc. 2011-15246 Filed 6-17-11; 11:15 am]

BILLING CODE 6560-50-P

Site Feedback