Skip to Content

Notice

Cold-Rolled Carbon Steel Flat Products from Germany; Final Results of Expedited Sunset Review of Antidumping Duty Order

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

ACTION:

Notice of final results of expedited sunset review: cold-rolled carbon steel flat products from Germany.

SUMMARY:

On September 1, 1999, the Department of Commerce (“the Department”) published the notice of initiation of sunset review of the antidumping duty order on cold-rolled carbon steel flat products from Germany (64 FR 47767), pursuant to section 751(c) of the Tariff Act of 1930, as amended (“the Act”). On the basis of a notice of intent to participate and adequate substantive response filed on behalf of domestic interested parties and a waiver of participation from respondent interested parties, we determined to conduct an expedited sunset review. Based on our analysis of the comments received, we find that revocation of the antidumping duty order would be likely to lead to continuation or recurrence of dumping at the levels listed below in the section entitled Final Results of the Review.

EFFECTIVE DATE:

April 6, 2000.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Eun W. Cho or Melissa G. Skinner, Office of Policy for Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-1698 or (202) 482-1560, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

The Applicable Statute

Unless otherwise indicated, all citations to the Act are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Act by the Uruguay Round Agreements Act (“URAA”). In addition, unless otherwise indicated, all citations to the Department's regulations are to 19 CFR part 351 (1999). Guidance on methodological or analytical issues relevant to the Department's conduct of sunset reviews is set forth in the Department's Policy Bulletin 98:3—Policies Regarding the Conduct of Five-year (“Sunset”) Reviews of Start Printed Page 18047Antidumping and Countervailing Duty Orders; Policy Bulletin, 63 FR 18871 (April 16, 1998) (Sunset Policy Bulletin).

Background

On September 1, 1999, the Department published the notice of initiation of sunset review of the antidumping duty order on cold-rolled carbon steel flat products from Germany (64 FR 47767). We invited parties to comment. On the basis of a notice of intent to participate and adequate substantive responses filed on behalf of domestic interested parties and a waiver of participation from respondent interested parties, we determined to conduct an expedited sunset review. The Department is conducting this sunset review in accordance with sections 751 and 752 of the Act.

In accordance with section 751(c)(5)(C)(v) of the Act, the Department may treat a review as extraordinarily complicated if it is a review of a transition order (i.e., an order in effect on January 1, 1995). This review concerns a transition order within the meaning of section 751(c)(6)(C)(ii) of the Act. Therefore, on December 22, 1999, the Department determined that the sunset review of the antidumping duty order on cold-rolled carbon steel flat products from Germany is extraordinarily complicated and extended the time limit for completion of the final results of this review until not later than March 29, 2000, in accordance with section 751(c)(5)(B) of the Act. [1]

Scope of Review

The product covered by this review is certain cold-rolled carbon steel flat products from Germany. This scope includes cold-rolled (cold-reduced) carbon steel flat-rolled products, of rectangular shape, neither clad, plated nor coated with metal, whether or not painted, varnished or coated with plastics or other nonmetallic substances, in coils (whether or not in successively superimposed layers) and of a width of 0.5 inch or greater, or in straight lengths which, if of a thickness less than 4.75 millimeters, are of a width of 0.5 inch or greater and which measures at least 10 times the thickness or if of a thickness of 4.75 millimeters or more are of a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the Harmonized Tariff Schedule (“HTS”) under item numbers 7209.11.0000, 7209.12.0030, 7209.12.0090, 7209.13.0030, 7209.13.0090, 7209.14.0030, 7209.14.0090, 7209.21.0000, 7209.22.0000, 7209.23.0000, 7209.24.1000, 7209.24.5000, 7209.31.0000, 7209.32.0000, 7209.33.0000, 7209.34.0000, 7209.41.0000, 7209.42.0000, 7209.43.0000, 7209.44.0000, 7209.90.0000, 7210.70.3000, 7210.90.9000, 7211.30.1030, 7211.30.1090, 7211.30.3000, 7211.30.5000, 7211.41.1000, 7211.41.3030, 7211.41.3090, 7211.41.5000, 7211.41.7030, 7211.41.7060, 7211.41.7090, 7211.49.1030, 7211.49.1090, 7211.49.3000, 7211.49.5030, 7211.49.5060, 7211.49.5090, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7217.11.1000, 7217.11.2000, 7217.11.3000, 7217.19.1000, 7217.19.5000, 7217.21.1000, 7217.29.1000, 7217.29.5000, 7217.31.1000, 7217.39.1000, and 7217.39.5000. Included in this scope are flat-rolled products of non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been worked after rolling)—for example, products which have been bevelled or rounded at the edges. Excluded from this scope is certain shadow mask steel; i.e., aluminum-killed, cold-rolled steel coil that is open-coil annealed, has a carbon content of less than 0.002 percent, is of 0.003 to 0.012 inch in thickness, 15 to 30 inches in width, and has an ultra flat, isotropic surface.

The HTS item numbers are provided for convenience and custom purposes. The written description remains dispositive.

Analysis of Comments Received

All issues raised in substantive responses by parties to this sunset review are addressed in the Issues and Decision Memorandum (“Decision Memo”) from Jeffrey A. May, Director, Office of Policy, Import Administration, to Robert S. LaRussa Acting Assistant Secretary for Import Administration, dated March 29, 2000, which is hereby adopted by this notice. The issues discussed in the attached Decision Memo include the likelihood of continuation or recurrence of dumping and the magnitude of the margin likely to prevail were the order revoked. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendations in this public memorandum which is on file in B-099, the Central Records Unit, of the main Commerce building.

In addition, a complete version of the Decision Memo can be accessed directly on the Web at www.ita.doc.gov/​import_​admin/​records/​frn. The paper copy and electronic version of the Decision Memo are identical in content.

Final Results of Review

We determine that revocation of the antidumping duty order would be likely to lead to continuation or recurrence of dumping at the following percentage weighted-average margins:

Manufacturer/exporterMargin (percent)
Thyssen20.64
Klockner23.54
All others21.66

This notice also serves as the only reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305 of the Department's regulations. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

We are issuing and publishing this determination and notice in accordance with sections section 751(c), 752, and 777(i) of the Act.

Start Signature

Dated: March 29, 2000.

Joseph A. Spetrini,

Acting Assistant Secretary for Import Administration.

End Signature End Supplemental Information

Footnotes

1.  See Extension of Time Limit for Final Results of Five-Year Reviews, 64 FR 71726 (December 22, 1999).

Back to Citation

[FR Doc. 00-8552 Filed 4-5-00; 8:45 am]

BILLING CODE 3510-DS-P