Federal Aviation Administration (FAA), DOT.
Notice of new task assignment for the aviation rulemaking advisory committee (ARAC).
The FAA has assigned the Aviation Rulemaking Advisory Committee a new task to develop recommendations for preventing fires related to fuel tank vent systems. This notice is to inform the public of this ARAC activity.Start Further Info
FOR FURTHER INFORMATION CONTACT:
John McGraw, 1601 Lind Ave., Renton, Washington 98055-4056, 425-227-1171, firstname.lastname@example.org.End Further Info End Preamble Start Supplemental Information
The FAA has established an Aviation Rulemaking Advisory Committee to provide advice and recommendations to the FAA Administrator on the FAA's rulemaking activities with respect to aviation-related issues. This includes obtaining advice and recommendations on the FAA's commitments to harmonize Title 14 of the Code of Federal Regulations (14 CFR) with its partners in Europe and Canada.
Phase I. Review the draft part 25 final rule concerning fuel-vent system fire protection, including the FAA's proposed disposition of public comments. Prepare a report for the FAA documenting any recommended changes resulting from this review and any remaining unresolved issues.
Schedule: This report will be due to the FAA no later than 60 days after receipt of the draft document from the FAA.
Phase II. Review the draft advisory material (AC 25.975) associated with the part 25 rule and prepare a report from the FAA similar to the Phase I report, documenting any recommended changes as well as any remaining unresolved issues.
Schedule: This report will be due to the FAA no later than 6 months after receipt of the draft document from the FAA.
The FAA may ask ARAC's assistance in dispositioning any comments received in response to the publication of a Notice of Availability of a draft advisory circular.
ARAC Acceptance of Tasks
ARAC accepted the task and assigned it to the Powerplant Installation Harmonization Working Group, Transport Airplane and Engine Issues. The working group will serve as staff to ARAC and assist in the analysis of the assigned task. ARAC must review and approve the working group's recommendations. If ARAC accepts the working group's recommendations, it will forward them to the FAA.
Working Group Activity
The Powerplant Installation Harmonization Working group is expected to comply with the procedures adopted by ARAC. As part of the procedures, the working group is expected to:
1. Recommend a work plan for completion of the tasks, including the rationale supporting such a plan for consideration at the next meeting of the ARAC on transport airplane and engine issues held following the publication of this notice.
2. Give a detailed conceptual presentation of the proposed recommendations prior to proceeding with the work stated in item 3 below.
3. Draft the appropriate documents and required analyses and/or any other related materials or documents.
4. Provide a status report at each meeting of the ARAC held to consider transport airplane and engine issues.
Participation in the Working Group
The Powerplant Installation Harmonization Working Group will be composed of technical experts having an interest in the assigned task. A working group member need not be a representative or a member of the full committee.
An individual who has expertise in the subject matter and wishes to become a member of the working group should write to the person listed under the caption FOR FURTHER INFORMATION CONTACT expressing that desire, describing his or her interest in the task, and stating the expertise he or she would bring to the working group. All requests to participate must be received no later than April 30, 2001. The requests will be reviewed by the assistant chair, the assistant executive director, and the working group chair. Individuals will be advised whether or not their request can be accommodated.
Individuals chosen for membership on the working group will be expected to represent their aviation community segment and participate actively in the working group (e.g., attend all meetings, provide written comments when requested to do so, etc.). They also will be expected to devote the resources necessary to support the working group in meeting any assigned deadlines. Members are expected to keep their management chain and those they may represent advised of working group activities and decisions to ensure that the agreed technical solutions do not conflict with their sponsoring organization's position when the subject being negotiated is presented to ARAC for approval.
Once the working group has begun deliberations, members will not be added or substituted without the approval of the assistant chair, the assistance executive director, and the working group chair.
The Secretary of Transportation determined that the formation and use of the ARAC is necessary and in the public interest in connection with the performance of duties imposed on the FAA by law.
Meetings of the ARAC will be open to the public. Meetings of the Powerplant Installation Harmonization Working Group will not be open to the public, except to the extent that individuals with an interest and expertise are selected to participate. The FAA will make no public announcement of working group meetings.Start Signature
Issued in Washington, DC, on March 14, 2001.
Anthony F. Fazio,
Executive Director, Aviation Rulemaking Advisory Committee.
[FR Doc. 01-7057 Filed 3-21-01; 8:45 am]
BILLING CODE 4910-13-M