The Department of Labor (DOL) has submitted the following public information collection request (ICR) to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995 (Public Law 104-13, 44 U.S.C. Chapter 35). a copy of this ICR, with applicable supporting documentation, may be obtained by calling the Department of Labor. To obtain documentation contact Darrin King on 202-693-4129 or E-Mail: King-Darrin@dol.gov.
Comments should be sent to Office of Information and Regulatory Affairs, Attn: OMB Desk Officer for OSHA, Office of Management and Budget, Room 10235, Washington, DC 20503 (202-395-7316), within 30 days from the date of this publication in the Federal Register.
The OMB is particularly interested in comments which:
* Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility;
* Evaluate the accuracy of the agency's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used;
* Enhance the quality, utility, and clarity of the information to be collected; and
* Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses.
Agency: Occupational Safety and Health Administration (OSHA).
Type of Review: Extension of currently approved collection.Start Printed Page 39049
Title: Forging Machines, Inspection Certification Records—29 CFR 1910.218(a)(2)(i) and (a)(2)(ii).
OMB Number: 1218-0228.
Affected Public: Business or other for-profit; Not-for-profit institutions; State, Local, or Tribal Government; and Federal Government.
Type of Response: Recordkeeping and Third-party disclosure.
Number of Respondents: 27,700.
Number of Responses: 1,440,400.
Average Time per Response: 10 minutes (.17 hours).
Annual Burden Hours: 244,868.
Total Annualized Capital/Startup Costs: $0.
Total Annual Costs (operating/maintaining systems or purchasing services): $0.
Description: The Forging Machines Standard (i.e., “the Standard”) specifies two paperwork requirements. The following section describes who uses the information collected under each requirement, as well as how they use it.
Inspection of Forging Machines, Guards, and Point-of-Operation Protection Devices (paragraphs (a)(2)(i) and (a)(2)(ii)). Paragraph (a)(2)(i) requires employers to establish periodic and regular maintenance safety checks, and to develop and keep a certification record of each inspection. The certification record must include the date of inspection, the signature of the person who performed the inspection, and the serial number (or other identifier) of the forging machine inspected.
Under paragraph (a)(2)(ii), employers are to schedule regular and frequent inspections of guards and point-of-operation protection devices, and prepare a certification record of each inspection that contains the date the inspection, the signature of the person who performed the inspection, and the serial number (or other identifier) of the equipment inspected. These inspection certification records provide assurance to employers, employees, and OSHA compliance officers that forging machines, guards, and point-of-operation protection devices have been inspected, thereby assuring that they will operate properly and safely, and prevent impact injury and death to employees during forging operations. These records also provide the most efficient means for the compliance officers to determine that an employer is complying with the Standard.Start Signature
Ira L. Mills,
Departmental Clearance Officer.
[FR Doc. 02-14192 Filed 6-5-02; 8:45 am]
BILLING CODE 4510-26-M