Import Administration, International Trade Administration, Department of Commerce.
August 30, 2002.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Magd Zalok or Tisha Loeper-Viti at (202) 482-4162 or (202) 482-7425, respectively; Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230.
The Applicable Statute and Regulations
Unless otherwise indicated, all citations to the statute are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Tariff Act of 1930 (the Act) by the Uruguay Round Agreements Act (URAA). In addition, unless otherwise indicated, all citations to Department of Commerce (Department) regulations refer to the regulations codified at 19 CFR part 351 (2001).
We determine that carbon and certain alloy steel wire rod from Trinidad and Tobago is being sold, or is likely to be sold, in the United States at less than fair value (LTFV), as provided in section 735 of the Act. The estimated margins of sales at LTFV are shown in the Continuation of Suspension of Liquidation section of this notice.
The preliminary determination in this investigation was issued on April 2, 2002. See Notice of Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination: Carbon and Certain Alloy Steel Wire Rod from Trinidad and Tobago, 67 FR 17379 (April 10, 2002) (Preliminary Determination). Since the publication of the preliminary determination, the following events have occurred:
In April and May 2002, the Department verified the responses submitted by the sole respondent in this investigation, Caribbean Ispat Limited and its affiliates Ispat North America Inc. and Walker Wire (Ispat) Inc. (collectively Carribean Ispat Ltd.). Verification reports were issued in May and June 2002. On June 28, 2002, we received case briefs from the petitioners  and the respondent. On July 3, 2002, we received rebuttal briefs from the petitioners and the respondent. A public hearing was held on July 9, 2002.
Since the Preliminary Determination a number of parties have filed requests asking the Department to exclude various products from the scope of the concurrent antidumping duty (Brazil, Canada, Germany, Indonesia, Mexico, Moldova, Trinidad and Tobago, and Ukraine) and countervailing duty (Brazil, Canada, Germany, Trinidad and Tobago, and Turkey) investigations. On May 6, 2002, Ispat Hamburger Stahlwerke GmbH and Ispat Walzdraht Hochfeld GmbH (collectively, Ispat Germany) requested an exclusion for “super clean valve spring wire.” Two parties filed additional exclusion requests on June 14, 2002: Bluff City Steel asked that the Department exclude “clean-steel precision bar,” and Lincoln Electric Company sought the exclusion of its EW 2512 grade of metal inert gas welding wire. On June 28, 2002, the petitioners filed objections to a range of scope exclusion requests including: (i) Bluff City Steel's request for clean precision bar; (ii) Lincoln Electric Company's request for EW 2512 grade wire rod; (iii) Ispat Germany's request for “super clean valve spring wire;” (iv) Tokusen USA's January 22, 2002 request for 1070 grade tire cord and tire bead quality wire rod (tire cord wire rod); and (v) various parties' request for 1090 grade tire cord wire rod. Start Printed Page 55789
In addition, Moldova Steel Works requested the exclusion of various grades of tire cord wire rod on July 17, 2002. The Rubber Manufacturers Association (the RMA), Ispat Germany, Lincoln Electric and Bluff City filed rebuttals to the petitioners' June 28, 2002, submission on July 8, 11, 17, and 29, 2002, respectively. The RMA filed additional comments on July 30, 2002.
The Department has analyzed these requests and the petitioners' objections and we find no modifications to the scope are warranted. See Memorandum from Richard Weible to Faryar Shirzad, “Carbon and Certain Alloy Steel Wire Rod; Antidumping Duty (Brazil, Canada, Germany, Indonesia, Mexico, Moldova, Trinidad and Tobago, and Ukraine) and Countervailing Duty (Brazil, Canada, Germany, Trinidad and Tobago, and Turkey) Investigations: Requests for Scope Exclusion” dated August 23, 2002, which is on file in room B-099 of the main Commerce building.
Scope of Investigation
The merchandise covered by this investigation is certain hot-rolled products of carbon steel and alloy steel, in coils, of approximately round cross section, 5.00 mm or more, but less than 19.00 mm, in solid cross-sectional diameter.
Specifically excluded are steel products possessing the above-noted physical characteristics and meeting the Harmonized Tariff Schedule of the United States (HTSUS) definitions for (a) stainless steel; (b) tool steel; (c) high nickel steel; (d) ball bearing steel; and (e) concrete reinforcing bars and rods. Also excluded are (f) free machining steel products (i.e., products that contain by weight one or more of the following elements: 0.03 percent or more of lead, 0.05 percent or more of bismuth, 0.08 percent or more of sulfur, more than 0.04 percent of phosphorus, more than 0.05 percent of selenium, or more than 0.01 percent of tellurium).
Also excluded from the scope are 1080 grade tire cord quality wire rod and 1080 grade tire bead quality wire rod. This grade 1080 tire cord quality rod is defined as: (i) Grade 1080 tire cord quality wire rod measuring 5.0 mm or more but not more than 6.0 mm in cross-sectional diameter; (ii) with an average partial decarburization of no more than 70 microns in depth (maximum individual 200 microns); (iii) having no inclusions greater than 20 microns; (iv) having a carbon segregation per heat average of 3.0 or better using European Method NFA 04-114; (v) having a surface quality with no surface defects of a length greater than 0.15 mm; (vi) capable of being drawn to a diameter of 0.30 mm or less with 3 or fewer breaks per ton, and (vii) containing by weight the following elements in the proportions shown: (1) 0.78 percent or more of carbon, (2) less than 0.01 percent of aluminum, (3) 0.040 percent or less, in the aggregate, of phosphorus and sulfur, (4) 0.006 percent or less of nitrogen, and (5) not more than 0.15 percent, in the aggregate, of copper, nickel and chromium.
This grade 1080 tire bead quality rod is defined as: (i) Grade 1080 tire bead quality wire rod measuring 5.5 mm or more but not more than 7.0 mm in cross-sectional diameter; (ii) with an average partial decarburization of no more than 70 microns in depth (maximum individual 200 microns); (iii) having no inclusions greater than 20 microns; (iv) having a carbon segregation per heat average of 3.0 or better using European Method NFA 04-114; (v) having a surface quality with no surface defects of a length greater than 0.2 mm; (vi) capable of being drawn to a diameter of 0.78 mm or larger with 0.5 or fewer breaks per ton; and (vii) containing by weight the following elements in the proportions shown: (1) 0.78 percent or more of carbon, (2) less than 0.01 percent of soluble aluminum, (3) 0.040 percent or less, in the aggregate, of phosphorus and sulfur, (4) 0.008 percent or less of nitrogen, and (5) either not more than 0.15 percent, in the aggregate, of copper, nickel and chromium (if chromium is not specified), or not more than 0.10 percent in the aggregate of copper and nickel and a chromium content of 0.24 to 0.30 percent (if chromium is specified).
The designation of the products as “tire cord quality” or “tire bead quality” indicates the acceptability of the product for use in the production of tire cord, tire bead, or wire for use in other rubber reinforcement applications such as hose wire. These quality designations are presumed to indicate that these products are being used in tire cord, tire bead, and other rubber reinforcement applications, and such merchandise intended for the tire cord, tire bead, or other rubber reinforcement applications is not included in the scope. However, should the petitioners or other interested parties provide a reasonable basis to believe or suspect that there exists a pattern of importation of such products for other than those applications, end-use certification for the importation of such products may be required. Under such circumstances, only the importers of record would normally be required to certify the end use of the imported merchandise.
All products meeting the physical description of subject merchandise that are not specifically excluded are included in this scope.
The products under investigation are currently classifiable under subheadings 7213.91.3010, 7213.91.3090, 7213.91.4510, 7213.91.4590, 7213.91.6010, 7213.91.6090, 7213.99.0031, 7213.99.0038, 7213.99.0090, 7227.20.0010, 7227.20.0020, 7227.20.0090, 7227.20.0095, 7227.90.6051, 7227.90.6053, 7227.90.6058, and 7227.90.6059 of the HTSUS. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this proceeding is dispositive.
Period of Investigation
The period of investigation is July 1, 2000, through June 30, 2001. This period corresponds to the four most recent fiscal quarters prior to the month of the filing of the petition (i.e., August 2001).
As provided in section 782(i) of the Act, we conducted verification of the cost and sales information submitted by the respondent. We used standard verification procedures including examination of relevant accounting and production records, and original source documents provided by the respondent.
Analysis of Comments Received
All issues raised in the case and rebuttal briefs by parties to this antidumping proceeding are listed in the appendix to this notice and addressed in the Decision Memorandum dated August 23, 2002, and are hereby adopted by this notice. The Decision Memorandum is on file in room B-099 of the main Department of Commerce building. In addition, a complete version of the Decision Memorandum can be accessed directly on the World Wide Web at www.ita.doc.gov/import_admin/records/frn. The paper and electronic versions of the Decision Memorandum are identical in content.
Changes Since the Preliminary Determinations
Based on our findings at verification, and analysis of comments received, we have made adjustments to the preliminary determination in calculating the final dumping margin in this proceeding. In addition, we have made a final determination that critical Start Printed Page 55790circumstances do not exist with regard to this case. The adjustments to the dumping margin, as well as a detailed description of the critical circumstances analysis, are discussed in the Decision Memorandum for this investigation.
Continuation of Suspension of Liquidation
In accordance with section 735(c)(1)(B) of the Act, we are directing the Customs Service to continue to suspend liquidation of all entries of steel wire rod exported from Trinidad and Tobago that are entered, or withdrawn from warehouse, for consumption on or after the date of the preliminary determination. The Customs Service shall continue to require a cash deposit or the posting of a bond based on the estimated weighted-average dumping margins shown below. The suspension of liquidation instructions will remain in effect until further notice.
Furthermore, because the Department now determines that critical circumstances do not exist, the suspension of liquidation for all shipments that entered or were withdrawn from warehouse, for consumption prior to April 10, 2002, is terminated. We are directing the Customs Service to refund any cash deposits and release any bonds or other security relating to such shipments.
We determine that the following weighted-average dumping margins exist for Trinidad and Tobago:
|Caribbean Ispat Ltd||11.40|
International Trade Commission Notification
In accordance with section 735(d) of the Act, we have notified the International Trade Commission (ITC) of our determination. The ITC will determine, within 45 days, whether imports of subject merchandise from Trinidad and Tobago are causing material injury, or threaten material injury, to an industry in the United States. If the ITC determines that material injury or threat of injury does not exist, this proceeding will be terminated and all securities posted will be refunded or canceled. If the ITC determines that such injury does exist, the Department will issue an antidumping order directing Customs Service officials to assess antidumping duties on all imports of the subject merchandise entered, or withdrawn from warehouse for consumption on or after the effective date of the suspension of liquidation.
This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
This determination is issued and published in accordance with sections 735(d) and 777(i)(1) of the Act.Start Signature
Dated: August 23, 2002.
Assistant Secretary for Import Administration.
Issues Covered in Decision Memorandum
I. Issues Specific to Sales
Comment 1: Sales of Non-Prime Merchandise
Comment 2: 201 Duties
Comment 3: Critical Circumstances
Comment 4: Minor Corrections (Sales Verification)
II. Issues Specific to Costs
Comment 5: Depreciation on Revalued Assets
Comment 6: Iron Ore Offset
Comment 7: General and Administrative Assets DepreciationEnd Further Info End Preamble
1. The petitioners in this investigation are Co-Steel Raritan, Inc., GS Industries, Inc., Keystone Consolidated Industries, Inc., and North Star Steel Texas, Inc.Back to Citation
2. On August 9, 2002, Bekaert Corporation requested an exclusion for certain high chrome/high silicon steel wire rod from the scope of these investigations. This request was filed too late to be considered for the final determinations in these investigations.Back to Citation
[FR Doc. 02-22248 Filed 8-29-02; 8:45 am]
BILLING CODE 3510-DS-P