Skip to Content


Proposed Change to Paragraph 63, Aircraft Build From Spare and/or Surplus Parts in FAA Order 8130.2E, Airworthiness Certification of Aircraft and Related Products

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble


Federal Aviation Administration (FAA), DOT.


Notice of availability.


After reviewing current policy it has been noted that changes are Start Printed Page 11174needed to better standardize compliance with Title 14 Code of Federal Regulations (14 CFR) chapter 1, subchapter C. This notice announces the availability of a proposed change to paragraph 63 of FAA Order 8130.2E for review and comment. The purpose of this change is to revise guidance and instructions on issuing a standard airworthiness certificate (under § 21.183d) for an aircraft assembled from spare and/or surplus parts when the aircraft has a TC issued under § 21.21, § 21.27, or § 21.29.


Comments submitted must be received no later than April 7, 2003.


Copies of proposed change can be obtained from and comments may be returned to the following: Federal Aviation Administration, Production and Airworthiness Division, AIR-200, Room 815, 800 Independence Avenue, SW., Washington, DC 20591.

Start Further Info


Loyal Woodworth, Federal Aviation Administration, Production and Airworthiness Division, AIR-200, Room 815, 800 Independence Avenue, SW., Washington, DC 20591, (202) 267-8361. E-mail address:

End Further Info End Preamble Start Supplemental Information


Interested persons are invited to comment on the proposed change listed in this notice, by submitting such written data, views, or arguments as they desire to the aforementioned address. Comments must be marked “Comments to Order 8130.2E changes to paragraph 63.” The Director, Aircraft Certification Service, will consider all communications received on or before the closing date, before issuing the final change. Comments received on the proposed change may be examined before and after the comment closing date in Room 815, FAA headquarters building (FOB-10A), 800 Independence Avenue, SW., Washington, DC 20591, between 8:30 a.m. and 4:30 p.m.

Start Signature

Issued in Washington, DC, on February 20, 2003.

Frank P. Paskiewicz,

Manager, Production and Airworthiness Division, AIR-200.

End Signature End Supplemental Information

[FR Doc. 03-5455 Filed 3-6-03; 8:45 am]