Skip to Content

Notice

Certain Small Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe From Romania: Final Results of Antidumping Duty Administrative Review

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

On May 12, 2003, the Department of Commerce (the Department) published the preliminary results of the antidumping duty administrative review of seamless pipe from Romania. This review covers one manufacturer/exporter of the subject merchandise. The period of review is August 1, 2001, through July 31, 2002. Based on our analysis of comments received, these final results do not differ from the preliminary results. The final results are listed below in the “Final Results of Review” section.

EFFECTIVE DATE:

September 17, 2003.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Martin Claessens or Monica Gallardo, Office 5, Group II, AD/CVD Enforcement, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-5451 and (202) 482-3147, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Background

The Department published the preliminary results of the antidumping duty administrative review of certain small diameter carbon and alloy seamless standard, line, and pressure Start Printed Page 54419pipe (seamless pipe) from Romania. See Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Romania: Preliminary Results of Antidumping Duty Administrative Review, 68 FR 25335 (May 12, 2003) (Preliminary Results). The review covers one manufacturer/exporter, S.C. Silcotub S.A. (Silcotub).

We invited parties to comment on our preliminary results of review. Silcotub, the only interested party to submit comments, filed a brief on June 11, 2003.

Scope of the Order

The products covered by the order are seamless carbon and alloy (other than stainless) steel standard, line, and pressure pipes and redraw hollows produced, or equivalent, to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and the API 5L specifications and meeting the physical parameters described below, regardless of application. The scope of the order also includes all products used in standard, line, or pressure pipe applications and meeting the physical parameters described below, regardless of specification. Specifically included within the scope of the order are seamless pipes and redraw hollows, less than or equal to 4.5 inches (114.3 mm) in outside diameter, regardless of wall-thickness, manufacturing process (hot finished or cold-drawn), end finish (plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish.

The seamless pipes subject to the order are currently classifiable under the subheadings 7304.10.10.20, 7304.10.50.20, 7304.31.30.00, 7304.31.60.50, 7304.39.00.16, 7304.39.00.20, 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.51.50.05, 7304.51.50.60, 7304.59.60.00, 7304.59.80.10, 7304.59.80.15, 7304.59.80.20, and 7304.59.80.25 of the Harmonized Tariff Schedule of the United States (HTSUS).

Specifications, Characteristics, and Uses: Seamless pressure pipes are intended for the conveyance of water, steam, petrochemicals, chemicals, oil products, natural gas and other liquids and gasses in industrial piping systems. They may carry these substances at elevated pressures and temperatures and may be subject to the application of external heat. Seamless carbon steel pressure pipe meeting the ASTM A-106 standard may be used in temperatures of up to 1000 degrees Fahrenheit, at various ASME code stress levels. Alloy pipes made to ASTM A-335 standard must be used if temperatures and stress levels exceed those allowed for ASTM A-106. Seamless pressure pipes sold in the United States are commonly produced to the ASTM A-106 standard.

Seamless standard pipes are most commonly produced to the ASTM A-53 specification and generally are not intended for high temperature service. They are intended for the low temperature and pressure conveyance of water, steam, natural gas, air and other liquids and gasses in plumbing and heating systems, air conditioning units, automatic sprinkler systems, and other related uses. Standard pipes (depending on type and code) may carry liquids at elevated temperatures but must not exceed relevant ASME code requirements. If exceptionally low temperature uses or conditions are anticipated, standard pipe may be manufactured to ASTM A-333 or ASTM A-334 specifications.

Seamless line pipes are intended for the conveyance of oil and natural gas or other fluids in pipe lines. Seamless line pipes are produced to the API 5L specification.

Seamless water well pipe (ASTM A-589) and seamless galvanized pipe for fire protection uses (ASTM A-795) are used for the conveyance of water.

Seamless pipes are commonly produced and certified to meet ASTM A-106, ASTM A-53, API 5L-B, and API 5L-X42 specifications. To avoid maintaining separate production runs and separate inventories, manufacturers typically triple or quadruple certify the pipes by meeting the metallurgical requirements and performing the required tests pursuant to the respective specifications. Since distributors sell the vast majority of this product, they can thereby maintain a single inventory to service all customers.

The primary application of ASTM A-106 pressure pipes and triple or quadruple certified pipes is use in pressure piping systems by refineries, petrochemical plants, and chemical plants. Other applications are in power generation plants (electrical-fossil fuel or nuclear), and in some oil field uses (on shore and off shore) such as for separator lines, gathering lines and metering runs. A minor application of this product is for use as oil and gas distribution lines for commercial applications. These applications constitute the majority of the market for the subject seamless pipes. However, ASTM A-106 pipes may be used in some boiler applications.

Redraw hollows are any unfinished pipe or “hollow profiles” of carbon or alloy steel transformed by hot rolling or cold drawing/hydrostatic testing or other methods to enable the material to be sold under ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications.

The scope of the order includes all seamless pipe meeting the physical parameters described above and produced to one of the specifications listed above, regardless of application, with the exception of the specific exclusions discussed below, and whether or not also certified to a non-covered specification. Standard, line, and pressure applications and the above-listed specifications are defining characteristics of the scope of the order. Therefore, seamless pipes meeting the physical description above, but not produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications shall be covered if used in a standard, line, or pressure application, with the exception of the specific exclusions discussed below.

For example, there are certain other ASTM specifications of pipe which, because of overlapping characteristics, could potentially be used in ASTM A-106 applications. These specifications generally include ASTM A-161, ASTM A-192, ASTM A-210, ASTM A-252, ASTM A-501, ASTM A-523, ASTM A-524, and ASTM A-618. When such pipes are used in a standard, line, or pressure pipe application, with the exception of the specific exclusions discussed below, such products are covered by the scope of the order.

Specifically excluded from the scope of the order are boiler tubing and mechanical tubing, if such products are not produced to ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications and are not used in standard, line, or pressure pipe applications. In addition, finished and unfinished OCTG are excluded from the scope of the order, if covered by the scope of another antidumping duty order from the same country. If not covered by such an OCTG order, finished and unfinished OCTG are included in this scope when used in standard, line or pressure applications.

With regard to the excluded products listed above, the Department will not instruct the Bureau of Customs and Border Protection (BCBP) to require end-use certification until such time as petitioner or other interested parties provide to the Department a reasonable basis to believe or suspect that the products are being used in a covered application. If such information is provided, we will require end-use Start Printed Page 54420certification only for the product(s) (or specification(s)) for which evidence is provided that such products are being used in covered applications as described above. For example, if, based on evidence provided by petitioner, the Department finds a reasonable basis to believe or suspect that seamless pipe produced to the A-161 specification is being used in a standard, line or pressure application, we will require end-use certifications for imports of that specification. Normally we will require only the importer of record to certify to the end use of the imported merchandise. If it later proves necessary for adequate implementation, we may also require producers who export such products to the United States to provide such certification on invoices accompanying shipments to the United States.

Although the HTSUS subheadings are provided for convenience and BCBP purposes, our written description of the merchandise subject to this scope is dispositive.

Separate Rates

Because we are conducting this review in accordance with 19 CFR 351.408, we are applying non-market economy methodology for Silcotub in this review.[1] Silcotub has requested a separate, company-specific antidumping duty rate in this review. In the preliminary results, we found that Silcotub had met the criteria for the application of separate antidumping duty rates. See Preliminary Results, 68 FR at 25336-25337. We have not received any other information since the preliminary results which would warrant reconsideration of our separate rates determination with respect to this company. We therefore determine that Silcotub should be assigned an individual dumping margin in this administrative review.

Analysis of Comments Received

All issues raised in the one case brief received in this review are addressed in the “Issues and Decision Memorandum” (Decision Memorandum) from Holly A. Kuga, Acting Deputy Assistant Secretary, Import Administration, to James J. Jochum, Assistant Secretary for Import Administration, dated September 9, 2003, which is hereby adopted by this notice.

A list of the issues which parties have raised and to which we have responded in the Decision Memorandum is attached to this notice as an Appendix. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendations in this public memorandum, which is on file in the Central Records Unit, room B-099 of the main Commerce building.

In addition, a complete version of the Decision Memorandum can be accessed directly on the Internet at http://ia.ita.doc.gov/​. The paper copy and electronic version of the Decision Memorandum are identical in content.

Final Results of Review

As a result of our review, we determine that the following weighted-average percentage margin exists for the period August 1, 2001, through July 31, 2002:

Manufacturer/exporterMargin (percent)
S.C. Silcotub S.A.0.00

The Department shall determine, and the BCBP shall assess, antidumping duties on all appropriate entries. In accordance with 19 CFR 351.212(b)(1), we have calculated importer-specific assessment rates by dividing the dumping margin found on the subject merchandise examined by the entered value of such merchandise. Where the importer-specific assessment rate is above de minimis we will instruct the BCBP to assess antidumping duties on that importer's entries of subject merchandise. The Department will issue appropriate assessment instructions directly to the BCBP within 15 days of publication of these final results of review.

Furthermore, the following deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of these final results of administrative review, as provided by section 751(a) of the Tariff Act of 1930, as amended (the Act): (1) For Silcotub, because the margin is zero, no cash deposit will be required; (2) for merchandise exported by manufacturers or exporters not covered in this review but covered in a previous segment of this proceeding, the cash deposit rate will continue to be the company-specific rate published in the prior segment of the proceeding in which that manufacturer or exporter participated; (3) if the exporter is not a firm covered in this review or in any previous segment of this proceeding, but the manufacturer is, the cash deposit rate will be that established for the manufacturer of the merchandise in these final results of review or in the most recent segment of the proceeding in which that manufacturer participated; and (4) if neither the exporter nor the manufacturer is a firm covered in this review or in any previous segment of this proceeding, the cash deposit rate will be 13.06 percent, the Romania-wide rate established in the less-than-fair-value investigation. These deposit requirements shall remain in effect until publication of the final results of the next administrative review.

This notice also serves as the final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred, and in the subsequent assessment of double antidumping duties.

This notice also serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return/destruction or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO.

This determination is issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

Start Signature
Start Printed Page 54421

Dated: September 9, 2003.

Joseph A. Spetrini,

Acting Assistant Secretary for Import Administration.

End Signature

Appendix

Comments and Responses

Comment 1: Use of Fidelity Steel Manufacturing Corporation's Financial Statements to Calculate Overhead, Selling, General, and Administrative Expenses, and Profit.

Comment 2: Valuation of Natural Gas.

End Supplemental Information

Footnotes

1.  In Certain Small Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from Romania: Final Results of Antidumping Duty Administrative Review, 68 FR 12672, 12673 (March 17, 2003), the Department reviewed the non-market economy status of Romania and determined to reclassify Romania as a market economy for purposes of antidumping and countervailing duty proceedings, pursuant to section 771(18)(A) of the Act, effective January 1, 2003. See Memorandum from Lawrence Norton, Import Policy Analyst, to Joseph Spetrini, Acting Assistant Secretary for Import Administration: Antidumping Duty Administrative Review of Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe from Romania—Non-Market Economy Status Review (March 10, 2003), placed on the record of this administrative review. The March 10, 2003 decision with respect to Romania's NME status provided that:

This finding will apply to all future administrative proceedings covering periods of investigation or review that fall after January 1, 2003. Where a proceeding's period of investigation or review begins before January 1, 2003, but ends after that date, the Department will use the standard market economy methodology if it determines that a sufficient period of time has passed so that adequate market economy data is available. In addition, the U.S. countervailing duty law will apply now to Romania where the proceeding at issue involves an adequate period of investigation after this effective date.

Back to Citation

[FR Doc. 03-23620 Filed 9-16-03; 8:45 am]

BILLING CODE 3510-25-P