Skip to Content

Notice

Office of Hazardous Materials Safety; Notice of Applications for Modification of Exemption

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Research and Special Programs Administration, DOT.

ACTION:

List of applications for modification of exemption.

SUMMARY:

In accordance with the procedures governing the application for, and the processing of, exemptions from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the Start Printed Page 68211application described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Request of modifications of exemptions (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix “M” denote a modification request. There applications have been separated from the new application for exemption to facilitate processing.

DATES:

Comments must be received on or before December 8, 2004.

Address Comments To: Record Center, Research and Special Programs Administration, U.S. Department of Transportation, Washington, DC 20590.

Comments should refer to the application number and be submitted in triplicate. If Confirmation of receipt of comments is desired, include a self-addressed stamped postcard showing the exemption number.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Copies of the applications are available for inspection in the Records Center, Nassif Building, 400 7th Street SW., Washington DC or at http://dms.dot.gov.

This notice of receipt of applications for modification of exemption is published in accordance with Part 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)).

Start Signature

Issued In Washington, DC, on November 16, 2004.

R. Ryan Posten,

Exemptions Program Officer, Office of Hazardous Materials Exemptions & Approvals.

End Signature

Modification Exemptions

Application numberDocket numberApplicantRegulation(s) affectedModification of exemptionNature of exemption thereof
10798-MOlin Corporation Cleveland, TN49 CFR 174.67(i), (j)10798To modify the exemption to authorize the transportation of an additional Class 8 material in DOT Specification tank cars.
10985-MGeorgia-Pacific Corporation Atlanta, GA49 CFR 174.67(i), (j)10985To modify the exemption to authorize the transportation of Class 3, Division 6.1 and additional Class 8 materials in DOT Specification tank cars.
12274-MRSPA-99-5707Snow Peak USA, Inc. Clackamas, OR49 CFR 173.304(a)(d)(3)(ii)12274To modify the exemption to authorize the transportation of an additional Division 2.1 material in non-DOT specification nonrefillable inside containers.
12783-MRSPA-01-10309CryoSurgery, Inc. Nashville, TN49 CFR 173.304a(a)(1); 173.306(a)12783To modify the exemption to allow up to 18 oz. non-DOT specification nonrefillable containers be filled to 55% filling density for the transportation of ORM-D materials.
12920-MRSPA-02-11638Epichem, Inc. Haverhill, MA49 CFR 173.181(c)12920To modify the exemption to authorize the transportation of an additional Division 4.2 material in combination packagings with inner containers that exceed currently authorized quantities.
12988-MRSPA-02-12215Air Products and Chemicals, Inc. Allentown, PA49 CFR 173.304; 179.30012988To modify the exemption to update the non-DOT specification design drawings, the material of construction requirements and the minimum burst pressure from 249 bar to 240 bar.
13182-MRSPA-02-14023Cytec Industries Inc. West Paterson, NJ49 CFR 173.304a(b)13182To modify the exemption to authorize domestic distribution of DOT Specification cylinders containing a certain Division 2.3 material filled to liquid full at 130 degrees F.
13208-MRSPA-03-14944Provensis Limited, Keaton House49 CFR 171.11(d)(7) and (14); 171.12(b)(17); 173.302(a)(1); Part 174; Part 177;13208To modify the exemption to authorize the transportation of an additional Division 2.2 material in DOT Specification 2Q containers and relief from certain operational controls and modal requirements.
13344-MRSPA-04-16868Precision Technik Atlanta, GA49 CFR 173.301(a)(d)(1); 180.209; 173.201; 173.202; 173.203; 173.302; 173.30413344To modify the exemption to authorize the addition of a bottom liquid drain valve and rail mount brackets to the non-DOT specification salvage cylinder.
13565-MRSPA-04-17863H.C. Starck, Inc. Newton, MA49 CFR 173.21113565To reissue the exemption originally issued on an emergency basis for the transportation of Division 4.3 material in alternative packaging (an accumulator).
13601-MRSPA-04-18713DS Containers, Inc. Lemont, IL49 CFR 173.306(b)(1); 175.313601To modify the exemption to authorize a pressure relief device in the bottom end of the non-DOT specification inner nonrefillable metal container with a venting pressure not below 175 psi.
Start Printed Page 68212 End Further Info End Preamble

[FR Doc. 04-25888 Filed 11-22-04; 8:45 am]

BILLING CODE 4909-60-M