Skip to Content

Notice

Revocation of Antidumping Duty Orders: Certain Small Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from the Czech Republic and South Africa

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

On May 2, 2005, the Department of Commerce (the Department) initiated its sunset reviews of the antidumping duty orders on small diameter seamless standard, line, and pressure pipe (seamless pipe) from the Czech Republic, Japan, Romania and South Africa. See Initiation of Five-year (“Sunset”) Reviews, 70 FR 22632 (May 2, 2005). Pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act), the International Trade Commission (the Commission) in its sunset reviews determined that revocation of the orders on seamless pipe from the Czech Republic and South Africa would not be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. See Carbon and Alloy Seamless Standard, Line, and Pressure Pipe From the Czech Republic, Japan, Mexico, Romania, and South Africa, 71 FR 24860 (April 27, 2006). Therefore, pursuant to section 751(d)(2) of the Act and 19 CFR 351.222(i)(1)(iii), the Department is revoking the antidumping duty orders on seamless pipe from the Czech Republic and South Africa.

EFFECTIVE DATE:

June 26, 2005 for South Africa; August 14, 2005 for the Czech Republic.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Robert James, AD/CVD Operations Office 7, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-0649.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Scope of the Orders

The products covered by the orders are seamless carbon and alloy (other than stainless) steel standard, line, and pressure pipes and redraw hollows produced, or equivalent, to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and the API 5L specifications and meeting the physical parameters described below, regardless of application. The scope of the orders also includes all products used in standard, line, or pressure pipe applications and meeting the physical parameters described below, regardless of specification. Specifically included within the scope of the orders are seamless pipes and redraw hollows, less than or equal to 4.5 inches (114.3 mm) in outside diameter, regardless of wall-thickness, manufacturing process (hot finished or cold-drawn), end finish (plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish.

The seamless pipes subject to the orders are currently classifiable under the subheadings 7304.10.10.20, 7304.10.50.20, 7304.31.30.00, 7304.31.60.50, 7304.39.00.16, 7304.39.00.20, 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.51.50.05, 7304.51.50.60, 7304.59.60.00, 7304.59.80.10, 7304.59.80.15, 7304.59.80.20, and 7304.59.80.25 of the Harmonized Tariff Schedule of the United States (HTSUS).

Specifications, Characteristics, and Uses: Seamless pressure pipes are intended for the conveyance of water, steam, petrochemicals, chemicals, oil products, natural gas and other liquids and gases in industrial piping systems. They may carry these substances at elevated pressures and temperatures and may be subject to the application of external heat. Seamless carbon steel pressure pipe meeting the ASTM A-106 standard may be used in temperatures of up to 1000 degrees Fahrenheit, at various ASME code stress levels. Alloy pipes made to ASTM A-335 standard must be used if temperatures and stress levels exceed those allowed for ASTM A-106. Seamless pressure pipes sold in the United States are commonly produced to the ASTM A-106 standard.

Seamless standard pipes are most commonly produced to the ASTM A-53 specification and generally are not intended for high temperature service. They are intended for the low temperature and pressure conveyance of water, steam, natural gas, air and other liquids and gases in plumbing and heating systems, air conditioning units, automatic sprinkler systems, and other related uses. Standard pipes (depending on type and code) may carry liquids at elevated temperatures but must not exceed relevant ASME code requirements. If exceptionally low temperature uses or conditions are anticipated, standard pipe may be manufactured to ASTM A-333 or ASTM A-334 specifications.

Seamless line pipes are intended for the conveyance of oil and natural gas or other fluids in pipe lines. Seamless line Start Printed Page 27464pipes are produced to the API 5L specification.

Seamless water well pipe (ASTM A-589) and seamless galvanized pipe for fire protection uses (ASTM A-795) are used for the conveyance of water.

Seamless pipes are commonly produced and certified to meet ASTM A-106, ASTM A-53, API 5L-B, and API 5L-X42 specifications. To avoid maintaining separate production runs and separate inventories, manufacturers typically triple or quadruple certify the pipes by meeting the metallurgical requirements and performing the required tests pursuant to the respective specifications. Since distributors sell the vast majority of this product, they can thereby maintain a single inventory to service all customers.

The primary application of ASTM A-106 pressure pipes and triple or quadruple certified pipes is use in pressure piping systems by refineries, petrochemical plants, and chemical plants. Other applications are in power generation plants (electrical-fossil fuel or nuclear), and in some oil field uses (on shore and off shore) such as for separator lines, gathering lines and metering runs. A minor application of this product is for use as oil and gas distribution lines for commercial applications. These applications constitute the majority of the market for the subject seamless pipes. However, ASTM A-106 pipes may be used in some boiler applications.

Redraw hollows are any unfinished pipe or “hollow profiles” of carbon or alloy steel transformed by hot rolling or cold drawing/ hydrostatic testing or other methods to enable the material to be sold under ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications.

The scope of the orders includes all seamless pipe meeting the physical parameters described above and produced to one of the specifications listed above, regardless of application, with the exception of the specific exclusions discussed below, and whether or not also certified to a non-covered specification. Standard, line, and pressure applications and the above-listed specifications are defining characteristics of the scope of the orders. Therefore, seamless pipes meeting the physical description above, but not produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications shall be covered if used in a standard, line, or pressure application, with the exception of the specific exclusions discussed below. For example, there are certain other ASTM specifications of pipe which, because of overlapping characteristics, could potentially be used in ASTM A-106 applications. These specifications generally include ASTM A-161, ASTM A-192, ASTM A-210, ASTM A-252, ASTM A-501, ASTM A-523, ASTM A-524, and ASTM A-618. When such pipes are used in a standard, line, or pressure pipe application, with the exception of the specific exclusions discussed below, such products are covered by the scope of the orders.

Specifically excluded from the scope of the orders are boiler tubing and mechanical tubing, if such products are not produced to ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications and are not used in standard, line, or pressure pipe applications. In addition, finished and unfinished oil country tubular goods (OCTG) are excluded from the scope of the orders, if covered by the scope of another antidumping duty order from the same country. If not covered by such an OCTG order, finished and unfinished OCTG are included in this scope when used in standard, line or pressure applications.

With regard to the excluded products listed above, the Department will not instruct U.S. Customs and Border Protection (CBP) to require end-use certification until such time as petitioner or other interested parties provide to the Department a reasonable basis to believe or suspect that the products are being used in a covered application. If such information is provided, we will require end-use certification only for the product(s) (or specification(s)) for which evidence is provided that such products are being used in covered applications as described above. For example, if, based on evidence provided by petitioner, the Department finds a reasonable basis to believe or suspect that seamless pipe produced to the A-161 specification is being used in a standard, line or pressure application, we will require end-use certifications for imports of that specification. Normally we will require only the importer of record to certify to the end use of the imported merchandise. If it later proves necessary for adequate implementation, we may also require producers who export such products to the United States to provide such certification on invoices accompanying shipments to the United States.

Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the merchandise subject to this scope is dispositive.

Background

On June 26, 2000, the Department published the antidumping duty orders on small-diameter (defined as less than or equal to 4 1/2 inches) seamless pipe from South Africa. See Notice of Antidumping Duty Orders: Certain Large Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe from Japan; and Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Japan and the Republic of South Africa, 65 FR 39360 (June 26, 2000). On August 14, 2000, the Department issued the antidumping duty order on seamless pipe from the Czech Republic. See Notice of Antidumping Duty Order: Certain Small-Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from the Czech Republic, 65 FR 49539 (August 14, 2000).

On May 2, 2005, the Department initiated, and the Commission instituted, sunset reviews of the antidumping duties orders on seamless pipe from the Czech Republic and South Africa. See Initiation of Five-year (“Sunset”) Reviews, 70 FR 22632 (May 2, 2005). As a result of its review, the Department found that revocation of the antidumping duty orders would be likely to lead to continuation or recurrence of dumping, and notified the Commission of the magnitude of the margin likely to prevail were the orders to be revoked. See Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Under 4 1/2 inches) from the Czech Republic, Japan, Romania, and South Africa; Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders, 70 FR 53151 (September 7, 2005). On April 6, 2006, the Commission determined, pursuant to section 751(c) of the Act, that revocation of the antidumping duty orders on seamless pipe from the Czech Republic and South Africa would not be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. See Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from the Czech Republic, Japan, Mexico, Romania, and South Africa, 71 FR 24860 (April 27, 2006) and USITC Publication 3850 (April 2006), entitled Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from the Czech Republic, Japan, Mexico, Romania, and South Africa (Inv. Nos. 731-TA-846-850 (Review). As a result of the determination by the Commission that revocation of these orders is not likely to lead to continuation or recurrence of Start Printed Page 27465material injury to an industry in the United States, the Department, pursuant to section 751(d) of the Act, is revoking the orders on small diameter seamless pipe from the Czech Republic and South Africa. Pursuant to section 751(d)(2) of the Act and 19 CFR 351.222(i)(2)(i), the effective date of revocation is June 26, 2005, for the antidumping duty order on South Africa, and August 14, 2005, for the antidumping duty order on the Czech Republic (i.e., the fifth anniversary of the date of publication in the Federal Register of the notices of the antidumping duty orders on the South Africa and the Czech Republic, respectively).

The Department will notify CBP to discontinue suspension of liquidation and collection of cash deposits on entries of the subject merchandise entered or withdrawn from warehouse on or after June 26, 2005, and August 14, 2005, the effective dates of revocation of the respective antidumping duty orders. The Department will complete any pending administrative reviews of these orders and will conduct administrative reviews of subject merchandise entered prior to the effective date of revocation in response to appropriately filed requests for review.

These five-year sunset reviews and notice are in accordance with section 751(d)(2) of the Tariff Act and published pursuant to section 777(i)(1) of the Tariff Act.

Start Signature

Dated: May 5, 2006.

David M. Spooner,

Assistant Secretary for Import Administration.

End Signature End Supplemental Information

[FR Doc. E6-7231 Filed 5-10-06; 8:45 am]

BILLING CODE 3510-DS-S