This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
Federal Aviation Administration (FAA), Department of Transportation (DOT).
Final rule; request for comments.
The FAA is revising an existing airworthiness directive (AD), which applies to all Boeing Model 777 airplanes. That AD currently requires a one-time inspection to determine the part number of the left and right air supply and cabin pressure controllers (ASCPCs), and installation of new ASCPC software if necessary. This AD requires those same actions. This AD also revises the existing AD to allow installation of an ASCPC with additional versions of software installed and to correct a part number reference. This AD results from a report of an ASCPC failure during flight. We are issuing this AD to prevent an ASCPC failure that could stop airflow into the airplane, inhibit the cabin altitude warning message, and cause an incorrect display of cabin altitude. These failures could result in depressurization of the airplane without warning.
The effective date of this AD is April 18, 2007.
On April 18, 2007 (72 FR 15820, April 3, 2007), the Director of the Federal Register approved the incorporation by reference of Boeing Service Bulletin 777-36A0026, Revision 1, dated February 8, 2007. Start Printed Page 19381
We must receive any comments on this AD by June 18, 2007.
Use one of the following addresses to submit comments on this AD:
- DOT Docket Web site: Go to http://dms.dot.gov and follow the instructions for sending your comments electronically.
- Government-wide rulemaking Web site: Go to http://www.regulations.gov and follow the instructions for sending your comments electronically.
- Mail: Docket Management Facility; U.S. Department of Transportation, 400 Seventh Street, SW., Nassif Building, Room PL-401, Washington, DC 20590.
- Fax: (202) 493-2251.
- Hand Delivery: Room PL-401 on the plaza level of the Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Contact Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207, for service information identified in this AD.Start Further Info
FOR FURTHER INFORMATION CONTACT:
David Webber, Aerospace Engineer, Cabin Safety and Environmental Systems Branch, ANM-150S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 917-6451; fax (425) 917-6590.End Further Info End Preamble Start Supplemental Information
On March 21, 2007, we issued AD 2007-07-05, amendment 39-15010 (72 FR 15820, April 3, 2007). That AD applies to all Boeing Model 777 airplanes. That AD requires a one-time inspection to determine the part number of the left and right air supply and cabin pressure controllers (ASCPCs), and installation of new ASCPC software if necessary. That AD resulted from a report of an ASCPC failure during flight. The actions specified in that AD are intended to prevent an ASCPC failure that could stop airflow into the airplane, inhibit the cabin altitude warning message, and cause an incorrect display of cabin altitude. These failures could result in depressurization of the airplane without warning.
Actions Since AD Was Issued
Since we issued that AD, we have determined that additional versions of the ASCPC software should be permitted. In paragraph (i) of that AD (“Installation of Certain OPS Software Prohibited”), we cited a specific part number of operational program software (OPS) that must be installed in ASCPCs before they can be installed on any airplane as of the effective date of that AD. By citing that specific part number, we inadvertently prohibited use of later, acceptable versions of the OPS. This was not our intent.
We have also determined that, in that same paragraph, there is a typographical error resulting in an incorrect ASCPC part number.
FAA's Determination and Requirements of This AD
The unsafe condition described previously is likely to exist or develop on other airplanes of the same type design. For this reason, we are issuing this AD to revise AD 2007-07-05. This new AD retains the requirements of the existing AD. This AD also revises the existing AD to allow installation of an ASCPC with additional versions of software installed and to correct a part number reference.
FAA's Determination of the Effective Date
An unsafe condition exists that requires the immediate adoption of this AD; therefore, providing notice and opportunity for public comment before the AD is issued is impracticable, and good cause exists to make this AD effective in less than 30 days.
This AD is a final rule that involves requirements that affect flight safety and was not preceded by notice and an opportunity for public comment; however, we invite you to submit any relevant written data, views, or arguments regarding this AD. Send your comments to an address listed in the ADDRESSES section. Include “Docket No. FAA-2007-27898; Directorate Identifier 2007-NM-078-AD” at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of the AD that might suggest a need to modify it.
We will post all comments we receive, without change, to http://dms.dot.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact with FAA personnel concerning this AD. Using the search function of that Web site, anyone can find and read the comments in any of our dockets, including the name of the individual who sent the comment (or signed the comment on behalf of an association, business, labor union, etc.). You may review the DOT's complete Privacy Act Statement in the Federal Register published on April 11, 2000 (65 FR 19477-78), or you may visit http://dms.dot.gov.
Examining the Dockets
You may examine the AD docket on the Internet at http://dms.dot.gov, or in person at the Docket Management Facility office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The Docket Management Facility office (telephone (800) 647-5227) is located on the plaza level of the Nassif Building at the DOT street address stated in the ADDRESSES section. Comments will be available in the AD docket shortly after the Docket Management System receives them.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, Section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701, “General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that the regulation:
1. Is not a “significant regulatory action” under Executive Order 12866;
2. Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and
3. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to comply with this AD and placed it in the AD docket. See the ADDRESSES section for a location to examine the regulatory evaluation.Start List of Subjects Start Printed Page 19382
List of Subjects in 14 CFR Part 39End List of Subjects
Adoption of the AmendmentStart Amendment Part
Accordingly, under the authority delegated to me by the Administrator, the FAA amends part 39 of the Federal Aviation Regulations (End Amendment Part Start Part
PART 39—AIRWORTHINESS DIRECTIVESEnd Part Start Amendment Part
1. The authority citation for part 39 continues to read as follows:End Amendment Part
2. The Federal Aviation Administration (FAA) amends § 39.13 by removing amendment 39-15010 (End Amendment Part
2007-07-05 R1 Boeing: Amendment 39-15029. Docket No. FAA-2007-27898; Directorate Identifier 2007-NM-078-AD.
(a) The effective date of this AD is April 18, 2007.
(b) This AD revises AD 2007-07-05.
(c) This AD applies to all Boeing Model 777-200, -200LR, -300, and -300ER series airplanes, certificated in any category.
(d) This AD results from a report of an air supply and cabin pressure controller (ASCPC) failure during flight. We are issuing this AD to prevent an ASCPC failure that could stop airflow into the airplane, inhibit the cabin altitude warning message, and cause an incorrect display of cabin altitude. These failures could result in depressurization of the airplane without warning.
(e) You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Inspection to Determine Part Number (P/N) of the ASCPCs
(f) For all airplanes: Within 90 days after the effective date of this AD, perform an inspection of the left and right ASCPCs to determine the part number.
ASCPC Software Installation
(g) For airplanes on which any ASCPC having P/N 1152972-4 is found during the inspection required by paragraph (f) of this AD: Within 90 days after the effective date of this AD, install new ASCPC operational program software (OPS) in accordance with the Accomplishment Instructions of Boeing Service Bulletin 777-36A0026, Revision 1, dated February 8, 2007.
Installation of Certain OPS Prohibited
(h) As of the effective date of this AD, installation of OPS P/N 3673-GRS-101-00, P/N 3670-GRS-102-00, or P/N 3671-GRS-103-00 is prohibited.
(i) As of the effective date of this AD, no person may install an ASCPC, P/N 1152972-4, on any airplane, unless it has had ASCPC OPS version P/N 3676-GRS-104-00 or later installed in accordance with paragraph (g) of this AD.
Credit for Actions Done Using Previous Service Information
(j) Actions accomplished before the effective date of this AD in accordance with Boeing Alert Service Bulletin 777-36A0026, dated December 19, 2006, are considered acceptable for compliance with the corresponding actions specified in this AD.
Alternative Methods of Compliance (AMOCs)
(k)(1) The Manager, Seattle Aircraft Certification Office, FAA, has the authority to approve AMOCs for this AD, if requested in accordance with the procedures found in 14 CFR 39.19.
(2) To request a different method of compliance or a different compliance time for this AD, follow the procedures in 14 CFR 39.19. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO.
Material Incorporated by Reference
(l) You must use Boeing Service Bulletin 777-36A0026, Revision 1, dated February 8, 2007, to perform the actions that are required by this AD, unless the AD specifies otherwise. The Director of the Federal Register approved the incorporation by reference of this document on April 18, 2007 (72 FR 15820, April 3, 2007). Contact Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207, for a copy of this service information. You may review copies at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.Start Signature
Issued in Renton, Washington, on April 12, 2007.
Manager, Transport Airplane Directorate, Aircraft Certification Service.
[FR Doc. 07-1936 Filed 4-16-07; 11:59 am]
BILLING CODE 4910-13-P