Skip to Content

Notice

Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble Start Printed Page 63735

In accordance with Section 223 of the Trade Act of 1974, as amended (19 U.S.C. 2273) the Department of Labor herein presents summaries of determinations regarding eligibility to apply for trade adjustment assistance for workers (TA-W) number and alternative trade adjustment assistance (ATAA) by (TA-W) number issued during the period of October 6 through October 10, 2008.

In order for an affirmative determination to be made for workers of a primary firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(a) of the Act must be met.

I. Section (a)(2)(A) all of the following must be satisfied:

A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially separated, or are threatened to become totally or partially separated;

B. The sales or production, or both, of such firm or subdivision have decreased absolutely; and

C. Increased imports of articles like or directly competitive with articles produced by such firm or subdivision have contributed importantly to such workers' separation or threat of separation and to the decline in sales or production of such firm or subdivision; or

II. Section (a)(2)(B) both of the following must be satisfied:

A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially separated, or are threatened to become totally or partially separated;

B. There has been a shift in production by such workers' firm or subdivision to a foreign country of articles like or directly competitive with articles which are produced by such firm or subdivision; and

C. One of the following must be satisfied:

1. The country to which the workers' firm has shifted production of the articles is a party to a free trade agreement with the United States;

2. The country to which the workers' firm has shifted production of the articles to a beneficiary country under the Andean Trade Preference Act, African Growth and Opportunity Act, or the Caribbean Basin Economic Recovery Act; or

3. There has been or is likely to be an increase in imports of articles that are like or directly competitive with articles which are or were produced by such firm or subdivision.

Also, in order for an affirmative determination to be made for secondarily affected workers of a firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(b) of the Act must be met.

(1) Significant number or proportion of the workers in the workers' firm or an appropriate subdivision of the firm have become totally or partially separated, or are threatened to become totally or partially separated;

(2) The workers' firm (or subdivision) is a supplier or downstream producer to a firm (or subdivision) that employed a group of workers who received a certification of eligibility to apply for trade adjustment assistance benefits and such supply or production is related to the article that was the basis for such certification; and

(3) Either—

(A) The workers' firm is a supplier and the component parts it supplied for the firm (or subdivision) described in paragraph (2) accounted for at least 20 percent of the production or sales of the workers' firm; or

(B) A loss or business by the workers' firm with the firm (or subdivision) described in paragraph (2) contributed importantly to the workers' separation or threat of separation.

In order for the Division of Trade Adjustment Assistance to issue a certification of eligibility to apply for Alternative Trade Adjustment Assistance (ATAA) for older workers, the group eligibility requirements of Section 246(a)(3)(A)(ii) of the Trade Act must be met.

1. Whether a significant number of workers in the workers' firm are 50 years of age or older.

2. Whether the workers in the workers' firm possess skills that are not easily transferable.

3. The competitive conditions within the workers' industry (i.e., conditions within the industry are adverse).

Affirmative Determinations for Worker Adjustment Assistance

The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) of the Trade Act have been met.

None.

The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) of the Trade Act have been met.

TA-W-63,894; Unicord International, LLC, dba Columbian Rope Company, Guntown, MS: August 11, 2007.

The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) of the Trade Act have been met.

TA-W-64,053; Oakley Sub Assembly, Shreveport, LA: September 12, 2007.

The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) of the Trade Act have been met.

None.

Affirmative Determinations for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-63,757; Continental Sprayers International, Inc., A Subsidiary of Continental AFA Dispensing Co., Bridgeport, CT: July 28, 2007.

TA-W-63,935; Koret of California, A Subsidiary of Kellwood Co., Oakland, CA: August 18, 2007.

TA-W-63,965; General Motors Corporation, GMVM Division, Allegis Group Services, Oklahoma City, OK: November 1, 2008.

T A-W-64,064; Bumper Works, Subsidiary of Flex-N-Gate, Trillium, Danville, IL: September 15, 2007.

TA-W-63,780; Newell Rubbermaid, Sanford Brands Division, Maryville, TN: July 30, 2007.

TA-W-63,899; Hughes Hardwood International, Inc., Dimension Plant, Collinwood, TN: August 18, 2007. Start Printed Page 63736

TA-W-63,954; Flextronics, Formerly Known as Solectron, Technology Leadership Group, Charlotte, NC: August 27, 2007.

TA-W-63,984; Norwalk Furniture Corporation, Livingston Division, Livingston, TN: September 3, 2007.

TA-W-64,015; KAM Manufacturing, Inc., Van Wert, OH: September 9, 2007.

TA-W-64,104; Joseph Abboud Mfg. Corp, New Bedford, MA: September 22, 2007.

The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-63,946; Rayloc, A Division of Genuine Parts Company, Morganfield, KY: August 14, 2007.

TA-W-63,947; Rayloc, A Division of Genuine Parts Company, Payson, UT: August 14, 2007.

TA-W-63,950; Howmet Corporation, Whitehall, MI: August 27, 2007.

TA-W-63,975; Hubbell Power Systems, Inc., Hubbell, Inc., Anderson Div., Staffmark, Elkton,TN: August 21, 2007.

TA-W-64,006; Amphenol Corporation, Sidney, NY: August 28, 2007.

TA-W-64,057; Alba Health, LLC, Rockwood, TN: March 17, 2008

TA-W-64,077; Trelleborg YSH, Inc., A Subsidiary of Trelleborg AB, Peru, IN: September 17, 2007.

TA-W-64,079; SKF Automotive Division, A Subsidiary of SKF USA, Inc., Glasgow, KY: September 18, 2007.

TA-W-64,092; Standard Motor Products,Wire and Cable Division, Edwardsville, KS: September 19, 2007.

TA-W-64,111; Drivesol Worldwide, Inc., Kendallville, IN: September 23, 2007.

TA-W-64,155; Window Fashions, Inc., Pittsburgh, PA: October 1, 2007.

TA-W-63,955; Southco, Inc., Randstad, Concordville, PA: August 27, 2007.

TA-W-64,032; Schawk, Inc., Cincinnati 447 Division, Imaging Department, Cincinnati, OH: September 8, 2007.

TA-W-64,065; Aeiomed, Inc., Minneapolis, MN: September 16, 2007.

The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-63,876; KMC Industries,Dell Technical Group, Landmark Staffing, U.S. Tech, Denmark, WI: August 12, 2007.

TA-W-64,043; Innertech-Shreveport: Decoma International, Division of Magna International, Shreveport, LA: September 12, 2007.

TA-W-64,059; Johnson Controls, Inc., dba Hoover Universal, Shreveport, LA: August 29, 2007.

TA-W-64,109; Greystone of Lincoln, Inc., A Subsidiary of Greystone,Lincoln, RI: August 29, 2007.

The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

None.

Negative Determinations for Alternative Trade Adjustment Assistance

In the following cases, it has been determined that the requirements of 246(a)(3)(A)(ii) have not been met for the reasons specified.

The Department has determined that criterion (1) of Section 246 has not been met. The firm does not have a significant number of workers 50 years of age or older.

None.

The Department has determined that criterion (2) of Section 246 has not been met. Workers at the firm possess skills that are easily transferable.

TA-W-63,894; Unicord International, LLC, dba Columbian Rope Company, Guntown, MS.

TA-W-64,053; Oakley Sub Assembly, Shreveport, LA.

The Department has determined that criterion (3) of Section 246 has not been met. Competition conditions within the workers' industry are not adverse.

None.

Negative Determinations for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

In the following cases, the investigation revealed that the eligibility criteria for worker adjustment assistance have not been met for the reasons specified.

Because the workers of the firm are not eligible to apply for TAA, the workers cannot be certified eligible for ATAA.

The investigation revealed that criteria (a)(2)(A)(I.A.) and (a)(2)(B)(II.A.) (employment decline) have not been met.

None.

The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

TA-W-63,948; Kulp Foundry, Inc., East Stroudsburg, PA.

The investigation revealed that criteria (a)(2)(A)(I.C.) (increased imports) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

TA-W-63,701; CTS & I Millwork, Rocky Mountain, VA.

TA-W-63,904; Nestaway, LLC, Garfield Heights, OH.

TA-W-63,992; Owens-Corning Sales LLC, OCV Reinforcements Division, Anderson, SC.

TA-W-64,036; Hamilton Dental Designs, Inc., Modesto, CA.

TA-W-64,160; Boise Cascade, LLC, St. Helens, OR.

The workers' firm does not produce an article as required for certification under Section 222 of the Trade Act of 1974.

TA-W-63,934; SMI Global Corporation, Pacific Plywood Holdings Limited, Bellevue, WA.

TA-W-63,998; Jabil Global Service, Failure Analysis Department, St. Petersburg, FL.

The investigation revealed that criteria of Section 222(b)(2) has not been met. The workers' firm (or subdivision) is not a supplier to or a downstream producer for a firm whose workers were certified eligible to apply for TAA.

None.

I hereby certify that the aforementioned determinations were issued during the period of October 6 through October 10, 2008. Copies of these determinations are available for inspection in Room C-5311, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210 during normal business hours or will be mailed to persons who write to the above address.

Start Signature

Dated: October 17, 2008.

Erin Fitzgerald,

Director, Division of Trade Adjustment Assistance.

End Signature End Preamble

[FR Doc. E8-25465 Filed 10-24-08; 8:45 am]

BILLING CODE 4510-FN-P