Food and Drug Administration, HHS.
The Food and Drug Administration (FDA) is announcing an opportunity for public comment on the proposed collection of certain information by the agency. Under the Paperwork Reduction Act of 1995 (the PRA), Federal agencies are required to publish notice in the Federal Register concerning each proposed collection of information, including each proposed extension of an existing collection of information, and to allow 60 days for public comment in response to the notice. This notice solicits comments on reprocessed single-use device labeling.
Submit written or electronic comments on the collection of information by January 16, 2009.
Submit electronic comments on the collection of information to: http://www.regulations.gov. Submit written comments on the collection of information to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, rm. 1061, Rockville, MD 20852. All comments should be identified with the docket number found in brackets in the heading of this document.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Denver Presley, Jr., Office of Information Management (HFA-710), Food and Drug Administration, 5600 Fishers Lane, Rockville, MD 20857, 301-796-3793End Further Info.End Preamble Start Supplemental Information
Under the PRA (44 U.S.C. 3501-3520), Federal agencies must obtain approval from the Office of Management and Budget (OMB) for each collection of information they conduct or sponsor. “Collection of information” is defined in 44 U.S.C. 3502(3) and 5 CFR 1320.3(c) and includes agency requests or requirements that members of the public submit reports, keep records, or provide information to a third party. Section 3506(c)(2)(A) of the PRA (44 U.S.C. 3506(c)(2)(A)) requires Federal agencies to provide a 60-day notice in the Federal Register concerning each proposed collection of information, including each proposed extension of an existing collection of information, before submitting the collection to OMB for approval. To comply with this requirement, FDA is publishing notice of the proposed collection of information set forth in this document.
With respect to the following collection of information, FDA invites comments on these topics: (1) Whether the proposed collection of information is necessary for the proper performance of FDA's functions, including whether the information will have practical utility; (2) the accuracy of FDA's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; (3) ways to enhance the quality, utility, and clarity of the information to be collected; and (4) ways to minimize the burden of the collection of information on respondents, including through the use of automated collection techniques, when appropriate, and other forms of information technology.Start Printed Page 67874
Compliance With Section 301 of the Medical Device User Fee and Modernization Act of 2002, as Amended: Prominent and Conspicuous Mark of Manufacturers on Single-Use Devices (formerly “Reprocessed Single-Use Device Labeling”) (Federal Food, Drug, and Cosmetic Act, Section 502(u)) (OMB Control Number 0910-0577)—Extension
Section 502 of the Federal Food, Drug, and Cosmetic Act (the act) (21 U.S.C. 352), among other things, establishes requirements that the label or labeling of a medical device must meet so that it is not misbranded and subject to regulatory action. Section 301 of the Medical Device User Fee and Modernization Act of 2002 (Public Law 107-250) amended section 502 of the act to add section 502(u) to require devices (both new and reprocessed) to bear prominently and conspicuously the name of the manufacturer, a generally recognized abbreviation of such name, or a unique and generally recognized symbol identifying the manufacturer. Thus, the name for this information collection activity has been changed to more accurately describe the information collection content.
Section 2(c) of The Medical Device User Fee Stabilization Act of 2005 (Public Law 109-43) amends section 502(u) of the act by limiting the provision to reprocessed single-use devices (SUDs) and the manufacturers who reprocess them. Under the amended provision, if the original SUD or an attachment to it prominently and conspicuously bears the name of the manufacturer, then the reprocessor of the SUD is required to identify itself by name, abbreviation, or symbol, in a prominent and conspicuous manner on the device or attachment to the device. If the original SUD does not prominently and conspicuously bear the name of the manufacturer, the manufacturer who reprocesses the SUD for reuse may identify itself using a detachable label that is intended to be affixed to the patient record.
The requirements of section 502(u) of the act impose a minimal burden on industry. This section of the act only requires the manufacturer, packer, or distributor of a device to include their name and address on the labeling of a device. This information is readily available to the establishment and easily supplied. From its registration and premarket submission database, FDA estimates that there are 10 establishments that distribute approximately 1,000 reprocessed SUDs. Each response is anticipated to take 0.1 hours resulting in a total burden to industry of 100 hours.
FDA estimates the burden of this collection of information as follows:
|Section of the Act||No. of Respondents||No. of Responses per Respondent||Total Annual Responses||Hours Per Response||Total Hours|
|1 There are no capital costs or operating and maintenance costs associated with this collection of information.|
Please note that on January 15, 2008, the FDA Division of Dockets Management Web site transitioned to the Federal Dockets Management System (FDMS). FDMS is a Government-wide, electronic docket management system. Electronic comments or submissions will be accepted by FDA only through FDMS at http://www.regulations.gov.Start Signature
Dated: November 5, 2008.
Associate Commissioner for Policy and Planning.
[FR Doc. E8-27178 Filed 11-14-08; 8:45 am]
BILLING CODE 4160-01-S