Skip to Content

Notice

Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

In accordance with Section 223 of the Trade Act of 1974, as amended (19 U.S.C. 2273) the Department of Labor herein presents summaries of Start Printed Page 17220determinations regarding eligibility to apply for trade adjustment assistance for workers (TA-W) number and alternative trade adjustment assistance (ATAA) by (TA-W) number issued during the period of March 30 through April 3, 2009.

In order for an affirmative determination to be made for workers of a primary firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(a) of the Act must be met.

I. Section (a)(2)(A) all of the following must be satisfied:

A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially separated, or are threatened to become totally or partially separated;

B. The sales or production, or both, of such firm or subdivision have decreased absolutely; and

C. Increased imports of articles like or directly competitive with articles produced by such firm or subdivision have contributed importantly to such workers' separation or threat of separation and to the decline in sales or production of such firm or subdivision; or

II. Section (a)(2)(B) both of the following must be satisfied:

A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially separated, or are threatened to become totally or partially separated;

B. There has been a shift in production by such workers' firm or subdivision to a foreign country of articles like or directly competitive with articles which are produced by such firm or subdivision; and

C. One of the following must be satisfied:

1. The country to which the workers' firm has shifted production of the articles is a party to a free trade agreement with the United States;

2. The country to which the workers' firm has shifted production of the articles to a beneficiary country under the Andean Trade Preference Act, African Growth and Opportunity Act, or the Caribbean Basin Economic Recovery Act; or

3. There has been or is likely to be an increase in imports of articles that are like or directly competitive with articles which are or were produced by such firm or subdivision.

Also, in order for an affirmative determination to be made for secondarily affected workers of a firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(b) of the Act must be met.

(1) Significant number or proportion of the workers in the workers' firm or an appropriate subdivision of the firm have become totally or partially separated, or are threatened to become totally or partially separated;

(2) The workers' firm (or subdivision) is a supplier or downstream producer to a firm (or subdivision) that employed a group of workers who received a certification of eligibility to apply for trade adjustment assistance benefits and such supply or production is related to the article that was the basis for such certification; and

(3) Either—

(A) The workers' firm is a supplier and the component parts it supplied for the firm (or subdivision) described in paragraph (2) accounted for at least 20 percent of the production or sales of the workers' firm; or

(B) A loss or business by the workers' firm with the firm (or subdivision) described in paragraph (2) contributed importantly to the workers' separation or threat of separation.

In order for the Division of Trade Adjustment Assistance to issue a certification of eligibility to apply for Alternative Trade Adjustment Assistance (ATAA) for older workers, the group eligibility requirements of Section 246(a)(3)(A)(ii) of the Trade Act must be met.

1. Whether a significant number of workers in the workers' firm are 50 years of age or older.

2. Whether the workers in the workers' firm possess skills that are not easily transferable.

3. The competitive conditions within the workers' industry (i.e., conditions within the industry are adverse).

Affirmative Determinations for Worker Adjustment Assistance

The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) of the Trade Act have been met.

None.

The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) of the Trade Act have been met.

None.

The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) of the Trade Act have been met.

None.

The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) of the Trade Act have been met.

None.

Affirmative Determinations For Worker Adjustment Assistance And Alternative Trade Adjustment Assistance

The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-65,245; Pacific Veneer, Ilevel Division, A Subsidiary of Weyerhaeuser, Aberdeen, WA: February 9, 2008

TA-W-65,272; The Timken Company, Cairo, GA: February 12, 2008

TA-W-65,314; Kennametal, Inc., Greenfield TAP Plant, MSSG Division, Greenfield, MA: January 26, 2008

TA-W-65,393; Pieco, Inc. dba Superior Trim, Findlay, OH: February 13, 2008

TA-W-65,655; Weyerhaeuser Company, Weyerhaeuser NR Company, Level Division, Chavies, KY: March 19, 2008

TA-W-65,310; Micro Tool and Manufacturing, Inc., Meadville, PA: February 18, 2008

TA-W-65,382; Bahari Group Limited, New York, NY: February 17, 2008

The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-64,499A; Whirlpool Corporation, St. Joseph, MI: November 3, 2007

TA-W-64,499; Whirlpool Corporation, Benton Harbor, MI: November 3, 2007

TA-W-65,001; Brunswick Corporation, U.S. Marine Division, Navassa, NC: January 27, 2008

TA-W-65,230; Vishay Vitramon, Inc., Monroe, CT: March 20, 2009

TA-W-65,236; Hanesbrands, Inc., On-Site Worker from Kelly Service Temps, Barnwell, SC: February 9, 2008 Start Printed Page 17221

TA-W-65,327; Mississippi Packaging, LLC, d/b/a Shamrock Specialty, Speecer Reed Group, El Paso, TX: February 20, 2008

TA-W-65,330; KX Technology, LLC, A Subsidiary of Marmon Waters, West Haven, CT: February 20, 2008

TA-W-65,363; Nobel Automotive Tennessee, LLC, Orhan North America, Formerly Dana Corp, Paris, TN: February 23, 2008

TA-W-65,414; Toyoda Gosei Automotive Sealing Kentucky, LLC, Toyoda Gosei North America Division, Hopkinsville, KY: February 2, 2008

TA-W-65,271; ACS Cumberland Engineering, South Attleboro, MA: January 27, 2008

TA-W-65,309; ITW Paslode, Terrell, TX: February 18, 2008

TA-W-65,371; Finisar Corporation, Formerly Optium Corp., Horsham, PA: February 19, 2008

TA-W-65,381; JV China Ting, LLC, New York, NY: February 24, 2008

TA-W-65,415A; Champion Laboratories, Inc., A Subsidiary of United Components, West Salem, IL: February 26, 2008

TA-W-65,415; Champion Laboratories, Inc., A Subsidiary of United Components, Albion, IL: February 26, 2008

TA-W-65,083; HDM Furniture Industries, Inc., Furniture Offices and Design Showroom Operations, High Point, NC: February 2, 2008

The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

TA-W-65,240; St. Marys Carbon Company, St. Marys, PA: February 11, 2008

TA-W-65,279; Lenoir Mirror Company, Lenoir, NC: February 12, 2008

TA-W-65,423; Metaldyne, Litchfield, MI: January 18, 2008

TA-W-65,448; K and K Screw Products, LLC, East China, MI: February 27, 2008

TA-W-65,528; The Warren Company, Advanced Placement, Erie, PA: March 6, 2008

TA-W-65,589; AZ Automotive, Roseville, MI: March 6, 2008

The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

None.

Negative Determinations for Alternative Trade Adjustment Assistance

In the following cases, it has been determined that the requirements of 246(a)(3)(A)(ii) have not been met for the reasons specified.

The Department has determined that criterion (1) of Section 246 has not been met. The firm does not have a significant number of workers 50 years of age or older.

None.

The Department has determined that criterion (2) of Section 246 has not been met. Workers at the firm possess skills that are easily transferable.

None.

The Department has determined that criterion (3) of Section 246 has not been met. Competition conditions within the workers' industry are not adverse.

None.

Negative Determinations for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

In the following cases, the investigation revealed that the eligibility criteria for worker adjustment assistance have not been met for the reasons specified.

Because the workers of the firm are not eligible to apply for TAA, the workers cannot be certified eligible for ATAA.

The investigation revealed that criteria (a)(2)(A)(I.A.) and (a)(2)(B)(II.A.) (employment decline) have not been met.

TA-W-64,499B; Whirlpool Corporation, Benton Harbor, MI.

TA-W-65,335; Engineering Design and Sales, Inc., Danville, VA.

TA-W-65,367; Kern Liebers Textile USA, Charlotte, NC.

The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

None.

The investigation revealed that criteria (a)(2)(A)(I.C.) (increased imports) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

TA-W-64,765; Sealing Products Manufacturing, LLC, Div of Dana Holding Corp., Danville, KY.

TA-W-64,775; National Semiconductor, Interface and Hi-Rel Design, South Portland, ME.

TA-W-64,963; DME Manufacturing, Inc., Youngwood, PA.

TA-W-65,008; Modern Industries, Inc., Machining Division, Erie, PA.

TA-W-65,094; Plastic Packaging, Inc., Aberdeen, NC.

TA-W-65,224; Panel Products, LLC, Rogue River, OR.

TA-W-65,261; Dunbar Enterprises, Inc., Snohomish, WA.

TA-W-65,509; Moose River Lumber Company, Inc., Moose River, ME.

The workers' firm does not produce an article as required for certification under Section 222 of the Trade Act of 1974.

TA-W-65,241; Chase Home Finance LLC, A Division of JP Morgan Chase and Company, Lexington, KY.

TA-W-65,288; Caliber Auto Transfer of Detroit, Wayne, MI.

TA-W-65,412; Bestway Express, Inc., Vincennes, IN.

The investigation revealed that criteria of Section 222(b)(2) has not been met. The workers' firm (or subdivision) is not a supplier to or a downstream producer for a firm whose workers were certified eligible to apply for TAA.

None

I hereby certify that the aforementioned determinations were issued during the period of March 30 through April 3, 2009. Copies of these determinations are available for inspection in Room N-5428, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210 during normal business hours or will be mailed to persons who write to the above address.

Start Signature

Dated: April 8, 2009.

Linda G. Poole,

Certifying Officer, Division of Trade Adjustment Assistance

End Signature.End Preamble

[FR Doc. E9-8404 Filed 4-13-09; 8:45 am]

BILLING CODE 4510-FN-P