This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden conducts a pre-clearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed and/or continuing collections of information in accordance with the Paperwork Reduction Act of 1995 (PRA95) [44 U.S.C. 3506(c)(c)(A)]. This program helps to ensure that requested data can be provided in the desired format, reporting burden (time and financial resources) is minimized, collection instruments are clearly understood, and the impact of collection requirements on respondents can be properly assessed.
Currently, the Mine Safety and Health Administration (MSHA) is soliciting comments concerning the extension of the information collection related to the 30 CFR Sections 70.209, 71.209, and 90.209—Mine Operator Dust Data Card; 70.201(c), 71.201(c), 90.201(c)—Reporting Operator Sampling Dates; 70.202(b), 71.202(b), and 90.202(b)—Dust Sampling Certification; 70.220(a), 71.220(a), and 90.220(a)—Reporting Status Changes; and 71.300, 71.301(d), 90.300, and 90.301(d)—Respirable Dust Control Plan.
Submit comments on or before June 29, 2009.
Send comments to, Debbie Ferraro, Management Services Division, 1100 Wilson Boulevard, Room 2141, Arlington, VA 22209-3939. Commenters are encouraged to send their comments on computer disk, or via e-mail to Ferraro.Debbie@DOL.GOV. Ms. Ferraro can be reached at (202) 693-9821 (voice), or (202) 693-9801 (facsimile). Because of potential delays in receipt and processing of mail, respondents are strongly encouraged to submit comments electronically to ensure timely receipt. We cannot guarantee that comments mailed will be received before the comment closing date.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Contact the employee listed in the ADDRESSES section of this notice.End Further Info End Preamble Start Supplemental Information
30 CFR 70.201(c), 71.201(c), and 90.201(c), authorize the District Manager to require the mine operator to submit the dates(s) when sampling will begin. Only a certified person is allowed to conduct the respirable dust sampling required by these parts.
§§ 70.202(b), 71.202(b), and 90.202(b), require that the person must pass the MSHA examination on sampling of respirable coal mine dust.
§§ 70.220(a), 71.220(a), and 90.220(a), require the operator to report status changes to MSHA in writing within 3 working days after the status change has occurred.
§§ 70.209, 71.209, and 90.209, require persons who are certified by MSHA to take respirable dust samples to complete the dust data card that accompanies each sample being submitted for analysis.
§§ 71.300 and 90.300 require a coal mine operator to submit to MSHA for approval a written respirable dust control plan within 15 calendar days after the termination date of a citation for violation of the applicable dust standard.
§ 71.301(d) requires the respirable dust control plan to be posted on the mine bulletin board, however, 90.301(d) prohibits posting of the dust control plan for P-90 miners and, instead, requires a copy be provided to the affected P-90 miner.
II. Desired Focus of Comments
MSHA is particularly interested in comments that:
- Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility;Start Printed Page 19989
- Evaluate the accuracy of the agency's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used;
- Enhance the quality, utility, and clarity of the information to be collected; and
- Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submissions of responses.
A copy of the proposed information collection request can be obtained by contacting the employee listed in the FOR FURTHER INFORMATION CONTACT section of this notice, or viewed on the Internet by accessing the MSHA home page (http://www.msha.gov/) and selecting “Rules & Regs”, and then selecting “FedReg. Docs”. On the next screen, select “Paperwork Reduction Act Supporting Statement” to view documents supporting the Federal Register Notice.
III. Current Actions
The information provided by the mine operator on the dust data card that accompanies each dust sample, the reporting of when such samples will be collected to allow MSHA to observe the actual collection, and the reporting of any changes in operation status affecting sampling, are vital to effectively administer the operator sampling program. This allows MSHA to determine not only whether mine operators have complied with the sampling requirements stipulated in the regulations but also which operators were in noncompliance with the applicable dust standard. After processing, results are reported back to mine operators for posting on the mine bulletin board and viewing by miners. MSHA also uses this information to plan enforcement activities and evaluate programs.
Type of Review: Extension.
Agency: Mine Safety and Health Administration.
Title: Mine Operator Dust Cards.
OMB Number: 1219-0011.
Frequency: On occasion.
Affected Public: Business or other for-profit.
Burden Hours: 33,199.
Total Burden Cost: $2,989,000.
Comments submitted in response to this notice will be summarized and/or included in the request for Office of Management and Budget approval of the information collection request; they will also become a matter of public record.Start Signature
Dated at Arlington, Virginia, this 24th day of April 2009.
Director of Management Services Division.
[FR Doc. E9-9943 Filed 4-29-09; 8:45 am]
BILLING CODE 4510-43-P