Federal Communications Commission.
Final rule; correction.
The Federal Communications Commission is correcting a final rule that appeared in the Federal Register of May 21, 2009, 74 FR 23799. The document issued a measurement procedure for the maximum conducted output power of radio equipment used in the 4.9 GHz frequency band.
Effective June 22, 2009.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Thomas Eng, Policy Division, Public Safety and Homeland Bureau, Federal Communications Commission, Washington, DC 20554, at (202) 418-0019, TTY (202) 418-7233, via e-mail at Thomas.Eng@fcc.gov, or via U.S. Mail at Federal Communications Commission, Public Safety and Homeland Security Bureau, 445 12th Street, SW., Washington, DC 20554.End Further Info End Preamble Start Supplemental Information
The Federal Communications Commission published a document in the Federal Register on May 21, 2009, 74 FR 23799, inadvertently omitting the words “using instrumentation.” This correction is necessary for clarification. In rule FR Doc. E9-11908 published May 21, 2009, 74 FR 23799 make the following correction:
On page 23803, in the third column, in § 90.1215 Power Limits, in paragraph (c), the first sentence, “The maximum conducted output power is measured as a conducted emission over any interval of continuous transmission calibrated in terms of an RMS-equivalent voltage.” is corrected to read “The maximum conducted output power is measured as a conducted emission over any interval of continuous transmission using instrumentation calibrated in terms of an RMS-equivalent voltage.”End Amendment Part Start Signature
Marlene H. Dortch,
[FR Doc. E9-13665 Filed 6-9-09; 8:45 am]
BILLING CODE 6712-01-P