Skip to Content


Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment Assistance

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble


Economic Development Administration, Department of Commerce.


Notice and opportunity for public comment.

Pursuant to Section 251 of the Trade Act of 1974 (19 U.S.C. 2341 et seq.), the Economic Development Administration (EDA) has received petitions for certification of eligibility to apply for Trade Adjustment Assistance from the firms listed below. EDA has initiated separate investigations to determine whether increased imports into the United States of articles like or directly competitive with those produced by each firm contributed importantly to the total or partial separation of the firm's workers, or threat thereof, and to a decrease in sales or production of each petitioning firm.Start Printed Page 28912

List of Petitions Received by EDA for Certification of Eligibility To Apply for Trade Adjustment

[5/18/2009 through 6/10/2009]

FirmAddressDate accepted for filingProducts
Promark International, Inc1268 Humbracht Circle, Bartlett, IL 60103-16315/20/2009Professional photographic and video lighting equipment and accessories.
Ultra Tool & Manufacturing, IncW169 N5954 Ridgewood, Menominee, WI 30515/19/2009Metal stampings and tooling for precision metal stamping applications.
Accent Windows, Inc12300 Pecos St., Westminster, CO 802345/19/2009Windows and doors are custom designed and manufactured from vinyl, wood, metal, and glass on-site.
Black Gold International, LLC2280 SW 70th Avenue, Davie, FL 333175/20/2009Men's formal wear accessories, principal materials include fabric, woven yarns, and buttons.
Martin Door Manufacturing2828 S 900 W, Salt Lake, UT 841195/20/2009Steel garage doors and related products.
Swanson Group Manufacturing, LLC2695 Glendale Valley Road, Glendale, OR 97442-97155/20/2009Plywood/veneer and dimensional lumber.
Rochester Shoe Tree Company, IncOne Cedar Lane, Ashland, NH 032175/21/2009Aromatic red cedar shoe trees, shoe care products, red cedar gifts and display trees.
H&J Investments dba Custom Engineering8558 Miramar Place, San Diego, CA 921215/21/2009Plastic injection molding of short to medium run production parts, and specialization in hybrid aluminum molds used for injection molding.
Wendell August Forge, Inc620 Madison Avenue, PO, Grove City, PA 161275/21/2009Hand-wrought ornamental ironware and aluminum and pewter giftware.
Columbia Gem House, Inc12507 NE 95th Street, Vancouver, WA 986825/22/2009Silver and gold jewelry with cut gemstones of many varieties.
Tracy Glover Objects and Lighting, Inc1655 Elmwood Ave., Cranston, RI 029105/19/2009Tracy Glover Objects and Lighting, Inc. manufactures and sells hand-blown glass lighting fixtures, objects and furniture hardware.
Ricardo E. Gomez, Inc. dba Professional770 Market Avenue, Richmond, CA 94801-13035/31/2009A wide range of interior and exterior finishes to individual customer specifications. Sandblasting, silkscreening, liquid or powder coating in a wide range of materials, inspection, packing and shipping.
WITCO, Inc.6401 Bricker Road, Avoca, MI 480066/3/2009Machined components with and without threads.
International Packaging Corporation517 Mineral Spring Avenue, Pawtucket, RI 028605/19/2009Jewelry boxes which range in style from covered metal boxes to plastic and cardboard boxes, along with hanging cards and jewelry pads. They also manufacture point-of-purchase displays made from wood and plexi-glass. Jewelry accessory products range from puff pads that hold jewelry to sewn and heat seal products.
Mid-West Screw Products, Inc3523 N. Kenton Ave., Chicago, IL 606415/22/2009Machined metal high and low voltage connectors, mechanical fasteners, screws and turned metal parts.
Ripano Stoneworks Ltd90 East Hollis Street, Nashua, NH 030605/22/2009Custom stone slab work including: kitchen counters, bathroom vanities, shower walls, tub surrounds, fireplaces, reception desks and furniture tops.
Silbond Corporation9901 Sand Creek Hwy., Weston, MI 492895/22/2009Chemical additives for coatings to provide adhesive properties and other industrial inorganic chemicals.
Advanced Energy Industries, Inc1625 Sharp Point Drive, Fort Collins, CO 805255/27/2009Electrical power, gas and liquid flow management systems for solar cell, semiconductor and other processes.
Annex Precision800 Mathew Street, Suite, Santa Clara, CA 950505/29/2009High precision parts manufactured from various materials including all types of plastics, steels, aluminum, copper, and brass.
Aero Parts Manufacturing & Repair, Inc431 Rio Rancho Boulevard, Rio Rancho, NM 817246/3/2009Airplane parts for commercial and military aircraft, and provides service and repair on airplane parts.
Skol Manufacturing Company4444 N. Ravenswood Ave., Chicago, IL 606405/29/2009Precision stamped, formed and welded parts and assemblies.
Body Balance System, LLC3834 Commerce Loop, Orlando, FL 32808-38185/18/2009Ionic detoxification foot bath systems, sound therapy systems, and blood therapy systems.
ABBA Plastics, Inc.207 Beaver Street, Yorkville, IL 606505/31/2009Custom plastic parts.

Any party having a substantial interest in these proceedings may request a public hearing on the matter. A written request for a hearing must be submitted to the Office of Performance Evaluation, Room 7009, Economic Development Administration, U.S. Department of Commerce, Washington, DC 20230, no later than ten (10) calendar days following publication of this notice. Please follow the procedures set forth in Section 315.9 of EDA's final rule (71 FR 56704) for procedures for requesting a public hearing. The Catalog of Federal Domestic Assistance official program number and title of the program under which these petitions are submitted is 11.313, Trade Adjustment Assistance.

Start Signature

Dated: June 9, 2009.

William P. Kittredge,

Program Officer for TAA.

End Signature End Preamble

[FR Doc. E9-14316 Filed 6-17-09; 8:45 am]