The Committee for the Implementation of Textile Agreements.
Determination to add a product in unrestricted quantities to Annex 3.25 of the CAFTA-DR Agreement
Effective Date: September 21, 2009.
The Committee for the Implementation of Textile Agreements (“CITA”) has determined that certain cotton/nylon/spandex raschel knit open work crepe fabric, as specified below, is not available in commercial quantities in a timely manner in the CAFTA-DR countries. The product will be added to the list in Annex 3.25 of the CAFTA-DR Agreement in unrestricted quantities.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Maria Dybczak, Office of Textiles and Apparel, U.S. Department of Commerce, (202) 482-3651.
FOR FURTHER INFORMATION ON-LINE: http://web.ita.doc.gov/tacgi/CaftaReqTrack.nsf under “Approved Requests,” Reference number: 130.2009.08.21.Fabric.ST&Rfor HansaeEnd Further Info End Preamble Start Supplemental Information
The CAFTA-DR Agreement provides a list in Annex 3.25 for fabrics, yarns, and fibers that the Parties to the CAFTA-DR Agreement have determined are not available in commercial quantities in a timely manner in the territory of any Party. The CAFTA-DR Agreement provides that this list may be modified pursuant to Article 3.25(4)-(5), when the President of the United States determines that a fabric, yarn, or fiber is not available in commercial quantities in a timely manner in the territory of any Party. See Annex 3.25 of the CAFTA-DR Agreement; see also Section 203(o)(4)(C) of the CAFTA-DR Implementation Act.
The CAFTA-DR Implementation Act requires the President to establish procedures governing the submission of a request and providing opportunity for interested entities to submit comments and supporting evidence before a commercial availability determination is made. In Presidential Proclamations 7987 and 7996, the President delegated to CITA the authority under section 203(o)(4) of CAFTA-DR Implementation Act for modifying the Annex 3.25 list. Pursuant to this authority, on September 15, 2008, CITA published modified procedures it would follow in considering requests to modify the Annex 3.25 list of products determined to be not commercially available in the territory of any Party to CAFTA-DR. See CITA's procedures.
On August 21, 2009, the Chairman of CITA received a Request for a Commercial Availability Determination (“Request”) from Sandler, Travis & Rosenberg, P.A., on behalf of Hansae Co. Ltd., for certain cotton/nylon/spandex raschel knit open work crepe fabric, as specified below. On August 24, 2009, in accordance with CITA's procedures, CITA notified interested parties of the Request, which was posted on the dedicated website for CAFTA-DR Commercial Availability proceedings. In its notification, CITA advised that any Response with an Offer to Supply (“Response”) must be submitted by September 4, 2009, and any Rebuttal Comments to a Response must be submitted by September 11, 2009, in accordance with Sections 6 and 7 of CITA's procedures. No interested entity submitted a Response to the Request advising CITA of an objection to the Request and an ability to supply the subject product.
In accordance with Section 203(o)(4)(C) of the CAFTA-DR Implementation Act, and Section 8(c)(2) of CITA's procedures, as no interested entity submitted a Response objecting to the Request and demonstrating its ability to supply the subject product, CITA has determined to add the specified fabric to the list in Annex 3.25 of the CAFTA-DR Agreement.
Therefore, the subject product has been added to the list in Annex 3.25 of the CAFTA-DR Agreement in unrestricted quantities. A revised list has been posted on the dedicated website for CAFTA-DR Commercial Availability proceedings.Start Printed Page 48055
|Specifications: Certain Cotton/Nylon/Spandex Raschel Knit Open Work Crepe Fabric|
|HTSUS: 6005.22.00, 6005.24.00|
|Fabric type: Raschel knit, open work crepe fabric|
|Fiber content: 59-63% cotton, 33-36% nylon, wrapped with 3-5% spandex|
|English: 57/2 to 63/2|
|Metric: 96/2 to 107/2|
|English: 38 to 42 denier/24 filament or 66 to 74 denier / 2|
|Metric: 38 to 62 denier/24 filament or 121.50 to 136.50 / 2|
|Spandex (wrapped around Nylon):|
|Spandex—English: 199.5 to 220.5 denier; Metric: 40.85 to 45.15;|
|Nylon— English: 66-74 denier/2; Metric: 121.50 to 136.5/2)|
|Machine gauge: 18|
|Number of bars: 34|
|Weight: 110 to 140 grams per sq. meter|
|Width: 127 to 152 centimeters|
|Finishing Process: Piece dyed or printed|
Chairman, Committee for the Implementation of Textile Agreements.
[FR Doc. E9-22672 Filed 9-18-09; 8:45 am]
BILLING CODE 3510-DS