Import Administration, International Trade Administration, Department of Commerce.
On September 8, 2009, the Department of Commerce (the Department) published the preliminary results of the antidumping duty administrative review for certain corrosion-resistant carbon steel flat products (CORE) from the Republic of Korea (Korea). See Certain Corrosion-Resistant Carbon Steel Flat Products from the Republic of Korea: Notice of Preliminary Results of the Antidumping Duty Administrative Review, 74 FR 46110 (September 8, 2009) (Preliminary Results). This review covers seven manufacturers and exporters (collectively, the respondents) of the subject merchandise: LG Chem., Ltd. (LG Chem), Haewon MSC Co. Ltd. (Haewon), Dongbu Steel Co., Ltd., (Dongbu), Hyundai HYSCO (HYSCO), Pohang Iron & Steel Co., Ltd. (POSCO) and Pohang Coated Steel Co., Ltd. (POCOS) (collectively, the POSCO Group), and Union Steel Manufacturing Co., Ltd. (Union) (collectively, respondents).1 The period of review (POR) is August 1, 2007, through July 31, 2008.
As a result of our analysis of the comments received, these final results differ from the Preliminary Results. For our final results, we find that HYSCO, the POSCO Group, and Union, made sales of subject merchandise at less than normal value (NV). In addition, based on the final results for the respondents selected for individual review, we have determined a weighted-average margin for those companies that were not selected for individual review.
March 22, 2010.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Dennis McClure (Union), Christopher Hargett (HYSCO) and Victoria Cho (the POSCO Group, and non-selected companies), AD/CVD Operations, Office 3, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-5973, Start Printed Page 13491(202) 482-4161, and (202) 482-5075, respectively.End Further Info End Preamble Start Supplemental Information
On September 8, 2009, the Department published the Preliminary Results. In the Preliminary Results, the Department determined that HYSCO, the POSCO Group, and Union made sales of subject merchandise at less than NV during the POR. In addition, based on the preliminary results for the respondents selected for individual review, the Department calculated a weighted-average margin for those companies that were not selected for individual review. On November 16, 2009, the Department extended the time limits for the final results of this review until no later than March 8, 2010. See Corrosion-Resistant Carbon Steel Flat Products from the Republic of Korea: Notice of Extension of Time Limit for the Final Results of Antidumping Duty Administrative Review, 74 FR 58945 (November 16, 2009).
Comments from Interested Parties
We invited parties to comment on our Preliminary Results. On January 20, 2010, United States Steel Corporation (US Steel) filed its case briefs concerning all three mandatory respondents. On the same day, the three mandatory respondents filed case briefs. On January 27, 2010, US Steel, and Nucor Corporation (Nucor) filed rebuttal briefs concerning all of the mandatory respondents. The three mandatory respondents filed rebuttal briefs on the same day. The Department conducted a public hearing on January 28, 2010.
Scope of the Order
This order covers cold-rolled (cold-reduced) carbon steel flat-rolled carbon steel products, of rectangular shape, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished or coated with plastics or other nonmetallic substances in addition to the metallic coating, in coils (whether or not in successively superimposed layers) and of a width of 0.5 inch or greater, or in straight lengths which, if of a thickness less than 4.75 millimeters, are of a width of 0.5 inch or greater and which measures at least 10 times the thickness or if of a thickness of 4.75 millimeters or more are of a width which exceeds 150 millimeters and measures at least twice the thickness, as currently classifiable in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0090, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.1000, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7212.60.0000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090. Included in this order are corrosion-resistant flat-rolled products of non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been “worked after rolling”) - for example, products which have been beveled or rounded at the edges. Excluded from this order are flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead (terne plate), or both chromium and chromium oxides (tin-free steel), whether or not painted, varnished or coated with plastics or other nonmetallic substances in addition to the metallic coating. Also excluded from this order are clad products in straight lengths of 0.1875 inch or more in composite thickness and of a width which exceeds 150 millimeters and measures at least twice the thickness. Also excluded from this order are certain clad stainless flat-rolled products, which are three-layered corrosion-resistant carbon steel flat-rolled products less than 4.75 millimeters in composite thickness that consist of a carbon steel flat-rolled product clad on both sides with stainless steel in a 20%%-60%%-20%% ratio.
These HTSUS item numbers are provided for convenience and customs purposes. The written descriptions remain dispositive.
Analysis of Comments Received
All issues raised in the case and rebuttal briefs by parties to this administrative review are addressed in the accompanying Issues and Decision Memorandum, which is hereby adopted by this notice. A list of the issues which parties have raised, and to which we have responded in the Issues and Decision Memorandum, is attached to this notice as an Appendix. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly on the Internet at http://ia.ita.doc.gov/frn. The paper copy and electronic version of the Issues and Decision Memorandum are identical in content.
Final Results of Review:
We determine that the following weighted-average margins exist:
|The POSCO Group||0.01%% (de minimis)|
|Review-Specific Average Rate Applicable to the Following Companies2:LG Chem, Haewon, and Dongbu||8.65%%|
|2 This rate is a simple average percentage margin (based on the two reviewed companies with an affirmative deposit rate) for the period August 1, 2007, through July 31, 2008, and normally does not include zero and de minimis rates or any rates based solely on the facts available.|
The Department will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries, pursuant to 19 CFR 351.212(b). The Department calculated importer-specific duty assessment rates on the basis of the ratio of the total antidumping duties calculated for the examined sales to the total entered value of the examined sales for that importer. Where the assessment rate is above de minimis, we will instruct CBP to assess duties on all entries of subject merchandise by that importer. The Department intends to issue appropriate assessment instructions directly to CBP 15 days after publication of these final results of review.
The Department clarified its “automatic assessment'” regulation on May 6, 2003 (68 FR 23954). This clarification applies to POR entries of subject merchandise produced by companies examined in this review (i.e., companies for which a dumping margin was calculated) where the companies Start Printed Page 13492did not know that their merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. For a full discussion of this clarification, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003).
Cash Deposit Requirements
The following deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of CORE from Korea entered, or withdrawn from warehouse, for consumption on or after the publication date of these final results, as provided by section 751(a) of the Tariff Act of 1930, as amended (the Act): (1) for companies covered by this review, the cash deposit rate will be the rate listed above; (2) for previously reviewed or investigated companies other than those covered by this review, the cash deposit rate will be the company-specific rate established for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the less-than-fair-value investigation, but the producer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the subject merchandise; and (4) if neither the exporter nor the producer is a firm covered in this review, a prior review, or the investigation, the cash deposit rate will be 17.70 percent, the all-others rate established in the less-than-fair-value investigation. These deposit requirements shall remain in effect until further notice.
Reimbursement of Duties
This notice also serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping and/or countervailing duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the presumption that reimbursement of antidumping and/or countervailing duties occurred and the subsequent increase in antidumping duties by the amount of antidumping and/or countervailing duties reimbursed.
Administrative Protective Order
This notice also is the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
We are issuing and publishing these results and notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act.Start Signature
Dated: March 15, 2010.
Acting Deputy Assistant Secretary for Import Administration.
List of Comments in the Accompanying Issues and Decision Memorandum:
A. General Issues
Comment 1: Treatment of “Negative Dumping Margins” (Zeroing)
Comment 2: Comment 2:Home Market Revenue for the POSCO Group (Freight and Interest) and HYSCO (Interest)
Comment 3: Use of Quarterly Cost Methodology
Comment 4: Laminated Products
B. Company-Specific Issues
Comment 5: Date of Sale
Comment 6: Liquidations Instructions
Comment 7: Major Input Adjustments
The POSCO Group
Comment 8: Inadvertent Omission of Certain U.S. Sales from POSCO's Margin Calculations in the Post-Preliminary Analysis
Comment 9: The Treatment of Certain SAS Programming for the POSCO Group
Comment 10: The Department's Calculation of POCOS' Loans in the Calculation of the Home Market Interest Rate
Comment 11: The Department's Calculation of POSCO America Corporation (POSAM)'s Indirect Selling Expense
Comment 12: Financial Expense Ratio Calculation
Comment 13: Margin Calculation Error for Applying General and Administrative Expense Ratio Union
Comment 14: Window Period Sales
Comment 15: The Treatment of Overrun
Comment 16: Union's General and Administrative and Financial Expense RatiosEnd Supplemental Information
1. As noted in the Preliminary Results, the Department selected HYSCO and Union as mandatory respondents in this review. See Memorandum from Christopher Hargett, International Trade Compliance Analyst, through James Terpstra, Program Manager, to Melissa Skinner, Director, Office 3, entitled “2007-2008 Antidumping Duty Administrative Review of Corrosion-Resistant Carbon Steel Flat Products from the Republic of Korea: Selection of Respondents for Individual Review,” dated December 8, 2008. On July 8, 2009, we reconsidered our resources and found it practicable to review the POSCO Group as a voluntary respondent. See Memorandum from James Terpstra to Melissa Skinner entitled “2007-2008 Antidumping Duty Administrative Review of Certain Corrosion-Resistant Carbon Steel Flat Products from the Republic of Korea: Selection of POSCO as a Voluntary Respondent,” dated July 8, 2009.Back to Citation
[FR Doc. 2010-6258 Filed 3-19-04; 8:45 am]
BILLING CODE 3510-DS-S