Skip to Content

Notice

Fourteenth Plenary Meeting, RTCA Special Committee 205/EUROCAE WG 71: Software Considerations in Aeronautical Systems

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Notice of RTCA Special Committee 205/EUROCAE WG 71: Software Considerations in Aeronautical Systems meeting.

SUMMARY:

The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 205/EUROCAE WG 71: Software Considerations in Aeronautical Systems.

DATES:

The meeting will be held June 21-June 25, 2010.

ADDRESSES:

The meeting will be held at Ecole Centrale Marseille, Pôle de l'Etoile, Technopôle de Château-Gombert, 38, rue Frédéric Joliot-Curie, 13451 MARSEILLE Cedex 20.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

RTCA Secretariat, 1828 L Street, NW, Suite 805, Washington, DC, 20036; telephone (202) 833-9339; fax (202) 833-9434; Web site http://www.rtca.org.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Pursuant to section 10(a) (2) of the Federal Advisory Committee Act (Pub. L. 92-463, 5 U.S.C., Appendix 2), notice is hereby given for a Special Committee 205: EUROCAE WG 71: Software Considerations in Aeronautical Systems meeting. The agenda will include:

Day 1—Monday June 21, 2010

  • 8:30 a.m.—Registration
  • 9 a.m.—Chair's Introductory Remarks
  • 9:10 a.m.—Facilities Review
  • 9:15 a.m.—Recognition of the FAA Federal and EASA Representatives
  • 9:20 a.m.—Review of Meeting Agenda and Agreement of Previous Minutes
  • 9:30 a.m.—Host Presentation
  • 9:45 a.m.—Reports of Sub-Group Activity
  • 10 a.m.—Other Committee/Other Documents Interfacing Personnel Reports (CAST, Unmanned Aircraft Systems, Security, WG-63/SAE S-18)
  • 10:20 a.m.—Break
  • 10:45 a.m.—Sub-Group Break Out Sessions
  • 10:45 a.m.—New Member Introduction Session

All new committee members are invited to attend an introduction session to explain the operation of the committee, the various sub-groups and the topics they are dealing with and the web site.

  • 12 p.m.—Lunch
  • 1:15 p.m.—Sub-Group Break Out Sessions
  • 1:15 p.m.—CAST Meeting
  • 3 p.m.—Break
  • 3:15 p.m.—Plenary Session: Text Acceptance (for papers posted, commented on and reworked prior to Plenary)
  • 5 p.m.—Close of Day
  • 5-6 p.m.—Executive Committee and SG Chairs/Secretaries Meeting

Day 2—Tuesday, June 22, 2010

  • 8:30 a.m.—Sub-Group Break Out Sessions
  • 10 a.m.—Break
  • 10:30 a.m.—Sub-Group Break Out Sessions
  • 12:30 p.m.—Milestone: IP submittals due for Wednesday Plenary
  • 12:30 p.m.—Lunch
  • 1:30 p.m.—Sub-Group Break Out Sessions
  • 14:45 p.m.—Break
  • 3 p.m.—Mandatory Paper Reading Session
  • 5 p.m.—Close
  • 5 p.m.—Executive Committee and SG Chairs/Secretaries MeetingStart Printed Page 26321

Day 3—Wednesday, June 23, 2010

  • 08:30 a.m.—IP Comment Reply & Sub-Group Break Out Sessions (focused on finalizing any changes to papers being presented later in the morning)
  • 10 a.m.—Break
  • 10:30 a.m.—Plenary Text Acceptance (for papers posted, commented on and reworked prior to Plenary)
  • 12:30 p.m.—Lunch
  • 1:30 p.m.—Sub-Group Break Out Sessions
  • 1:30 p.m.—CAST Meeting (to 17:00)
  • 2:45 p.m.—Break
  • 3 p.m.—Sub-Group Break Out Sessions
  • 5 p.m.—Close
  • Evening—Social Event

Day 4—Thursday, June 24, 2010

  • 8:30 a.m.—Sub-Group Break Out Sessions
  • 10 a.m.—Break
  • 10:30 a.m.—Sub-Group Break Out Sessions
  • 12:30 p.m.—Milestone: IP submittals due for Friday Plenary
  • 12:30 p.m.—Lunch
  • 1:30 p.m.—Plenary Session
  • 2:45 p.m.—Break
  • 3 p.m.—Mandatory Paper Reading Session
  • 5 p.m.—Close
  • 5 p.m.—Executive Committee and SG Chairs/Secretaries Meeting

Day 5—Friday, June 25, 2010

  • 8 a.m.—IP Comment Reply & Sub-Group Break Out Sessions (focused on finalizing any changes to papers being presented during the morning)
  • 9:30 a.m.—Break
  • 10 a.m.—Plenary Text Approval (reworked and late posted papers—with late posted papers only being accepted if (a) the changes are very minor in nature, and (b) adequate time has been allowed for the review of the papers).
  • 12 p.m.—SG1: SCWG Document Integration Sub-Group Report
  • 12:05 p.m.—SG2: Issue & Rationale Sub-Group Report
  • 12:10 p.m.—SG3: Tool Qualification Sub-Group Report
  • 12:15 p.m.—SG4: Model Based Design & Verification Sub-Group Report
  • 12:20 p.m.—SG5: Object Oriented Technology Sub-Group Report
  • 12:25 p.m.—SG6: Formal Methods Sub-Group Report
  • 12:30 p.m.—SG7: Special Considerations Sub-Group Report
  • 12:35 p.m.—Next Meeting Information
  • 12:40 p.m.—Any Other Business, Closing Remarks & Meeting Adjourned
  • 12:45 p.m.—Meeting Evaluation (Round Robin)

Attendance is open to the interested public but limited to space availability. With the approval of the chairmen, members of the public may present oral statements at the meeting. Persons wishing to present statements or obtain information should contact the person listed in the “FOR FURTHER INFORMATION CONTACT” section. Members of the public may present a written statement to the committee at any time.

Start Signature

Issued in Washington, DC, on May 5, 2010.

Francisco Estrada C.,

RTCA Advisory Committee.

End Signature End Supplemental Information

[FR Doc. 2010-11217 Filed 5-10-10; 8:45 am]

BILLING CODE 4910-13-P