Import Administration, International Trade Administration, Department of Commerce.
On June 10, 2010, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on circular welded carbon steel pipes and tubes from Taiwan. See Preliminary Results of Antidumping Duty Administrative Review: Circular Welded Carbon Steel Start Printed Page 62367Pipes and Tubes From Taiwan, 75 FR 32911 (June 10, 2010) (Preliminary Results). This review covers one company, Yieh Phui Enterprise Co., Ltd. (Yieh Phui). Based on our analysis of the comments received, we have made no changes from the Preliminary Results. We have listed the final dumping margin below in the section entitled “Final Results of Review.”
Effective Date: October 8, 2010.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Steve Bezirganian or Robert James, AD/CVD Operations, Office 7, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-1131 and (202) 482-0649, respectively.End Further Info End Preamble Start Supplemental Information
On June 10, 2010, the Department published in the Federal Register the preliminary results of the administrative review of the antidumping duty order on circular welded carbon steel pipes and tubes from Taiwan for the period May 1, 2008, to April 30, 2009. See Preliminary Results. In response to the Department's invitation to comment on the preliminary results of this review, respondent Yieh Phui filed its case brief on July 12, 2010. Domestic producer Allied Tube & Conduit Corporation filed its rebuttal brief on July 16, 2010. No parties requested a hearing.
The deadline for the final results of this administrative review is October 8, 2010.
Scope of the Order
The merchandise covered by this order is certain circular welded carbon steel pipes and tubes from Taiwan, which are defined as: Welded carbon steel pipes and tubes, of circular cross section, with walls not thinner than 0.065 inch, and 0.375 inch or more but not over 4.5 inches in outside diameter, currently classified under Harmonized Tariff Schedule of the United States (HTSUS) item numbers 7306.30.5025, 7306.30.5032, 7306.30.5040, and 7306.30.5055. Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the merchandise subject to this order is dispositive.
Cost of Production
As discussed in the Preliminary Results, we found that Yieh Phui made home market sales of the foreign like product during the POR at prices below its costs of production (COP) within the meaning of section 773(b) of the Act. See Preliminary Results, 75 FR at 32913. Those results apply to these final results, given that no changes have been made from the calculations made in the Preliminary Results.
We found 20 percent or more of the respondent's sales of a given product during the reporting period were at prices less than the weighted-average COP for this period. Thus, we determined that these below-cost sales were made in “substantial quantities” within an extended period of time and at prices which did not permit the recovery of all costs within a reasonable period of time in the normal course of trade. See sections 773(b)(1)&(2) of the Act.
Therefore, for purposes of these final results, we continue to find that Yieh Phui made below-cost sales not in the ordinary course of trade. Consequently, we disregarded these sales for Yieh Phui and used the remaining sales as the basis for determining NV pursuant to section 773(b)(1) of the Act. For those U.S. sales of subject merchandise for which there were no matches to home market sales in the ordinary course of trade, we compared export prices to constructed value in accordance with section 773(a)(4) of the Act. See Preliminary Results, 75 FR 32913.
Analysis of Comments Received
All issues raised in the case and rebuttal briefs by interested parties in this administrative review are addressed in the Issues and Decision Memorandum (Decision Memorandum) from Susan H. Kuhbach, Acting Deputy Assistant Secretary for Import Administration, to Ronald K. Lorentzen, Deputy Assistant Secretary for Import Administration, dated September 30, 2010, which is hereby adopted by this notice. A list of the two issues which parties raised and to which we have responded, all of which are in the Decision Memorandum, is attached to this notice as an appendix. Parties can find a discussion of all issues raised in this review and the corresponding recommendations in this public memorandum, which is on file in the Central Records Unit in room 7046 of the main Department building. In addition, a complete version of the Decision Memorandum can be accessed directly via the Internet at http://ia.ita.doc.gov/frn/index.html. The paper copy and electronic version of the Decision Memorandum are identical in content.
Changes Since the Preliminary Results
Based on our analysis of the comments received, we have made no changes in the margin calculations.
Final Results of Review
We determine the following percentage margin exists for the period May 1, 2008 through April 30, 2009:
|Manufacturer/exporter||Weighted-average margin (percentage)|
|Yieh Phui Enterprise Co., Ltd||5.04|
Pursuant to 19 CFR 351.212(b), the Department has calculated an assessment rate on all appropriate entries. The Department intends to issue appropriate appraisement instructions for the company subject to this review directly to CBP 15 days after the date of publication of the final results of this review.
Because Yieh Phui did not report the entered value of its sales, we calculated importer-specific (or customer-specific) per-unit duty assessment rates by aggregating the total amount of antidumping duties calculated for the examined sales of each importer (or customer) and dividing each of these amounts by the respective quantities (by weight) associated with those sales. To determine whether the duty assessment rates are de minimis, in accordance with the requirement set forth in 19 CFR 351.106(c)(2), we calculated importer-specific (or customer-specific) ad valorem ratios based on estimated entered values.
We will instruct CBP to assess antidumping duties on all appropriate entries covered by this review for each importer (or customer) for which the importer-specific (or customer-specific) ad valorem ratio is above de minimis (i.e., at or above 0.50 percent). Pursuant to 19 CFR 351.106(c)(2), we will instruct CBP to liquidate without regard to antidumping duties any entries for which the importer-specific (or customer-specific) ad valorem ratio is de minimis (i.e., less than 0.50 percent).
The Department clarified its “automatic assessment” regulation on May 6, 2003. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment Policy Notice). This clarification will apply to entries of subject merchandise during the POR produced by the company included in the final results where the reviewed companies did not know the merchandise it sold to the intermediary (e.g., a reseller, trading company, or exporter) was destined for the United States. In such instances, we will instruct CBP to liquidate Start Printed Page 62368unreviewed entries at the all-others rate if there was no rate calculated in this review for the intermediary involved in the transaction. See id., 68 FR at 23954.
Cash Deposit Requirements
The following cash deposit requirements will be effective upon publication of these final results for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of these final results of administrative review, consistent with section 751(a)(1) of the Act: (1) The cash deposit rate for the reviewed company will be the rate listed above; (2) if the exporter is not a firm covered in this review, but was covered in a previous review or the original less-than-fair-value (LTFV) investigation, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original LTFV investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 9.70 percent, the all-others rate established in the LTFV investigation. See Certain Circular Welded Carbon Steel Pipes and Tubes From Taiwan: Antidumping Duty Order, 49 FR 19369 (May 7, 1984). These deposit requirements, when imposed, shall remain in effect until further notice.
Notification to Interested Parties
This notice also serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department's presumption that reimbursement of the antidumping duties occurred and the subsequent assessment of doubled antidumping duties.
This notice also serves as a reminder to parties subject to administrative protective orders (APOs) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
This notice is issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.Start Signature
Dated: September 30, 2010.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration.
Appendix—List of Issues in Decision Memorandum
Comment 1: Date of Sale for U.S. Sales
Comment 2: ZeroingEnd Supplemental Information
[FR Doc. 2010-25298 Filed 10-7-10; 8:45 am]
BILLING CODE 3510-DS-P