Skip to Content

Rule

The Commerce Control List

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

CFR Correction

In Title 15 of the Code of Federal Regulations, Parts 300-799, revised as of January 1, 2011, on page 684, in Supplement No. 1 to Part 774, in ECCN 1C118, the “Items” paragraph is revised to read as follows:

Supplement No. 1 to PART 774—THE COMMERCE CONTROL LIST

* * * * *

1C118 Titanium-stabilized duplex stainless steel (Ti-DSS), having all of the following characteristics (see List of Items Controlled).

* * * * *

Items:

a. Having all of the following characteristics:

a.1. Containing 17.0-23.0 weight percent chromium and 4.5-7.0 weight percent nickel;

a.2. Having a titanium content of greater than 0.10 weight percent; and

a.3. A ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10 percent is austenite by volume (according to ASTM E-1181-87 or national equivalents), and

b. Having any of the following forms:

b.1. Ingots or bars having a size of 100 mm or more in each dimension;

b.2. Sheets having a width of 600 mm or more and a thickness of 3 mm or less; or

b.3. Tubes having an outer diameter of 600 mm or more and a wall thickness of 3 mm or less.

* * * * *
End Preamble

[FR Doc. 2011-27751 Filed 10-25-11; 8:45 am]

BILLING CODE 1505-01-D