Import Administration, International Trade Administration, Department of Commerce.
On July 7, 2011, the U.S. Department of Commerce (“the Department”) published its preliminary results of the administrative review of the antidumping duty order on certain large diameter carbon and alloy seamless standard, line, and pressure pipe (over 4 1/2 inches) from Japan. The review covers four manufacturers/exporters: JFE Steel Corporation (“JFE”); Nippon Steel Corporation (“Nippon”); NKK Tubes (“NKK”); and Sumitomo Metal Industries, Ltd. (“SMI”). The period of review (“POR”) is June 1, 2009, through May 31, 2010. We received no comments on our preliminary results. Therefore, the final results do not differ from the preliminary results. We have reached a final determination of no shipments by the respondents in this administrative review. We will instruct U.S. Customs and Border Protection (“CBP”) to assess antidumping duties on all appropriate entries.
Effective Date: October 27, 2011.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Joshua Morris, AD/CVD Operations, Office 1, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-1779.End Further Info End Preamble Start Supplemental Information
On July 7, 2011, the Department published the preliminary results of the administrative review of the antidumping duty order on carbon and alloy seamless standard, line, and pressure pipe (over 41/2 inches) from Japan for the period June 1, 2009, through May 31, 2010. See Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Over 4 1/2 Inches) From Japan: Final Results Start Printed Page 66689of the Antidumping Duty Administrative Review, 76 FR 39852 (July 7, 2011) (“preliminary results”). We invited interested parties to comment on our preliminary results. We received no comments.
Scope of the Order
The products covered by the order are large diameter seamless carbon and alloy (other than stainless) steel standard, line, and pressure pipes produced, or equivalent, to the American Society for Testing and Materials (“ASTM”) A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, and the American Petroleum Institute (“API”) 5L specifications and meeting the physical parameters described below, regardless of application. The scope of the order also includes all other products used in standard, line, or pressure pipe applications and meeting the physical parameters described below, regardless of specification, with the exception of the exclusions discussed below. Specifically included within the scope of the order are seamless pipes greater than 4.5 inches (114.3 mm) up to and including 16 inches (406.4 mm) in outside diameter, regardless of wall-thickness, manufacturing process (hot finished or cold-drawn), end finish (plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish.
The seamless pipes subject to the order are currently classifiable under the subheadings 7304.10.10.30, 7304.10.10.45, 7304.10.10.60, 7304.10.50.50, 7304.19.10.30, 7304.19.10.45, 7304.19.10.60, 7304.19.50.50, 7304.31.60.10, 7304.31.60.50, 7304.39.00.04, 7304.39.00.06, 7304.39.00.08, 7304.39.00.36, 7304.39.00.40, 7304.39.00.44, 7304.39.00.48, 7304.39.00.52, 7304.39.00.56, 7304.39.00.62, 7304.39.00.68, 7304.39.00.72, 7304.51.50.15, 7304.51.50.45, 7304.51.50.60, 7304.59.20.30, 7304.59.20.55, 7304.59.20.60, 7304.59.20.70, 7304.59.60.00, 7304.59.80.30, 7304.59.80.35, 7304.59.80.40, 7304.59.80.45, 7304.59.80.50, 7304.59.80.55, 7304.59.80.60, 7304.59.80.65, and 7304.59.80.70 of the Harmonized Tariff Schedule of the United States (“HTSUS”).
Specifications, Characteristics, and Uses: Large diameter seamless pipe is used primarily for line applications such as oil, gas, or water pipeline, or utility distribution systems. Seamless pressure pipes are intended for the conveyance of water, steam, petrochemicals, chemicals, oil products, natural gas and other liquids and gasses in industrial piping systems. They may carry these substances at elevated pressures and temperatures and may be subject to the application of external heat. Seamless carbon steel pressure pipe meeting the ASTM A-106 standard may be used in temperatures of up to 1000 degrees Fahrenheit, at various American Society of Mechanical Engineers (“ASME”) code stress levels. Alloy pipes made to ASTM A-335 standard must be used if temperatures and stress levels exceed those allowed for ASTM A-106. Seamless pressure pipes sold in the United States are commonly produced to the ASTM A-106 standard.
Seamless standard pipes are most commonly produced to the ASTM A-53 specification and generally are not intended for high temperature service. They are intended for the low temperature and pressure conveyance of water, steam, natural gas, air and other liquids and gasses in plumbing and heating systems, air conditioning units, automatic sprinkler systems, and other related uses. Standard pipes (depending on type and code) may carry liquids at elevated temperatures but must not exceed relevant ASME code requirements. If exceptionally low temperature uses or conditions are anticipated, standard pipe may be manufactured to ASTM A-333 or ASTM A-334 specifications.
Seamless line pipes are intended for the conveyance of oil and natural gas or other fluids in pipe lines. Seamless line pipes are produced to the API 5L specification.
Seamless water well pipe (ASTM A-589) and seamless galvanized pipe for fire protection uses (ASTM A-795) are used for the conveyance of water.
Seamless pipes are commonly produced and certified to meet ASTM A-106, ASTM A-53, API 5L-B, and API 5L-X42 specifications. To avoid maintaining separate production runs and separate inventories, manufacturers typically triple or quadruple certify the pipes by meeting the metallurgical requirements and performing the required tests pursuant to the respective specifications. Since distributors sell the vast majority of this product, they can thereby maintain a single inventory to service all customers.
The primary application of ASTM A-106 pressure pipes and triple or quadruple certified pipes in large diameters is for use as oil and gas distribution lines for commercial applications. A more minor application for large diameter seamless pipes is for use in pressure piping systems by refineries, petrochemical plants, and chemical plants, as well as in power generation plants and in some oil field uses (on shore and off shore) such as for separator lines, gathering lines and metering runs. These applications constitute the majority of the market for the subject seamless pipes. However, ASTM A-106 pipes may be used in some boiler applications.
The scope of the order includes all seamless pipe meeting the physical parameters described above and produced to one of the specifications listed above, regardless of application, with the exception of the exclusions discussed below, whether or not also certified to a non-covered specification. Standard, line, and pressure applications and the above-listed specifications are defining characteristics of the scope of the order. Therefore, seamless pipes meeting the physical description above, but not produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, and API 5L specifications shall be covered if used in a standard, line, or pressure application, with the exception of the specific exclusions discussed below.
For example, there are certain other ASTM specifications of pipe which, because of overlapping characteristics, could potentially be used in ASTM A-106 applications. These specifications generally include ASTM A-161, ASTM A-192, ASTM A-210, ASTM A-252, ASTM A-501, ASTM A-523, ASTM A-524, and ASTM A-618. When such pipes are used in a standard, line, or pressure pipe application, such products are covered by the scope of the order.
Specifically excluded from the scope of the order are: A. Boiler tubing and mechanical tubing, if such products are not produced to ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, and API 5L specifications and are not used in standard, line, or pressure pipe applications. B. Finished and unfinished oil country tubular goods (“OCTG”), if covered by the scope of another antidumping duty order from the same country. If not covered by such an OCTG order, finished and unfinished OCTG are included in the scope when used in standard, line or pressure applications. C. Products produced to the A-335 specification unless they are used in an application that would normally utilize ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, and API 5L specifications. D. Line and riser pipe for deepwater application, i.e., line and riser pipe that is: (1) Used in a deepwater application, which means for Start Printed Page 66690use in water depths of 1,500 feet or more; (2) intended for use in and is actually used for a specific deepwater project; (3) rated for a specified minimum yield strength of not less than 60,000 psi; and (4) not identified or certified through the use of a monogram, stencil, or otherwise marked with an API specification (e.g., “API 5L”).
With regard to the excluded products listed above, the Department will not instruct CBP to require end-use certification until such time as petitioner or other interested parties provide to the Department a reasonable basis to believe or suspect that the products are being utilized in a covered application. If such information is provided, we will require end-use certification only for the product(s) (or specification(s)) for which evidence is provided that such products are being used in a covered application as described above. For example, if, based on evidence provided by petitioner, the Department finds a reasonable basis to believe or suspect that seamless pipe produced to the A-335 specification is being used in an A-106 application, we will require end-use certifications for imports of that specification. Normally we will require only the importer of record to certify to the end use of the imported merchandise. If it later proves necessary for adequate implementation, we may also require producers who export such products to the United States to provide such certification on invoices accompanying shipments to the United States.
Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the merchandise subject to this scope is dispositive.
Final Determination of No Shipments
As we stated in the preliminary results, our practice concerning no-shipment respondents had been to rescind the administrative review if the respondent certifies that it had no shipments and we have confirmed through our examination of CBP data that there were no shipments of subject merchandise during the POR. See 19 CFR 351.213(d)(3); see also Oil Country Tubular Goods from Japan: Preliminary Results of Antidumping Duty Administrative Review and Partial Rescission of Review, 70 FR 53161, 53161-53163 (September 7, 2005), unchanged in Oil Country Tubular Goods from Japan: Final Results and Partial Rescission of Antidumping Duty Administrative Review, 71 FR 95 (January 3, 2006). In such circumstances, we normally instructed CBP to liquidate any entries from the no-shipment company at the deposit rate in effect on the date of entry.
In our May 6, 2003, “automatic assessment” clarification, we explained that, where respondents in an administrative review demonstrate that they had no knowledge of sales through resellers to the United States, we would instruct CBP to liquidate such entries at the all-others rate applicable to the proceeding. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (“Assessment Policy Notice”).
As we stated in the preliminary results, because “as entered” liquidation instructions do not alleviate the concerns which the May 6, 2003, clarification was intended to address, we find it appropriate in this case to instruct CBP to liquidate any existing entries of merchandise produced by Nippon, JFE, SMI, or NKK, and exported by other parties at the all-others rate. In addition, we continue to find it is more consistent with the May 6, 2003, clarification not to rescind the review in these circumstances but, rather, to complete the review with respect to Nippon, JFE, SMI, and NKK, and issue appropriate instructions to CBP based on the final results of the review. See the “Assessment Rates” section of this notice below.
The Department intends to issue assessment instructions directly to CBP 15 days after the date of publication of these final results of this review.
As noted above, the Department clarified its “automatic assessment” regulation on May 6, 2003. See Assessment Policy Notice. This clarification will apply to POR entries by all respondent companies because they certified that they made no POR shipments of subject merchandise for which they had knowledge of U.S. destination. We will instruct CBP to liquidate these entries at the all-others rate established in the less-than-fair-value investigation (68.88 percent) if there is no rate for the intermediary involved in the transaction. See Assessment Policy Notice for a full discussion of this clarification.
Notification to Importers
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties.
Notification Regarding APOs
This notice also serves as a reminder to parties subject to administrative protective order (“APO”) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely notification of destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
These final results of administrative review and notice are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.Start Signature
Dated: October 20, 2011.
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration.
[FR Doc. 2011-27872 Filed 10-26-11; 8:45 am]
BILLING CODE 3510-DS-P