Skip to Content

Notice

Certain Cut-to-Length Carbon-Quality Steel Plate Products From the Republic of Korea: Preliminary Results of Antidumping Duty Administrative Review; 2011-2012

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble Start Printed Page 4385

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (the Department) is conducting an administrative review of the antidumping duty order on certain cut-to-length carbon-quality steel plate products (CTL plate) from the Republic of Korea (Korea). The period of review (POR) is February 1, 2011, through January 31, 2012. We preliminarily find that the subject merchandise has not been sold at less than normal value.

DATES:

Effective Date: January 22, 2013.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Yang Jin Chun, AD/CVD Operations, Office 1, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington DC 20230; telephone (202) 482-5760.

Scope of the Order

The products covered by the antidumping duty order are certain CTL plate. Imports of CTL plate are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 7208.40.30.30, 7208.40.30.60, 7208.51.00.30, 7208.51.00.45, 7208.51.00.60, 7208.52.00.00, 7208.53.00.00, 7208.90.00.00, 7210.70.30.00, 7210.90.90.00, 7211.13.00.00, 7211.14.00.30, 7211.14.00.45, 7211.90.00.00, 7212.40.10.00, 7212.40.50.00, 7212.50.00.00, 7225.40.30.50, 7225.40.70.00, 7225.50.60.00, 7225.99.00.90, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. The HTSUS subheadings are provided for convenience and customs purposes. The written description is dispositive. A full description of the scope of the order is contained in the memorandum from Gary Taverman, Senior Advisor for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Import Administration, “Preliminary Decision Memorandum for the Administrative Review of the Antidumping Duty Order on Certain Cut-to-Length Carbon-Quality Steel Plate Products from the Republic of Korea” dated concurrently with this notice (“Preliminary Decision Memorandum”), which is hereby adopted by this notice.

The Preliminary Decision Memorandum is a public document and is on file electronically via Import Administration's Antidumping and Countervailing Duty Centralized Electronic Service System (“IA ACCESS”). Access to IA ACCESS is available to registered users at http://iaaccess.trade.gov and is available to all parties in the Central Records Unit, room 7046 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly on the Internet at http://www.trade.gov/​ia/​. The signed Preliminary Decision Memorandum and the electronic versions of the Preliminary Decision Memorandum are identical in content.

Preliminary Determination of No Reviewable Entries

We received timely submission of letters from Daewoo International Corp. (Daewoo), Dongbu Steel Co., Ltd. (Dongbu), GS Global Corp. (GS Global), and Hyundai Steel Co. (Hyundai Steel) reporting to the Department that they had no exports, sales or entries of subject merchandise to the United States during the POR.[1] Based on record evidence, we preliminarily determine that Daewoo, Dongbu, GS Global, and Hyundai Steel had no reviewable entries during the POR.

Methodology

The Department has conducted this review in accordance with section 751(a)(1)(B) of the Tariff Act of 1930, as amended (the Act). Constructed export price is calculated in accordance with section 772 of the Act. Normal value is calculated in accordance with section 773 of the Act. In accordance with section 773(b) of the Act, we disregarded certain sales made by Dongkuk Steel Mill Co., Ltd. (DSM) in the home market which were made at below-cost prices.

For a full description of the methodology underlying our conclusions, see Preliminary Decision Memorandum.

Rates for Respondents Not Selected for Individual Examination

Generally we have looked to section 735(c)(5) of the Act, which provides instructions for calculating the all-others rate in an investigation, for guidance when calculating the rate for respondents not selected for individual review.

Therefore, based on the facts available, and in accordance with the statute, we determine that a reasonable method for determining the weighted-average dumping margins for the non-selected respondents in this review (i.e., Samsung C&T Corp. and TCC Steel Corp.) is to assign the rate calculated for DSM, which is the sole company selected for individual examination.

For a full description of the methodology we used in calculating rates for respondents not selected for individual examination, see Preliminary Decision Memorandum.

Preliminary Results of the Review

As a result of this review, we preliminarily determine that the following weighted-average dumping margins exist for the respondents for the period February 1, 2011, through January 31, 2012.

Manufacturer/ExporterWeighted-average dumping margin (percent)
Dongkuk Steel Mill Co., Ltd.0.00
Samsung C&T Corp.0.00
TCC Steel Corp.0.00

Disclosure and Public Comment

Pursuant to 19 CFR 351.309(c), interested parties may submit case briefs not later than 30 days after the date of publication of this notice. Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than five days after the date for filing case briefs.[2] Parties who submit case briefs or rebuttal briefs in this proceeding are encouraged to submit with each argument: (1) A statement of the issue, (2) a brief summary of the argument, and (3) a table of authorities.[3]

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, or to participate if one is requested, must submit a written request to the Assistant Secretary for Import Administration, filed electronically via IA ACCESS. An electronically filed document must be received successfully in its entirety by the Department's electronic records system, IA ACCESS, by 5 p.m. Eastern Standard Time within 30 days after the date of publication of this notice.[4] Requests should contain: (1) The party's name, address and telephone number; Start Printed Page 4386(2) the number of participants; and (3) a list of issues to be discussed. Issues raised in the hearing will be limited to those raised in the respective case briefs. The Department will issue the final results of this administrative review, including the results of its analysis of the issues raised in any written briefs, not later than 120 days after the date of publication of this notice, pursuant to section 751(a)(3)(A) of the Act.

Assessment Rates

If DSM's weighted-average dumping margin is above de minimis in the final results of this review, we will calculate an importer-specific assessment rate on the basis of the ratio of the total amount of antidumping duties calculated for the importer's examined sales and the total entered value of the sales in accordance with 19 CFR 351.212(b)(1).[5] If DSM's weighted-average dumping margin continues to be zero or de minimis in the final results of review, we will instruct U.S. Customs and Border Protection (CBP) not to assess duties on any of its entries in accordance with the Final Modification for Reviews, i.e., “where the weighted-average margin of dumping for the exporter is determined to be zero or de minimis, no antidumping duties will be assessed.” [6]

The Department clarified its “automatic assessment” regulation on May 6, 2003. This clarification will apply to entries of subject merchandise during the POR produced by DSM, which is the company selected for individual examination in this review, for which it did not know its merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. For a full discussion of this clarification, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003).

For the companies which were not selected for individual examination, Samsung C&T Corp. and TCC Steel Corp., we will instruct CBP to apply the rates listed above to all entries of subject merchandise produced and/or exported by those firms.

We intend to issue liquidation instructions to CBP 15 days after publication of the final results of this review.

Cash Deposit Requirements

The following deposit requirements will be effective upon publication of the notice of final results of administrative review for all shipments of CTL plate from Korea entered, or withdrawn from warehouse, for consumption on or after the date of publication as provided by section 751(a)(2) of the Act: (1) The cash deposit rate for companies subject to this review will be the rate established in the final results of this administrative review; (2) for merchandise exported by manufacturers or exporters not covered in this review but covered in a prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original investigation but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; (4) the cash deposit rate for all other manufacturers or exporters will continue to be 0.98 percent,[7] the all-others rate established in the less-than-fair-value investigation, adjusted for the export-subsidy rate in the companion countervailing duty investigation. These cash deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice serves as a preliminary reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

The Department is issuing and publishing these results in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

Start Signature

Dated: January 14, 2013.

Paul Piquado,

Assistant Secretary for Import Administration.

End Signature

Appendix

List of Topics Discussed in the Preliminary Decision Memorandum

Scope of the Order

Preliminary Determination of No Reviewable Entries

Rates for Respondents Not Selected for Individual Examination

Comparisons to Normal Value

Product Comparisons

Date of Sale

Level of Trade/CEP Offset

Constructed Export Price

Normal Value

A. Overrun Sales

B. Selection of Comparison Market

C. Affiliated Party Transactions and Arm's Length Test

D. Cost of Production

1. Calculation of Cost of Production

2. Test of Comparison Market Sales Prices

3. Results of the COP Test

E. Constructed Value

F. Calculation of Normal Value Based on Comparison Market Prices

Currency Conversion

End Further Info End Preamble

Footnotes

1.  See the letters from Daewoo, Dongbu, GS Global, and Hyundai Steel dated May 22, 2012, April 26, 2012, May 22, 2012, and April 24, 2012, respectively.

Back to Citation

3.  See 19 CFR 351.309(c)(2) and (d)(2).

Back to Citation

5.  In these preliminary results, the Department applied the assessment rate calculation method adopted in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101 (February 14, 2012) (Final Modification for Reviews).

Back to Citation

6.  See Final Modification for Reviews, 77 FR at 8102.

Back to Citation

7.  See, e.g., Certain Cut-to-Length Carbon-Quality Steel Plate Products From the Republic of Korea: Final Results of Antidumping Duty Administrative Review, 77 FR 21527, 21529 (April 10, 2012).

Back to Citation

[FR Doc. 2013-01179 Filed 1-18-13; 8:45 am]

BILLING CODE 3510-DS-P