Skip to Content

Rule

Amendment of Class E Airspace; Hot Springs, SD

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule.

SUMMARY:

This action amends Class E airspace at Hot Springs, SD. Additional controlled airspace is necessary to accommodate new Area Navigation (RNAV) Standard Instrument Approach Procedures at Hot Springs Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. Geographic coordinates of the airport are also updated.

DATES:

Effective date: 0901 UTC, June 27, 2013. The Director of the Federal Register approves this incorporation by reference action under 1 CFR Part 51, subject to the annual revision of FAA Order 7400.9 and publication of conforming amendments.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Scott Enander, Central Service Center, Operations Support Group, Federal Aviation Administration, Southwest Region, 2601 Meacham Blvd., Fort Worth, TX 76137; telephone 817-321-7716.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

History

On November 16, 2012, the FAA published in the Federal Register a notice of proposed rulemaking (NPRM) to amend Class E airspace for the Hot Springs, SD, area, creating additional controlled airspace at Hot Springs Municipal Airport (77 FR 68716) Docket No. FAA-2012-0655. Interested parties were invited to participate in this rulemaking effort by submitting written comments on the proposal to the FAA. No comments were received. Class E airspace designations are published in paragraph 6005 of FAA Order 7400.9W dated August 8, 2012, and effective September 15, 2012, which is incorporated by reference in 14 CFR part 71.1. The Class E airspace designations listed in this document will be published subsequently in the Order.

The Rule

This action amends Title 14 Code of Federal Regulations (14 CFR) Part 71 by amending Class E airspace extending upward from 700 feet above the surface to the north of the airport to accommodate new standard instrument approach procedures at Hot Springs Municipal Airport, Hot Springs, SD. This action is necessary for the safety and management of IFR operations at the airport. Geographic coordinates of the airport are updated to coincide with the FAA's aeronautical database.

The FAA has determined that this regulation only involves an established body of technical regulations for which frequent and routine amendments are necessary to keep them operationally current. Therefore, this regulation: (1) Is not a “significant regulatory action” under Executive Order 12866; (2) is not a “significant rule” under DOT Regulatory Policies and Procedures (44 FR 11034; February 26, 1979); and (3) does not warrant preparation of a regulatory evaluation as the anticipated impact is so minimal. Since this is a routine matter that will only affect air traffic procedures and air navigation, it is certified that this rule, when promulgated, will not have a significant economic impact on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

The FAA's authority to issue rules regarding aviation safety is found in Title 49 of the U.S. Code. Subtitle 1, Section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the agency's authority. This rulemaking is promulgated under the authority described in Subtitle VII, Part A, Subpart I, Section 40103. Under that section, the FAA is charged with prescribing regulations to assign the use of airspace necessary to ensure the safety of aircraft and the efficient use of airspace. This regulation is within the scope of that authority as it amends controlled airspace at Hot Springs Municipal Airport, Hot Springs, SD.

Environmental Review

The FAA has determined that this action qualifies for categorical exclusion under the National Environmental Policy Act in accordance with FAA Order 1050.1E, “Environmental Impacts: Policies and Procedures,” paragraph 311a. This airspace action is not expected to cause any potentially significant environmental impacts, and no extraordinary circumstances exist that warrant preparation of an environmental assessment.

Start List of Subjects

List of Subjects in 14 CFR Part 71

  • Airspace
  • Incorporation by reference
  • Navigation (Air)
End List of Subjects

Adoption of the Amendment

In consideration of the foregoing, the Federal Aviation Administration amends 14 CFR Part 71 as follows:

Start Part

PART 71—DESIGNATION OF CLASS A, B, C, D, AND E AIRSPACE AREAS; AIR TRAFFIC SERVICE ROUTES; AND REPORTING POINTS

End Part Start Amendment Part

1. The authority citation for 14 CFR Part 71 continues to read as follows:

End Amendment Part Start Authority

Authority: 49 U.S.C. 106(g), 40103, 40113, 40120; E. O. 10854, 24 FR 9565, 3 CFR, 1959-1963 Comp., p. 389.

End Authority
Start Printed Page 14912
[Amended]
Start Amendment Part

2. The incorporation by reference in 14 CFR Part 71.1 of the Federal Aviation Administration Order 7400.9W, Airspace Designations and Reporting Points, dated August 8, 2012, and effective September 15, 2012, is amended as follows:

End Amendment Part

Paragraph 6005: Class E airspace areas extending upward from 700 feet or more above the surface.

* * * * *

AGL SD E5 Hot Springs, SD [Amended]

Hot Springs Municipal Airport, SD

(Lat. 43°22′06″ N., long. 103°23′18″ W.)

That airspace extending upward from 700 feet above the surface within a 7.4-mile radius of Hot Springs Municipal Airport, and within 2 miles each side of the 021° bearing from the airport extending from the 7.4-mile radius to 12.1 miles north of the airport.

Start Signature

Issued in Fort Worth, Texas, on February 12, 2013.

David P. Medina,

Manager, Operations Support Group, ATO Central Service Center.

End Signature End Supplemental Information

[FR Doc. 2013-05214 Filed 3-7-13; 8:45 am]

BILLING CODE 4910-13-P