Skip to Content


Foreign-Trade Zone (FTZ) 104-Savannah, Georgia; Notification of Proposed Production Activity; Firth Rixson Forgings LLC (Aerospace and Industrial Turbine Engine Parts, Forgings); Midway, Georgia

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

The World Trade Center Savannah, LLC, grantee of FTZ 104, submitted a notification of proposed production activity to the FTZ Board on behalf of Firth Rixson Forgings LLC (Firth Rixson), located in Midway, Georgia. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on February 4, 2014.

The Firth Rixson facility is located within Site 21 of FTZ 104. The facility is used for the production of nickel, aluminum, and titanium-based closed die ISO-thermal forgings and parts of turbine engines (e.g., rings and discs) used in aerospace and industrial gas turbine applications. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and specific finished products described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. The proposed scope of FTZ production authority would not involve inverted tariff benefits on foreign titanium inputs (all foreign titanium will be admitted to the zone in privileged foreign status (19 CFR 146.41)).

Production under FTZ procedures could exempt Firth Rixson from customs duty payments on the foreign status material inputs used in export production. On its domestic sales, Firth Rixson would be able to defer payment of customs duties on the foreign titanium inputs (duty rate—15%). Customs duties also could possibly be deferred or reduced on foreign status production equipment.

The materials sourced from abroad include: Titanium alloy, aluminum alloy, and nickel alloy (duty rate ranges from free to 15%).

Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board's Executive Secretary at the address below. The closing period for their receipt is April 14, 2014.

A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230-0002, and in the “Reading Room” section of the FTZ Board's Web site, which is accessible via​ftz.

Start Further Info


Pierre Duy at or (202) 482-1378.

Start Signature

Dated: February 20, 2014.

Andrew McGilvray,

Executive Secretary.

End Signature End Further Info End Preamble

[FR Doc. 2014-04634 Filed 2-28-14; 8:45 am]