This PDF is the current document as it appeared on Public Inspection on 06/27/2014 at 08:45 am.
Occupational Safety and Health Administration (OSHA), Labor.
Notice; announcement of OMB approval of information collection requirements.
The Occupational Safety and Health Administration announces that the Office of Management and Budget (OMB) extended its approval for a number of information collection requirements found in sections of 29 CFR parts 1910 and 1926, and other regulations and requirements. OSHA sought approval of these requirements under the Paperwork Reduction Act of 1995 (PRA-95), and, as required by that Act, is announcing the approval numbers and expiration dates for these requirements.
This notice is effective June 30, 2014.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen, Start Printed Page 36832Directorate of Standards and Guidance, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3609, 200 Constitution Avenue NW., Washington, DC 20210, telephone: (202) 693-2222.End Further Info End Preamble Start Supplemental Information
In a series of Federal Register notices, the Agency announced its requests to OMB to renew their approvals for various information collection (paperwork) requirements in its safety and health standards pertaining to general industry and the construction industry (i.e., 29 CFR parts 1910 and 1926), procedures for conflict of interest, OSHA's student data forms, regulations containing procedures for handling of retaliation complaints, and requirements for the Occupational Safety and Health Administration Training Institute Education Centers Program and Outreach Training Program. In these Federal Register announcements, the Agency provided 60-day comment periods for the public to respond to OSHA's burden hour and cost estimates.
In accord with PRA-95 (44 U.S.C. 3501-3520), OMB renewed its approval for these information collection requirements, and assigned OMB control numbers to these requirements. The table below provides the following information for each of these information collection requirements approved by OMB: The title of the Federal Register notice; the Federal Register reference (date, volume, and leading page); OMB's Control Number; and the new expiration date.
|Title of the information collection request||Date of Federal Register Publication, Federal Register reference, and OSHA Docket No.||OMB Control No.||Expiration date|
|Access to Employee Exposure and Medical Records (29 CFR 1910.1020)||09/09/2013, 78 FR 55114, Docket No. OSHA-2009-0043||1218-0065||02/28/2017|
|Aerial Lifts in Construction (29 CFR 1926.453)||10/30/2013, 78 FR 64982, Docket No. OSHA-2009-0045||1218-0216||02/28/2017|
|Asbestos in General Industry (29 CFR 1910.1001)||06/07/2013, 78 FR 34406, Docket No. OSHA-2010-0018||1218-0133||02/28/2017|
|Conflict of Interest (COI) and Disclosure Form (OSHA 7)||07/16/2013, 78 FR 42549, Docket No. OSHA-2009-0042||1218-0255||02/28/2017|
|Construction Fall Protection Systems Criteria and Practices (29 CFR 1925.502), and Training Requirements (29 CFR 1926.503)||09/27/2013, 78 FR 59725, Docket No. OSHA-2010-0008||1218-0197||02/28/2017|
|Cranes and Derricks in Construction (29 CFR part 1926, subpart CC)||09/13/2013, 78 FR 56742, Docket No. OSHA-2013-0021||1218-0261||02/28/2017|
|Crawler, Locomotive, and Truck Cranes (29 CFR 1910.180)||06/05/2013, 78 FR 33860, Docket No. OSHA-2010-0015||1218-0221||02/28/2017|
|Derricks (29 CFR 1910.181)||04/09/2013, 78 FR 21157, Docket No. 2010-0016||1218-0222||10/31/2016|
|Dip Tanks (Dipping and Coating Operations—Additional Requirements for Special Operations) (29 CFR 1910.126(g)(4))||04/09/2013, 78 FR 21159, Docket No. OSHA-2010-0020||1218-0237||10/31/2016|
|Formaldehyde (29 CFR 1910.1048)||08/23/2013, 78 FR 52567, Docket No. OSHA-2009-0041||1218-0145||02/28/2017|
|Nationally Recognized Testing Laboratory (NRTL) (Definition, and Requirements) (29 CFR 1910.7)||10/02/2013, 78 FR 60898, Docket No. OSHA-2010-0007||1218-0147||02/28/2017|
|Noise Exposure (29 CFR 1910.95)||07/30/2013, 78 FR 45981, Docket No. OSHA-2010-0017||1218-0048||02/28/2017|
|Presence Sensing Device Initiation (PSDI) (29 CFR 1910.217(h))||04/09/2013, 78 FR 21155, Docket No. OSHA-2010-0009||1218-0143||04/30/2017|
|Regulations Containing Procedures for Handling of Retaliation Complaints||01/17/2013, 78 FR 3918, Docket No. OSHA-2012-0026||1218-0236||07/31/2016|
|Requirements for the Occupational Safety and Health Administration Training Institute Education Centers Program and Outreach Training Program||08/05/2013, 78 FR 47419, Docket No. OSHA-2009-0022||1218-0262||02/28/2017|
|Student Data Form (OSHA Form 182)||08/23/2013, 78 FR 52565, Docket No. OSHA-2010-0022||1218-0172||02/28/2017|
|Welding, Cutting, and Brazing (29 CFR part 1910, subpart Q)||08/28/2013, 78 FR 53159, Docket No. OSHA-2010-0037||1218-0207||02/28/2017|
In accord with 5 CFR 1320.5(b), an agency cannot conduct, sponsor, or require a response to a collection of information unless the collection displays a valid OMB control number and the agency informs respondents that they need not respond to the collection of information unless it displays a valid OMB control number.
Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is 44 U.S.C. 3506 et seq. and Secretary of Labor's Order No. 1-2012 (77 FR 3912).Start Signature
Signed at Washington, DC, on June 25, 2014.
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-15236 Filed 6-27-14; 8:45 am]
BILLING CODE 4510-26-P