This PDF is the current document as it appeared on Public Inspection on 10/29/2014 at 08:45 am.
Enforcement and Compliance, International Trade Administration, Department of Commerce.
On August 18, 2014, the Department of Commerce (the “Department”) published its Preliminary Results of a changed circumstances review and intent to revoke, in part, the antidumping duty (“AD”) order on wooden bedroom furniture from the People's Republic of China (“PRC”)  with respect to certain wall bed units. The Department preliminarily determined that the producers accounting for substantially all of the production of the domestic like product to which the Order pertains lack interest in the relief provided by the Order with respect to certain wall bed units. We invited interested parties to comment on the Preliminary Results. As no parties submitted comments, the Department is making no changes to the Preliminary Results.
Effective Date: October 30, 2014.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Erin Kearney or Howard Smith, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0167 or (202) 482-5193, respectively.
On January 4, 2005, the Department published the Order in the Federal Register. On March 12, 2014, the Department received a request on behalf of Techcraft Manufacturing, Inc. (“Techcraft”) for a changed circumstances review to revoke, in part, the Order with respect to certain wall bed units. On May 2, 2014, the Department published the Initiation Notice for this changed circumstances review in the Federal Register. On August 18, 2014, the Department made a preliminary determination that producers accounting for substantially all of the production of the domestic like product lack interest in the relief afforded by the Order with respect to the certain wall bed units described in Techcraft's Request. We invited interested parties to submit comments in accordance with 19 CFR 351.309(c)(1)(ii). We received no comments.
Final Results of Changed Circumstances Review, and Revocation of the Order, in Part
Because no party submitted comments opposing the Department's Preliminary Results, and the record contains no other information or evidence that calls into question the Preliminary Results, the Department determines that there are changed circumstances that warrant revocation of the Order, in part. Specifically, because the producers accounting for substantially all of the production of the domestic like product to which the Order pertains lack interest in the relief provided by the Order with respect to certain wall bed units, we are revoking the Order, in part, with respect to certain wall bed units by including the following language in the scope of the Order:
Also excluded from the scope are certain enclosable wall bed units, also referred to as murphy beds, which are composed of the following three major sections: (1) A metal wall frame, which attaches to the wall and uses coils or pistons to support the metal mattress frame; (2) a metal frame, which has Start Printed Page 64570euro slats for supporting a mattress and two legs that pivot; and (3) wood panels, which attach to the metal wall frame and/or the metal mattress frame to form a cabinet to enclose the wall bed when not in use. Excluded enclosable wall bed units are imported in ready-to-assemble format with all parts necessary for assembly. Enclosable wall bed units do not include a mattress. Wood panels of enclosable wall bed units, when imported separately, remain subject to the order.
The scope description below includes this exclusion language.
Scope of the Order
The product covered by the order is wooden bedroom furniture. Wooden bedroom furniture is generally, but not exclusively, designed, manufactured, and offered for sale in coordinated groups, or bedrooms, in which all of the individual pieces are of approximately the same style and approximately the same material and/or finish. The subject merchandise is made substantially of wood products, including both solid wood and also engineered wood products made from wood particles, fibers, or other wooden materials such as plywood, strand board, particle board, and fiberboard, with or without wood veneers, wood overlays, or laminates, with or without non-wood components or trim such as metal, marble, leather, glass, plastic, or other resins, and whether or not assembled, completed, or finished.
The subject merchandise includes the following items: (1) Wooden beds such as loft beds, bunk beds, and other beds; (2) wooden headboards for beds (whether stand-alone or attached to side rails), wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds; (3) night tables, night stands, dressers, commodes, bureaus, mule chests, gentlemen's chests, bachelor's chests, lingerie chests, wardrobes, vanities, chessers, chifforobes, and wardrobe-type cabinets; (4) dressers with framed glass mirrors that are attached to, incorporated in, sit on, or hang over the dresser; (5) chests-on-chests, highboys, lowboys, chests of drawers, chests, door chests, chiffoniers, hutches, and armoires;  (6) desks, computer stands, filing cabinets, book cases, or writing tables that are attached to or incorporated in the subject merchandise; and (7) other bedroom furniture consistent with the above list.
The scope of the order excludes the following items: (1) Seats, chairs, benches, couches, sofas, sofa beds, stools, and other seating furniture; (2) mattresses, mattress supports (including box springs), infant cribs, water beds, and futon frames; (3) office furniture, such as desks, stand-up desks, computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs, servers, sideboards, buffets, corner cabinets, china cabinets, and china hutches; (5) other non-bedroom furniture, such as television cabinets, cocktail tables, end tables, occasional tables, wall systems, book cases, and entertainment systems; (6) bedroom furniture made primarily of wicker, cane, osier, bamboo or rattan; (7) side rails for beds made of metal if sold separately from the headboard and footboard; (8) bedroom furniture in which bentwood parts predominate;  (9) jewelry armories;  (10) cheval mirrors;  (11) certain metal parts;  (12) mirrors that do not attach to, incorporate in, sit on, or hang over a dresser if they are not designed and marketed to be sold in conjunction with a dresser as part of a dresser-mirror set; (13) upholstered beds;  and (14) toy boxes. Also excluded from the scope Start Printed Page 64571are certain enclosable wall bed units, also referred to as murphy beds, which are composed of the following three major sections: (1) A metal wall frame, which attaches to the wall and uses coils or pistons to support the metal mattress frame; (2) a metal frame, which has euro slats for supporting a mattress and two legs that pivot; and (3) wood panels, which attach to the metal wall frame and/or the metal mattress frame to form a cabinet to enclose the wall bed when not in use. Excluded enclosable wall bed units are imported in ready-to-assemble format with all parts necessary for assembly. Enclosable wall bed units do not include a mattress. Wood panels of enclosable wall bed units, when imported separately, remain subject to the order.
Imports of subject merchandise are classified under subheadings 9403.50.9042 and 9403.50.9045 of the HTSUS as “wooden . . . .beds” and under subheading 9403.50.9080 of the HTSUS as “other . . . . wooden furniture of a kind used in the bedroom.” In addition, wooden headboards for beds, wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds may also be entered under subheading 9403.50.9042 or 9403.50.9045 of the HTSUS as “parts of wood.” Subject merchandise may also be entered under subheadings 9403.50.9041, 9403.60.8081, or 9403.20.0018. Further, framed glass mirrors may be entered under subheading 7009.92.1000 or 7009.92.5000 of the HTSUS as “glass mirrors . . . framed.” The order covers all wooden bedroom furniture meeting the above description, regardless of tariff classification. Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the scope of this proceeding is dispositive.
Instructions to U.S. Customs and Border Protection
Because we determine that there are changed circumstances that warrant the revocation of the Order, in part, we will instruct U.S. Customs and Border Protection (“CBP”) to liquidate without regard to antidumping duties, and to refund any estimated antidumping duties on, all unliquidated entries of the merchandise covered by the revocation that are not covered by the final results of an administrative review or automatic liquidation.
This notice serves as a reminder to parties subject to an administrative protective order (“APO”) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.306. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
We are issuing and publishing these final results and revocation, in part, and notice in accordance with sections 751(b) and 777(i) of the Tariff Act of 1930, as amended, and 19 CFR 351.216, 19 CFR 351.221(c)(3), and 19 CFR 351.222.Start Signature
Dated: October 22, 2014.
Assistant Secretary for Enforcement and Compliance.
1. See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Wooden Bedroom Furniture From the People's Republic of China, 70 FR 329 (January 4, 2005) (“Order”).Back to Citation
2. See Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Changed Circumstances Review, and Intent To Revoke Antidumping Duty Order in Part, 79 FR 48727 (August 18, 2014) (“Preliminary Results”).Back to Citation
3. See Submission from Techcraft, “Techcraft Manufacturing Inc. Request for a Changed Circumstance Review,” dated March 12, 2014 (“Techcraft's Request”).Back to Citation
4. See Wooden Bedroom Furniture From the People's Republic of China: Notice of Initiation of Changed Circumstances Review, and Consideration of Revocation of the Antidumping Duty Order in Part, 79 FR 25110 (May 2, 2014) (“Initiation Notice”).Back to Citation
5. See Preliminary Results.Back to Citation
6. A chest-on-chest is typically a tall chest-of-drawers in two or more sections (or appearing to be in two or more sections), with one or two sections mounted (or appearing to be mounted) on a slightly larger chest; also known as a tallboy.Back to Citation
7. A highboy is typically a tall chest of drawers usually composed of a base and a top section with drawers, and supported on four legs or a small chest (often 15 inches or more in height).Back to Citation
8. A lowboy is typically a short chest of drawers, not more than four feet high, normally set on short legs.Back to Citation
9. A chest of drawers is typically a case containing drawers for storing clothing.Back to Citation
10. A chest is typically a case piece taller than it is wide featuring a series of drawers and with or without one or more doors for storing clothing. The piece can either include drawers or be designed as a large box incorporating a lid.Back to Citation
11. A door chest is typically a chest with hinged doors to store clothing, whether or not containing drawers. The piece may also include shelves for televisions and other entertainment electronics.Back to Citation
12. A chiffonier is typically a tall and narrow chest of drawers normally used for storing undergarments and lingerie, often with mirror(s) attached.Back to Citation
13. A hutch is typically an open case of furniture with shelves that typically sits on another piece of furniture and provides storage for clothes.Back to Citation
14. An armoire is typically a tall cabinet or wardrobe (typically 50 inches or taller), with doors, and with one or more drawers (either exterior below or above the doors or interior behind the doors), shelves, and/or garment rods or other apparatus for storing clothes. Bedroom armoires may also be used to hold television receivers and/or other audio-visual entertainment systems.Back to Citation
15. As used herein, bentwood means solid wood made pliable. Bentwood is wood that is brought to a curved shape by bending it while made pliable with moist heat or other agency and then set by cooling or drying. See CBP's Headquarters Ruling Letter 043859, dated May 17, 1976.Back to Citation
16. Any armoire, cabinet or other accent item for the purpose of storing jewelry, not to exceed 24 inches in width, 18 inches in depth, and 49 inches in height, including a minimum of 5 lined drawers lined with felt or felt-like material, at least one side door (whether or not the door is lined with felt or felt-like material), with necklace hangers, and a flip-top lid with inset mirror. See Issues and Decision Memorandum from Laurel LaCivita to Laurie Parkhill, Office Director, concerning “Jewelry Armoires and Cheval Mirrors in the Antidumping Duty Investigation of Wooden Bedroom Furniture From the People's Republic of China,” dated August 31, 2004. See also Wooden Bedroom Furniture From the People's Republic of China: Final Changed Circumstances Review, and Determination To Revoke Order in Part, 71 FR 38621 (July 7, 2006).Back to Citation
17. Cheval mirrors are any framed, tiltable mirror with a height in excess of 50 inches that is mounted on a floor-standing, hinged base. Additionally, the scope of the order excludes combination cheval mirror/jewelry cabinets. The excluded merchandise is an integrated piece consisting of a cheval mirror, i.e., a framed tiltable mirror with a height in excess of 50 inches, mounted on a floor-standing, hinged base, the cheval mirror serving as a door to a cabinet back that is integral to the structure of the mirror and which constitutes a jewelry cabinet line with fabric, having necklace and bracelet hooks, mountings for rings and shelves, with or without a working lock and key to secure the contents of the jewelry cabinet back to the cheval mirror, and no drawers anywhere on the integrated piece. The fully assembled piece must be at least 50 inches in height, 14.5 inches in width, and 3 inches in depth. See Wooden Bedroom Furniture From the People's Republic of China: Final Changed Circumstances Review and Determination To Revoke Order in Part, 72 FR 948 (January 9, 2007).Back to Citation
18. Metal furniture parts and unfinished furniture parts made of wood products (as defined above) that are not otherwise specifically named in this scope (i.e., wooden headboards for beds, wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such parts are usually classified under HTSUS subheadings 9403.90.7005, 9403.90.7010, or 9403.90.7080.Back to Citation
19. Upholstered beds that are completely upholstered, i.e., containing filling material and completely covered in sewn genuine leather, synthetic leather, or natural or synthetic decorative fabric. To be excluded, the entire bed (headboards, footboards, and side rails) must be upholstered except for bed feet, which may be of wood, metal, or any other material and which are no more than nine inches in height from the floor. See Wooden Bedroom Furniture From the People's Republic of China: Final Results of Changed Circumstances Review and Determination To Revoke Order in Part, 72 FR 7013 (February 14, 2007).Back to Citation
20. To be excluded the toy box must: (1) Be wider than it is tall; (2) have dimensions within 16 inches to 27 inches in height, 15 inches to 18 inches in depth, and 21 inches to 30 inches in width; (3) have a hinged lid that encompasses the entire top of the box; (4) not incorporate any doors or drawers; (5) have slow-closing safety hinges; (6) have air vents; (7) have no locking mechanism; and (8) comply with American Society for Testing and Materials (“ASTM”) standard F963-03. Toy boxes are boxes generally designed for the purpose of storing children's items such as toys, books, and playthings. See Wooden Bedroom Furniture From the People's Republic of China: Final Results of Changed Circumstances Review and Determination To Revoke Order in Part, 74 FR 8506 (February 25, 2009). Further, as determined in the scope ruling memorandum “Wooden Bedroom Furniture from the People's Republic of China: Scope Ruling on a White Toy Box,” dated July 6, 2009, the dimensional ranges used to identify the toy boxes that are excluded from the wooden bedroom furniture order apply to the box itself rather than the lid.Back to Citation
[FR Doc. 2014-25858 Filed 10-29-14; 8:45 am]
BILLING CODE 3510-DS-P