Enforcement and Compliance, International Trade Administration, Department of Commerce.
On July 30, 2014, the Department of Commerce (the “Department”) published the Preliminary Results of the 2012-2013 administrative review of the antidumping duty order on certain hot-rolled carbon steel flat products (“hot-rolled steel”) from the People's Republic of China (“PRC”).
The period of review (“POR”) is November 1, 2012, through October 31, 2013. We received no comments from interested parties. Start Printed Page 67416Therefore, the Department continues to find that Baosteel Group Corporation, Shanghai Baosteel International Economic & Trading Co., Ltd., and Baoshan Iron and Steel Co., Ltd. (collectively, “Baosteel”) had no reviewable transactions of subject merchandise to the United States during the POR.
Effective Date: November 13, 2014.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
Steven Hampton, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0116.
End Further Info
Start Supplemental Information
On July 30, 2014, the Department published the Preliminary Results of the administrative review of the antidumping duty order on hot-rolled steel from the PRC.
We invited interested parties to comment on the Preliminary Results. No party provided comments. The Department has conducted this administrative review in accordance with section 751(a)(1) of the Tariff Act of 1930, as amended (“the Act”).
Scope of the Order
The products covered by the order are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1,250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of the order. Specifically included within the scope of the order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (“IF”)) steels, high strength low alloy (“HSLA”) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum. Steel products included in the scope of the order, regardless of definitions in the Harmonized Tariff Schedule of the United States (“HTSUS”), are products in which: i) iron predominates, by weight, over each of the other contained elements; ii) the carbon content is two percent or less, by weight; and, iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description provided above are within the scope of the order unless otherwise excluded. The following products, for example, are outside or specifically excluded from the scope of the order:
- Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (“ASTM”) specifications A543, A387, A514, A517, A506).
- Society of Automotive Engineers (“SAE”)/American Iron & Steel Institute (“AISI”) grades of series 2300 and higher.
- Ball bearing steels, as defined in the HTSUS.
- Tool steels, as defined in the HTSUS.
- Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
- ASTM specifications A710 and A736.
- USS abrasion-resistant steels (USS AR 400, USS AR 500).
- All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
- Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.
The merchandise subject to the order is classified in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7126.96.36.199, 7188.8.131.52, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7184.108.40.206, 7220.127.116.11, and 718.104.22.168. Certain hot-rolled carbon steel flat products covered by the order, including: vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 722.214.171.124, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7126.96.36.199, 7188.8.131.52, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to the order is dispositive.
Final Determination of No Shipments
In the Preliminary Results, the Department preliminarily determined that Baosteel did not have any reviewable transactions of subject merchandise during the POR because there was no evidence on the record indicating that Baosteel had entries of subject merchandise during the POR.
We stated, consistent with the refinement to the Department's assessment practice in nonmarket economy (“NME”) cases, that we would not rescind the review in these circumstances but, rather, would complete the review with respect to Baosteel and issue appropriate instructions to U.S. Customs and Border Protection (“CBP”) based on the final results of the review.
As stated above, Start Printed Page 67417we did not receive any comments on the Preliminary Results. Therefore, we continue to determine that Baosteel had no reviewable transactions of subject merchandise during the POR. Consistent with our “automatic assessment” clarification, the Department will issue appropriate instructions to CBP based on our final results.
Upon issuance of the final results, the Department will determine, and CBP shall assess, antidumping duties on all appropriate entries, in accordance with 19 CFR 351.212. The Department intends to issue assessment instructions to CBP 15 days after the date of publication of the final results of review. The Department announced a refinement to its assessment practice in NME cases.
Pursuant to this refinement in practice, for entries that were not reported in the U.S. sales databases submitted by companies individually examined during this review, the Department will instruct CBP to liquidate such entries at the NME-wide rate. In addition, if the Department determines that an exporter under review had no shipments of the subject merchandise, any suspended entries that entered under that exporter's case number (i.e., at that exporter's rate) will be liquidated at the NME-wide rate.
Cash Deposit Requirements
The following cash deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of the subject merchandise from the PRC entered, or withdrawn from warehouse, for consumption on or after the publication date, as provided by section 751(a)(2)(C) of the Act: (1) for previously investigated or reviewed PRC and non-PRC exporters not listed above that have separate rates, the cash deposit rate will continue to be the exporter-specific rate published for the most recent period; (2) for all PRC exporters of subject merchandise which have not been found to be entitled to a separate rate, the cash deposit rate will be the PRC-wide rate of 90.83 percent; and (3) for all non-PRC exporters of subject merchandise which have not received their own rate, the cash deposit rate will be the rate applicable to the PRC exporters that supplied that non-PRC exporter. These deposit requirements, when imposed, shall remain in effect until further notice.
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties.
In accordance with 19 CFR 351.305(a)(3), this notice also serves as a reminder to parties subject to administrative protective order (“APO”) of their responsibility concerning the return or destruction of proprietary information disclosed under APO, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.
We are issuing and publishing this administrative review and notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act.
End Supplemental Information
Dated: November 4, 2014.
Ronald K. Lorentzen,
Acting Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2014-26794 Filed 11-12-14; 8:45 am]
BILLING CODE 3510-DS-P