Skip to Content

Proposed Rule

Criteria and Procedures for Assessment of Civil Penalties

This document is a correction of an document that was published on 07/31/2014. View Uncorrected Document

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

In proposed rule document 2014-17935 appearing on pages 44493-44518 in the issue of July 31, 2014, make the following correction:

Beginning on page 44497, Part 100 Table III is corrected to read as set forth below:

Part 100 Table III—Size of Metal/Nonmetal Mine

Existing ruleProposed rule
Annual hours worked at mine (× 1,000)Penalty points (out of maximum 208 points)Annual hours worked at mine (× 1,000)Penalty points (out of maximum 100 points)
0 to 500 to 50
>5 to 101
>10 to 202
>20 to 303
>30 to 504>5 to 2001
>50 to 1005
>100 to 2006
>200 to 3007
>300 to 5008
>500 to 7009>200 to 1,5002
>700 to 1,00010
>1,000 to 1,50011
>1,500 to 2,00012>1,500 to 3,0003
>2,000 to 3,00013
>3,000 to 5,00014>3,0004
>5,00015
End Preamble

[FR Doc. C1-2014-17935 Filed 11-14-14; 8:45 am]

BILLING CODE 1505-01-D