This PDF is the current document as it appeared on Public Inspection on 11/21/2014 at 08:45 am.
Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of Transportation (DOT).
Notice and request for comments.Start Printed Page 69991
In accordance with the Paperwork Reduction Act of 1995, PHMSA invites comments on certain information collections pertaining to hazardous materials transportation for which PHMSA intends to request renewal from the Office of Management and Budget (OMB).
Interested persons are invited to submit comments on or before January 23, 2015.
You may submit comments identified by the docket number (PHMSA-2014-0136) by any of the following methods:
- Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the online instructions for submitting comments.
- Fax: 1-202-493-2251.
- Mail: Docket Operations, U.S. Department of Transportation, West Building, Ground Floor, Room W12-140, Routing Symbol M-30, 1200 New Jersey Avenue SE., Washington, DC 20590.
- Hand Delivery: To Docket Operations, Room W12-140 on the ground floor of the West Building, 1200 New Jersey Avenue SE., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Instructions: All submissions must include the agency name and docket number or Regulation Identification Number (RIN) for this notice. Internet users may access comments received by DOT at: http://www.regulations.gov. Note that comments received will be posted without change to: http://www.regulations.gov including any personal information provided.
Requests for a copy of an information collection should be directed to Steven Andrews or T. Glenn Foster, Standards and Rulemaking Division (PHH-12), Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue SE., East Building, 2nd Floor, Washington, DC 20590-0001, Telephone (202) 366-8553.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Steven Andrews or T. Glenn Foster, Standards and Rulemaking Division (PHH-12), Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue SE., East Building, 2nd Floor, Washington, DC 20590-0001, Telephone (202) 366-8553.End Further Info End Preamble Start Supplemental Information
Section 1320.8 (d), Title 5, Code of Federal Regulations requires PHMSA to provide interested members of the public and affected agencies an opportunity to comment on information collection and recordkeeping requests. This notice identifies information collection requests that PHMSA will be submitting to OMB for renewal and extension. These information collections are contained in 49 CFR 171.6 of the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180). PHMSA has revised burden estimates, where appropriate, to reflect current reporting levels or adjustments based on changes in proposed or final rules published since the information collections were last approved. The following information is provided for each information collection: (1) Title of the information collection, including former title if a change is being made; (2) OMB control number; (3) summary of the information collection activity; (4) description of affected public; (5) estimate of total annual reporting and recordkeeping burden; and (6) frequency of collection. PHMSA will request a three-year term of approval for each information collection activity and, when approved by OMB, publish a notice of the approval in the Federal Register.
PHMSA requests comments on the following information collections:
Title: Testing, Inspection, and Marking Requirements for Cylinders.
OMB Control Number: 2137-0022.
Summary: Requirements in § 173.301 for qualification, maintenance, and use of cylinders require that cylinders be periodically inspected and retested to ensure continuing compliance with packaging standards. Information collection requirements address registration of retesters and marking of cylinders by retesters with their identification number and retest date following the completion of required tests. Records showing the results of inspections and retests must be kept by the cylinder owner or designated agent until expiration of the retest period or until the cylinder is re-inspected or retested, whichever occurs first. These requirements are intended to ensure that retesters have the qualifications to perform tests and to identify to cylinder fillers and users that cylinders are qualified for continuing use. Information collection requirements in § 173.303 require that fillers of acetylene cylinders keep, for at least 30 days, a daily record of the representative pressure to which cylinders are filled.
Affected Public: Fillers, owners, users and retesters of reusable cylinders.
Number of Respondents: 139,352.
Total Annual Responses: 153,287.
Total Annual Burden Hours: 171,642.
Frequency of collection: On occasion.
Title: (Rail Carriers and Tank Car Tank Requirements) Requirements for Rail Tank Car Tanks—Transportation of Hazardous Materials by Rail.
OMB Control Number: 2137-0559.
Summary: This information collection consolidates and describes the information provisions in parts 172, 173, 174, 179, and 180 of the HMR on the transportation of hazardous materials by rail and the manufacture, qualification, maintenance, and use of tank cars. The types of information collected include:
(1) Approvals of the Association of American Railroads (AAR) Tank Car committee: An approval is required from the AAR Tank Car Committee for a tank car to be used for a commodity other than those specified in part 173 and on the certificate of construction. This information is used to ascertain whether a commodity is suitable for transportation in a tank car. AAR approval is also required for an application for approval of designs, materials and construction, conversion or alteration of tank car tanks constructed to a specification in part 179, or an application for construction of tank cars to any new specification. This information is used to ensure that the design, construction, or modification of a tank car or the construction of a tank car to a new specification is performed in accordance with the applicable requirements.
(2) Progress Reports: Each owner of a tank car that is required to be modified to meet certain requirements specified in § 173.31 must submit a progress report to the Federal Railroad Administration (FRA). This information is used by FRA to ensure that all affected tank cars are modified before the regulatory compliance date.
(3) FRA Approvals: An approval is required from FRA to transport a bulk packaging (such as a portable tank, IM portable tank, intermediate bulk container, cargo tank, or multi-unit tank car tank) containing a hazardous material in container-on-flat-car or trailer-on-flat-car service other than as authorized by § 174.63. FRA uses this information to ensure that the bulk package is properly secured using an adequate restraint system during transportation. An FRA approval is also required for the movement of any tank car that does not conform to the applicable requirements in the HMR. These latter movements are currently being reported under the information collection for special permit applications.
(4) Manufacturer Reports and Certificate of Construction: These documents are prepared by tank car manufacturers and used by owners, users, and FRA personnel to verify that Start Printed Page 69992rail tank cars conform to the applicable specification.
(5) Quality Assurance Program: Facilities that build, repair, and ensure the structural integrity of tank cars are required to develop and implement a quality assurance program. This information is used by the facility and DOT compliance personnel to ensure that each tank car is constructed or repaired in accordance with the applicable requirements.
(6) Inspection Reports: A written report must be prepared and retained for each tank car that is inspected and tested in accordance with § 180.509 of the HMR. Rail carriers, users, and the FRA use this information to ensure that rail tank cars are properly maintained and are in safe condition for transporting hazardous materials.
Affected Public: Manufacturers, owners, and rail carriers of tank cars.
Annual Reporting and Recordkeeping Burden:
Number of Respondents: 266.
Total Annual Responses: 16,782.
Total Annual Burden Hours: 2,689.
Frequency of Collection: Annually.
Title: Testing Requirements for Non-bulk Packaging.
OMB Control Number: 2137-0572.
Summary: This information collection consolidates and describes the information provisions in parts 173 and 180 of the HMR on the testing requirements for non-bulk packagings. This OMB control number covers performance-oriented packaging standards and allows packaging manufacturers and shippers more flexibility in selecting more economical packagings for their products. This information collection also allows customizing the design of packagings to better suit the transportation environment that they will encounter and encourage technological innovations, decrease packaging costs, and significantly reduce the need for special permits.
Affected Public: Each non-bulk packaging manufacturer that tests packagings to ensure compliance with the HMR.
Annual Reporting and Recordkeeping Burden:
Number of Respondents: 5,000.
Total Annual Responses: 15,500.
Total Annual Burden Hours: 32,500.
Frequency of Collection: On occasion.Start Signature
William S. Schoonover,
Deputy Associate Administrator, Pipeline and Hazardous Materials Safety Administration.
[FR Doc. 2014-27688 Filed 11-21-14; 8:45 am]
BILLING CODE 4910-60-P