Skip to Content

Notice

Standard Review Plan for Conventional Uranium Mills and Heap Leach Facilities

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Nuclear Regulatory Commission.

ACTION:

Draft NUREG; request for comment.

SUMMARY:

The U.S. Nuclear Regulatory Commission (NRC) is issuing for public comment a draft NUREG, NUREG-2126, “Standard Review Plan for Conventional Uranium Mills and Heap Leach Facilities.” The NRC has developed draft NUREG-2126 to provide guidance for NRC staff reviews of applications to develop and operate conventional uranium mills and heap leach facilities and to ensure a consistent quality and uniformity of staff reviews.

DATES:

Submit comments by March 18, 2015. Comments received after this date Start Printed Page 75598will be considered if it is practical to do so, but the Commission is able to ensure consideration only for comments received on or before this date.

ADDRESSES:

You may submit comments by any of the following methods (unless this document describes a different method for submitting comments on a specific subject):

  • Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2014-0178. Address questions about NRC dockets to Carol Gallagher; telephone: 301-287-3422; email: Carol.Gallagher@nrc.gov. For technical questions, contact the individual listed in the FOR FURTHER INFORMATION CONTACT section of this document.
  • Mail comments to: Cindy Bladey, Office of Administration, Mail Stop: 3WFN-06-A44M, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001.

For additional direction on obtaining information and submitting comments, see “Obtaining Information and Submitting Comments” in the SUPPLEMENTARY INFORMATION section of this document.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Douglas T. Mandeville, Office of Nuclear Material Safety and Safeguards, telephone: 301-415-0724, email: douglas.mandeville@nrc.gov, U.S. Nuclear Regulatory Commission, Washington DC 20555-0001.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

I. Obtaining Information and Submitting Comments

A. Obtaining Information

Please refer to Docket ID NRC-2014-0178 when contacting the NRC about the availability of information for this action. You may obtain publicly-available information related to this action by any of the following methods:

  • Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2014-0178.
  • NRC's Agencywide Documents Access and Management System (ADAMS): You may obtain publicly-available documents online in the ADAMS Public Documents collection at http://www.nrc.gov/​reading-rm/​adams.html. To begin the search, select “ADAMS Public Documents” and then select “Begin Web-based ADAMS Search.” For problems with ADAMS, please contact the NRC's Public Document Room (PDR) reference staff at 1-800-397-4209, 301-415-4737, or by email to pdr.resource@nrc.gov. Draft NUREG-2126 is available in ADAMS under Accession No. ML14325A634.
  • NRC's PDR: You may examine and purchase copies of public documents at the NRC's PDR, Room O1-F21, One White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852.

B. Submitting Comments

Please include Docket ID NRC-2014-0178 in the subject line of your comment submission.

The NRC cautions you not to include identifying or contact information that you do not want to be publicly disclosed in your comment submission. The NRC posts all comment submissions at http://www.regulations.gov as well as entering the comment submissions into ADAMS. The NRC does not routinely edit comment submissions to remove identifying or contact information.

If you are requesting or aggregating comments from other persons for submission to the NRC, then you should inform those persons not to include identifying or contact information that they do not want to be publicly disclosed in their comment submission. Your request should state that the NRC does not routinely edit comment submissions to remove such information before making the comment submissions available to the public or entering the comment submissions into ADAMS.

II. Discussion

Under the provisions of part 40 of Title 10 of the Code of Federal Regulations, “Domestic Licensing of Source Material,” an NRC materials license is required to conduct uranium recovery by conventional mill or heap leach techniques. Applicants for a new license and operators seeking an amendment or renewal of an existing license are required to provide detailed information on the facilities, equipment, and procedures used in the proposed activities. This information is used by the NRC staff to determine whether the proposed activities will be protective of public health and safety and the environment. Each section in the Draft NUREG-2126 provides guidance on what information is to be reviewed, the basis for the review, how the NRC staff review is to be accomplished, what the staff will find acceptable in a demonstration of compliance with applicable regulations, and the evaluation criteria for determining compliance with the applicable regulations. Draft NUREG-2126 is intended to improve the understanding of the NRC staff's review process by interested members of the public and the uranium recovery industry. Any interested party may submit comments on draft NUREG-2126 for consideration by the NRC staff.

Start Signature

Dated at Rockville, Maryland, this 8 th day of December 2014.

For the Nuclear Regulatory Commission.

Andrew Persinko,

Deputy Director, Division of Decommissioning, Uranium Recovery and Waste Programs, Office of Nuclear Material Safety and Safeguards.

End Signature End Supplemental Information

[FR Doc. 2014-29663 Filed 12-17-14; 8:45 am]

BILLING CODE 7590-01-P