Food and Drug Administration, HHS.
The Food and Drug Administration (FDA) is announcing an opportunity for public comment on the proposed collection of certain information by the Agency. Under the Paperwork Reduction Act of 1995 (the PRA), Federal Agencies are required to publish notice in the Federal Register concerning each proposed collection of information, including each proposed extension of an existing collection of information, and to allow 60 days for public comment in response to the notice. This notice solicits comments on the collection of information concerning class II special controls for an automated blood cell separator device operating by centrifugal or filtration separation principle.
Submit either electronic or written comments on the collection of information by March 30, 2015.
Submit electronic comments on the collection of information to http://www.regulations.gov. Submit written comments on the collection of information to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852. All comments should be identified with the docket number found in brackets in the heading of this document.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
FDA PRA Staff, Office of Operations, Food and Drug Administration, 8455 Colesville Rd., COLE-14526, Silver Springs, MD 20993-0002, PRAStaff@fda.hhs.gov.
End Further Info
Start Supplemental Information
Under the PRA (44 U.S.C. 3501-3520), Federal Agencies must obtain approval from the Office of Management and Budget (OMB) for each collection of information they conduct or sponsor. “Collection of information” is defined in 44 U.S.C. 3502(3) and 5 CFR 1320.3(c) and includes Agency requests or requirements that members of the public submit reports, keep records, or provide information to a third party. Section 3506(c)(2)(A) of the PRA (44 U.S.C. 3506(c)(2)(A)) requires Federal Agencies to provide a 60-day notice in the Federal Register concerning each proposed collection of information, including each proposed extension of an existing collection of information, before submitting the collection to OMB for approval. To comply with this requirement, FDA is publishing notice of the proposed collection of information set forth in this document.
With respect to the following collection of information, FDA invites comments on these topics: (1) Whether the proposed collection of information is necessary for the proper performance of FDA's functions, including whether the information will have practical utility; (2) the accuracy of FDA's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; (3) ways to enhance the quality, utility, and clarity of the information to be collected; and (4) ways to minimize the burden of the collection of information on respondents, including through the use of automated collection techniques, when appropriate, and other forms of information technology.
Guidance for Industry and FDA Staff—Class II Special Controls Guidance Document: Automated Blood Cell Separator Device Operating by Centrifugal or Filtration Separation Principle (OMB Control Number 0910-0594)—Extension
Under the Safe Medical Devices Act of 1990 (Pub. L. 101-629), FDA may Start Printed Page 4928establish special controls, including performance standards, postmarket surveillance, patient registries, guidelines, and other appropriate actions it believes necessary to provide reasonable assurance of the safety and effectiveness of the device. The special control guidance serves to support the reclassification from class III to class II of the automated blood cell separator device operating on a centrifugal separation principle intended for the routine collection of blood and blood components as well as the special control for the automated blood cell separator device operating on a filtration separation principle intended for the routine collection of blood and blood components reclassified as class II (§ 864.9245 (21 CFR 864.9245)).
For currently marketed products not approved under the premarket approval process, the manufacturer should file with FDA, for 3 consecutive years, an annual report on the anniversary date of the device reclassification from class III to class II or on the anniversary date of the 510(k) of the Federal Food, Drug, and Cosmetic Act (the FD&C Act) (21 U.S.C. 360) clearance. Any subsequent change to the device requiring the submission of a premarket notification in accordance with section 510(k) of the FD&C Act should be included in the annual report. Also, a manufacturer of a device determined to be substantially equivalent to the centrifugal or filtration-based automated cell separator device intended for the routine collection of blood and blood components should comply with the same general and special controls.
The annual report should include, at a minimum, a summary of anticipated and unanticipated adverse events that have occurred and that are not required to be reported by manufacturers under Medical Device Reporting (MDR) (part 803 (21 CFR part 803)). The reporting of adverse device events summarized in an annual report will alert FDA to trends or clusters of events that might be a safety issue otherwise unreported under the MDR regulation.
Reclassification of this device from class III to class II for the intended use of routine collection of blood and blood components relieves manufacturers of the burden of complying with the premarket approval requirements of section 515 of the FD&C Act (21 U.S.C. 360e), and may permit small potential competitors to enter the marketplace by reducing the burden. Although the special control guidance recommends that manufacturers of these devices file with FDA an annual report for 3 consecutive years, this would be less burdensome than the current postapproval requirements under part 814, subpart E (21 CFR part 814, subpart E), including the submission of periodic reports under § 814.84.
Collecting or transfusing facilities and manufacturers have certain responsibilities under Federal regulations. For example, collecting or transfusing facilities are required to maintain records of any reports of complaints of adverse reactions (21 CFR 606.170), while the manufacturer is responsible for conducting an investigation of each event that is reasonably known to the manufacturer and evaluating the cause of the event (§ 803.50(b)). In addition, manufacturers of medical devices are required to submit to FDA individual adverse event reports of death, serious injury, and malfunctions (§ 803.50).
In the special control guidance document, FDA recommends that manufacturers include in their three annual reports a summary of adverse reactions maintained by the collecting or transfusing facility, or similar reports of adverse events collected, in addition to those required under the MDR regulation. The MedWatch medical device reporting code instructions (http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/ucm106737.htm) contains a comprehensive list of adverse events associated with device use, including most of those events that we recommend summarizing in the annual report.
FDA estimates the burden of this collection of information as follows:
Table 1—Estimated Annual Reporting Burden 1
|Reporting activity||Number of respondents||Number of responses per respondent||Total annual responses||Average burden per
|1 There are no capital costs or operating and maintenance costs associated with this collection of information.|
Based on FDA records, there are approximately four manufacturers of automated blood cell separator devices. The estimated average burden per response is based on the time that the manufacturers will spend preparing and submitting the annual report.
Other burden hours required for § 864.9245 are reported and approved under OMB control number 0910-0120 (premarket notification submission 501(k), 21 CFR part 807, subpart E), and OMB control number 0910-0437 (MDR, part 803).
End Supplemental Information
Dated: January 23, 2015.
Associate Commissioner for Policy.
[FR Doc. 2015-01626 Filed 1-28-15; 8:45 am]
BILLING CODE 4164-01-P