This PDF is the current document as it appeared on Public Inspection on 04/21/2015 at 08:45 am.
The Department of Commerce will submit to the Office of Management and Budget (OMB) for clearance the following proposal for collection of information under the provisions of the Paperwork Reduction Act (44 U.S.C. Chapter 35).
Agency: National Oceanic and Atmospheric Administration (NOAA).
Title: Atlantic Highly Migratory Species Vessel and Gear Marking.
OMB Control Number: 0648-0373.
Form Number(s): None.
Type of Request: Regular (extension of a currently approved information collection).
Number of Respondents: 6,857.
Average Hours Per Response: Vessel marking, 45 minutes; gear marking, 15 minutes.
Burden Hours: 6,976.
Needs and Uses: This request is for an extension of a current information collection. These requirements apply to vessel owners in the Atlantic HMS Fishery.
Under current regulations at 50 CFR 635.6, fishing vessels permitted for Atlantic Highly Migratory Species must display their official vessel numbers on their vessels. Flotation devices and high-flyers attached to certain fishing gears must also be marked with the vessel's number to identify the vessel to which the gear belongs. These requirements are necessary for identification, law enforcement, and monitoring purposes.Start Printed Page 22503
Specifically, all vessel owners that hold a valid HMS permit under 50 CFR 635.4, other than an HMS Angling permit, are required to display their vessel identification number. Numbers must be permanently affixed to, or painted on, the port and starboard sides of the deckhouse or hull and on an appropriate weather deck, so as to be clearly visible from an enforcement vessel or aircraft. In block Arabic numerals permanently affixed to or painted on the vessel in contrasting color to the background. At least 18 inches (45.7 cm) in height for vessels over 65 ft (19.8 m) in length; at least 10 inches (25.4 cm) in height for all other vessels over 25 ft (7.6 m) in length; and at least 3 inches (7.6 cm) in height for vessels 25 ft (7.6 m) in length or less.
Furthermore, the owner or operator of a vessel for which a permit has been issued under § 635.4 and that uses handline, buoy gear, harpoon, longline, or gillnet, must display the vessel's name, registration number or Atlantic Tunas, HMS Angling, or HMS Charter/Headboat permit number on each float attached to a handline, buoy gear, or harpoon, and on the terminal floats and high-flyers (if applicable) on a longline or gillnet used by the vessel. The vessel's name or number must be at least 1 inch (2.5 cm) in height in block letters or arabic numerals in a color that contrasts with the background color of the float or high-flyer.
Affected Public: Business or other for-profit organizations; individuals or households.
Respondent's Obligation: Required to obtain or retain benefits.
This information collection request may be viewed at reginfo.gov. Follow the instructions to view Department of Commerce collections currently under review by OMB.
Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to OIRA_Submission@omb.eop.gov or fax to (202) 395-5806.Start Signature
NOAA PRA Clearance Officer.
[FR Doc. 2015-09249 Filed 4-21-15; 8:45 am]
BILLING CODE P