Skip to Content

Proposed Rule

Energy Conservation Program: Test Procedure for Pumps; Correction

Document Details

Information about this document as published in the Federal Register.

Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble Start Printed Page 22939

AGENCY:

Office of Energy Efficiency and Renewable Energy, Department of Energy.

ACTION:

Notice of proposed rulemaking and public meeting; correction.

SUMMARY:

On April 1, 2015, the U.S. Department of Energy (DOE) published in the Federal Register a notice of proposed rulemaking and public meeting for Energy Conservation Program: Test Procedure for Pumps. This document corrects terms in four equations.

DATES:

April 24, 2015.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE-5B, 1000 Independence Avenue SW., Washington, DC 20585-0121. Telephone: (202) 586-6590. Email: ashley.armstrong@ee.doe.gov.

Corrections

In the Federal Register published on April 1, 2015, in FR Doc. 2015-06945, make the following corrections:

1. On page 17604: Equation (6) is corrected by removing “13.46” and adding in its place “17.80”. The corrected equation reads as follows:

Appendix A to Subpart Y of Part 431—Uniform Test Method for the Measurement of Energy Consumption of Pumps. [Corrected]

2. On page 17645: The equation in section II.B.1.1.1 is corrected by removing “13.46” and adding in its place “17.80”. The corrected equation reads as follows:

ηpump,STD = −0.85 * In(Q100%%)2 − 0.38 * In(NS) * In(Q100%%) − 11.48 * In(NS)2 + 17.80 * In(Q100%%) + 179.80 * In(NS) − (C − 555.6)

3. On page 17646: The equation in section III.D.1.2.1 is corrected by removing “MotorH” and adding in its place “MotorHP”. The corrected equation reads as follows:

4. On page 17648: The equation in section V.D.1.2.1 is corrected by removing “MotorHPMotorH” and adding in its place “MotorHP”. The corrected equation reads as follows:

Start Signature

Issued in Washington, DC, on April 20, 2015.

Kathleen B. Hogan,

Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and Renewable Energy.

End Signature End Further Info End Preamble

[FR Doc. 2015-09566 Filed 4-23-15; 8:45 am]

BILLING CODE 6450-01-P