Skip to Content

Notice

Wooden Bedroom Furniture From the People's Republic of China: Notice of Initiation of Changed Circumstances Review, and Consideration of Revocation of the Antidumping Duty Order in Part

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

Based on a request from Olollo, Inc., (“Olollo”) the Department of Commerce (the “Department”) is initiating a changed circumstances review to consider the possible revocation, in part, of the antidumping duty (“AD”) order on wooden bedroom furniture from the People's Republic of China (“PRC”) with respect to certain bed bases.

DATES:

Effective Date: June 1, 2015.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Howard Smith or Valerie Ellis, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-5193 or (202) 482-4551, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Background

On January 4, 2005, the Department published the Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Wooden Bedroom Furniture From the People's Republic of China, 70 FR 329 (January 4, 2005). On April 10, 2015, Olollo, an importer of the subject merchandise, requested revocation, in part, of the AD order pursuant to section 751(b)(1) of the Tariff Act of 1930, as amended (“the Act”) and 19 CFR 351.216(b), with respect to bed bases consisting of: (1) A wooden box frame, (2) three wooden cross beams and one perpendicular center wooden support beam, and (3) wooden slats over the beams. These bed bases are constructed without inner springs and/or coils and do not include a headboard, footboard, side rails, or mattress. The bed bases are imported unassembled. On April 27, 2015, the American Furniture Manufacturers Committee for Legal Trade and Vaughan-Bassett Furniture Company, Inc. (collectively, “Petitioners”) stated that they agree with the scope exclusion language proposed by Olollo for certain bed bases.[1]

Scope of the Order

The product covered by the order is wooden bedroom furniture. Wooden bedroom furniture is generally, but not exclusively, designed, manufactured, and offered for sale in coordinated groups, or bedrooms, in which all of the individual pieces are of approximately the same style and approximately the same material and/or finish. The subject merchandise is made substantially of wood products, including both solid wood and also engineered wood products made from wood particles, fibers, or other wooden materials such as plywood, strand board, particle board, and fiberboard, with or without wood veneers, wood overlays, or laminates, with or without non-wood components or trim such as metal, marble, leather, glass, plastic, or other resins, and whether or not assembled, completed, or finished.

The subject merchandise includes the following items: (1) Wooden beds such as loft beds, bunk beds, and other beds; (2) wooden headboards for beds (whether stand-alone or attached to side rails), wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds; (3) night tables, night stands, dressers, commodes, bureaus, mule chests, gentlemen's chests, bachelor's chests, lingerie chests, wardrobes, vanities, chessers, chifforobes, and wardrobe-type cabinets; (4) dressers with framed glass mirrors that are attached to, incorporated in, sit on, or hang over the dresser; (5) chests-Start Printed Page 31015on-chests,[2] highboys,[3] lowboys,[4] chests of drawers,[5] chests,[6] door chests,[7] chiffoniers,[8] hutches,[9] and armoires; [10] (6) desks, computer stands, filing cabinets, book cases, or writing tables that are attached to or incorporated in the subject merchandise; and (7) other bedroom furniture consistent with the above list.

The scope of the order excludes the following items: (1) Seats, chairs, benches, couches, sofas, sofa beds, stools, and other seating furniture; (2) mattresses, mattress supports (including box springs), infant cribs, water beds, and futon frames; (3) office furniture, such as desks, stand-up desks, computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs, servers, sideboards, buffets, corner cabinets, china cabinets, and china hutches; (5) other non-bedroom furniture, such as television cabinets, cocktail tables, end tables, occasional tables, wall systems, book cases, and entertainment systems; (6) bedroom furniture made primarily of wicker, cane, osier, bamboo or rattan; (7) side rails for beds made of metal if sold separately from the headboard and footboard; (8) bedroom furniture in which bentwood parts predominate; [11] (9) jewelry armories; [12] (10) cheval mirrors; [13] (11) certain metal parts; [14] (12) mirrors that do not attach to, incorporate in, sit on, or hang over a dresser if they are not designed and marketed to be sold in conjunction with a dresser as part of a dresser-mirror set; (13) upholstered beds; [15] (14) toy boxes; [16] (15) enclosable wall bed units; [17] and (16) shoe cabinets.[18] Imports of subject merchandise are classified under subheadings 9403.50.9042 and 9403.50.9045 of the HTSUS as “wooden . . . beds” and under subheading 9403.50.9080 of the HTSUS as “other . . . wooden furniture of a kind used in the bedroom.” In addition, wooden headboards for beds, wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds may also be entered under subheading 9403.50.9042 or 9403.50.9045 of the HTSUS as “parts of wood.” Subject merchandise may also be entered under subheadings 9403.50.9041, 9403.60.8081, or 9403.20.0018, or 9403.90.8041. Further, framed glass mirrors may be entered under subheading 7009.92.1000 or 7009.92.5000 of the HTSUS as “glass mirrors . . . framed.” The order covers all wooden bedroom furniture meeting Start Printed Page 31016the above description, regardless of tariff classification. Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the scope of this proceeding is dispositive.

Initiation of Changed Circumstances Review, and Consideration of Revocation of the Order in Part

Pursuant to section 751(b) of the Act, the Department will conduct a changed circumstances review upon receipt of a request from an interested party [19] which shows changed circumstances sufficient to warrant a review of an order.[20] Based on the information provided by Olollo, the Department has determined that there exist changed circumstances sufficient to warrant a changed circumstances review of the AD order on wooden bedroom furniture from the PRC.[21]

Section 782(h)(2) of the Act and 19 CFR 351.222(g)(1)(i) provide that the Department may revoke an order (in whole or in part) if it determines that producers accounting for substantially all of the production of the domestic like product have expressed a lack of interest in the order, in whole or in part. In addition, in the event the Department determines that expedited action is warranted, 19 CFR 351.221(c)(3)(ii) permits the Department to combine the notices of initiation and preliminary results. In its administrative practice, the Department has interpreted “substantially all” to mean producers accounting for at least 85 percent of the total U.S. production of the domestic like product covered by the order.[22] Petitioners state that they agree with the exclusion request, however, because Petitioners did not indicate whether they account for substantially all of the domestic production of wooden bedroom furniture, we are providing interested parties with the opportunity to address the issue of domestic industry support with respect to this proposed partial revocation of the order, and we are not combining this notice of initiation with a preliminary determination pursuant to 19 CFR 351.221(c)(3)(ii). As explained below, this notice of initiation will afford all interested parties an opportunity to address the proposed partial revocation.

Public Comment

Interested parties are invited to provide comments and/or factual information regarding this changed circumstances review, including comments concerning industry support. Comments and factual information may be submitted to the Department no later than 14 days after the date of publication of this notice. Rebuttal comments and rebuttal factual information may be filed with the Department no later than 10 days after the comments and/or factual information are filed.[23] All submissions must be filed electronically using Enforcement and Compliance's AD and CVD Centralized Electronic Service System (ACCESS).[24] An electronically filed document must be received successfully in its entirety by ACCESS, by 5 p.m. Eastern Time on the due dates set forth in this notice.

The Department will issue the preliminary results of this changed circumstances review, in accordance with 19 CFR 351.221(c)(3), which will set forth the factual and legal conclusions upon which the preliminary results are based, and a description of any action proposed because of those results. Pursuant to 19 CFR 351.221(b)(4)(ii), interested parties will have an opportunity to comment on the preliminary results of the review. In accordance with 19 CFR 351.216(e), the Department will issue the final results of its AD changed circumstance review within 270 days after the date on which the review is initiated.

This initiation is published in accordance with section 751(b)(1) of the Act and 19 CFR 351.221(b)(1).

Start Signature

Dated: May 22, 2015.

Christian Marsh,

Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations.

End Signature End Supplemental Information

Footnotes

1.  See April 27, 2015 letter from Petitioners Re: Wooden Bedroom Furniture From The People's Republic of China/Petitioners' Response to Olollo's Letter of April 10, 2015.

Back to Citation

2.  A chest-on-chest is typically a tall chest-of-drawers in two or more sections (or appearing to be in two or more sections), with one or two sections mounted (or appearing to be mounted) on a slightly larger chest; also known as a tallboy.

Back to Citation

3.  A highboy is typically a tall chest of drawers usually composed of a base and a top section with drawers, and supported on four legs or a small chest (often 15 inches or more in height).

Back to Citation

4.  A lowboy is typically a short chest of drawers, not more than four feet high, normally set on short legs.

Back to Citation

5.  A chest of drawers is typically a case containing drawers for storing clothing.

Back to Citation

6.  A chest is typically a case piece taller than it is wide featuring a series of drawers and with or without one or more doors for storing clothing. The piece can either include drawers or be designed as a large box incorporating a lid.

Back to Citation

7.  A door chest is typically a chest with hinged doors to store clothing, whether or not containing drawers. The piece may also include shelves for televisions and other entertainment electronics.

Back to Citation

8.  A chiffonier is typically a tall and narrow chest of drawers normally used for storing undergarments and lingerie, often with mirror(s) attached.

Back to Citation

9.  A hutch is typically an open case of furniture with shelves that typically sits on another piece of furniture and provides storage for clothes.

Back to Citation

10.  An armoire is typically a tall cabinet or wardrobe (typically 50 inches or taller), with doors, and with one or more drawers (either exterior below or above the doors or interior behind the doors), shelves, and/or garment rods or other apparatus for storing clothes. Bedroom armoires may also be used to hold television receivers and/or other audio-visual entertainment systems.

Back to Citation

11.  As used herein, bentwood means solid wood made pliable. Bentwood is wood that is brought to a curved shape by bending it while made pliable with moist heat or other agency and then set by cooling or drying. See CBP's Headquarters Ruling Letter 043859, dated May 17, 1976.

Back to Citation

12.  Any armoire, cabinet or other accent item for the purpose of storing jewelry, not to exceed 24 inches in width, 18 inches in depth, and 49 inches in height, including a minimum of 5 lined drawers lined with felt or felt-like material, at least one side door (whether or not the door is lined with felt or felt-like material), with necklace hangers, and a flip-top lid with inset mirror. See Issues and Decision Memorandum from Laurel LaCivita to Laurie Parkhill, Office Director, concerning “Jewelry Armoires and Cheval Mirrors in the Antidumping Duty Investigation of Wooden Bedroom Furniture from the People's Republic of China,” dated August 31, 2004. See also Wooden Bedroom Furniture F rom the People' s Republic of China: Final Changed Circumstances Review, and Determination To Revo ke Order in Part, 71 FR 38621 (July 7, 2006).

Back to Citation

13.  Cheval mirrors are any framed, tiltable mirror with a height in excess of 50 inches that is mounted on a floor-standing, hinged base. Additionally, the scope of the order excludes combination cheval mirror/jewelry cabinets. The excluded merchandise is an integrated piece consisting of a cheval mirror, i.e., a framed tiltable mirror with a height in excess of 50 inches, mounted on a floor-standing, hinged base, the cheval mirror serving as a door to a cabinet back that is integral to the structure of the mirror and which constitutes a jewelry cabinet line with fabric, having necklace and bracelet hooks, mountings for rings and shelves, with or without a working lock and key to secure the contents of the jewelry cabinet back to the cheval mirror, and no drawers anywhere on the integrated piece. The fully assembled piece must be at least 50 inches in height, 14.5 inches in width, and 3 inches in depth. See Wooden Bedroom Furniture From the People' s Republic of China: Final Changed Circumstances Review and Determination T o Revoke Order in Part, 72 FR 948 (January 9, 2007).

Back to Citation

14.  Metal furniture parts and unfinished furniture parts made of wood products (as defined above) that are not otherwise specifically named in this scope (i.e., wooden headboards for beds, wooden footboards for beds, wooden side rails for beds, and wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such parts are usually classified under HTSUS subheadings 9403.90.7005, 9403.90.7010, or 9403.90.7080.

Back to Citation

15.  Upholstered beds that are completely upholstered, i.e., containing filling material and completely covered in sewn genuine leather, synthetic leather, or natural or synthetic decorative fabric. To be excluded, the entire bed (headboards, footboards, and side rails) must be upholstered except for bed feet, which may be of wood, metal, or any other material and which are no more than nine inches in height from the floor. See Wooden Bedroom Furniture from the People' s Republic of China: Final Results of Changed Circumstances Review and Determination to Revoke Order in Part, 72 FR 7013 (February 14, 2007).

Back to Citation

16.  To be excluded the toy box must: (1) Be wider than it is tall; (2) have dimensions within 16 inches to 27 inches in height, 15 inches to 18 inches in depth, and 21 inches to 30 inches in width; (3) have a hinged lid that encompasses the entire top of the box; (4) not incorporate any doors or drawers; (5) have slow-closing safety hinges; (6) have air vents; (7) have no locking mechanism; and (8) comply with American Society for Testing and Materials (“ASTM”) standard F963-03. Toy boxes are boxes generally designed for the purpose of storing children's items such as toys, books, and playthings. See Wooden Bedroom Furniture from the People's Republic of China: Final Results of Changed Circumstances Review and Determination to Revoke Order in Part, 74 FR 8506 (February 25, 2009). Further, as determined in the scope ruling memorandum “Wooden Bedroom Furniture from the People's Republic of China: Scope Ruling on a White Toy Box,” dated July 6, 2009, the dimensional ranges used to identify the toy boxes that are excluded from the wooden bedroom furniture order apply to the box itself rather than the lid.

Back to Citation

17.  Enclosable wall bed units, also referred to as murphy beds, are composed of the following three major sections: (1) A metal wall frame, which attaches to the wall and uses coils or pistons to support the metal mattress frame; (2) a metal frame, which has euro slats for supporting a mattress and two legs that pivot; and (3) wood panels, which attach to the metal wall frame and/or the metal mattress frame to form a cabinet to enclose the wall bed when not in use. Excluded enclosable wall bed units are imported in ready-to-assemble format with all parts necessary for assembly. Enclosable wall bed units do not include a mattress. Wood panels of enclosable wall bed units, when imported separately, remain subject to the order. See Wooden Bedroom Furniture From the People's Republic of China: Final Results of Changed Circumstances Review, and Revocation of Antidumping Duty Order, in Part, 79 FR 64569 (October 30, 2014).

Back to Citation

18.  Excluded shoe cabinets are 31.5-33.5 inches wide by 15.5-17.5 inches deep by 34.5-36.5 inches high. They are designed strictly to store shoes, which are intended to be aligned in rows perpendicular to the wall along which the cabinet is positioned. Shoe cabinets do not have drawers, rods, or other indicia for the storage of clothing other than shoes. The cabinets are not designed, manufactured, or offered for sale in coordinated groups or sets and are made substantially of wood, have two to four shelves inside them, and are covered by doors. The doors often have blinds that are designed to allow air circulation and release of bad odors. The doors themselves may be made of wood or glass. The depth of the shelves does not exceed 14 inches. Each shoe cabinet has doors, adjustable shelving, and ventilation holes. See Wooden Bedroom Furniture From the People's Republic of China: Final Results of Changed Circumstances Review, and Revocation of Antidumping Duty Order, in Part, 80 FR 18383 (April 6, 2015).

Back to Citation

19.  Olollo stated in its April 29, 2015 entry of appearance that it is an importer of subject merchandise and as such is an interested party pursuant to 19 CFR 351.102(a)(29)(ii).

Back to Citation

21.  See section 751(b) of the Act and 19 CFR 351.216(d).

Back to Citation

22.  See, e.g., Certain Cased Pencils From the People's Republic of China: Initiation and Preliminary Results of Antidumping Duty Changed Circumstances Review, and Intent To Revoke Order in Part, 77 FR 42276 (July 18, 2012) (Pencils), unchanged in Certain Cased Pencils From the People's Republic of China: Final Results of Antidumping Duty Changed Circumstances Review, and Determination To Revoke Order, in Part, 77 FR 53176 (August 31, 2012).

Back to Citation

24.  See, generally, 19 CFR 351.303.

Back to Citation

[FR Doc. 2015-13107 Filed 5-29-15; 8:45 am]

BILLING CODE 3510-DS-P