Skip to Content

We invite you to try out our new beta eCFR site at https://ecfr.federalregister.gov. We’ve made big changes to make the eCFR easier to use. Be sure to leave feedback using the 'Feedback' button on the bottom right of each page!

Rule

Energy Conservation Program: Test Procedure for Battery Chargers

This document is a correction of a document that was published on 05/20/2016. View Uncorrected Document

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Enhanced Content

Relevant information about this document from Regulations.gov provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

In rule document 2016-11486, beginning on page 31827 in the issue of Friday, May 20, 2016, make the following corrections:

Appendix Y to Subpart B of Part 430 [Corrected]

1. On page 31844, in Appendix Y to Subpart B of Part 430, in Table 5.3, under the “Product Class” column head, in the “Rated Battery Energy (Ebatt) ** column, in the third row, the entry should read “<100 Wh”.

2. On the same page, in the same table, beneath the same column head, in the same column, in the fourth row, the entry should read “<100 Wh”.

3. On the same page, in the same table, beneath the same column head, in the same column, in the sixth row, the entry should read “100-3000 Wh”.

End Preamble

[FR Doc. C1-2016-11486 Filed 6-28-16; 8:45 am]

BILLING CODE 1505-05-D