This PDF is the current document as it appeared on Public Inspection on 09/01/2016 at 08:45 am.
Enforcement and Compliance, International Trade Administration, Department of Commerce.
On June 13, 2016 the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on certain oil country tubular goods (OCTG) from Taiwan. The period of review (POR) is July 18, 2014, through August 31, 2015. The review covers one producer/exporter of the subject merchandise, Tension Steel Industries Co., Ltd. (Tension Steel). We invited parties to comment on the preliminarily results. None were received. Accordingly, for the final results, we continue to find that Tension Steel did not make sales of subject merchandise at less than normal value.
Effective September 2, 2016.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Thomas Schauer, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0410.End Further Info End Preamble Start Supplemental Information
On June 13, 2016, the Department published the Preliminary Results of the administrative review. The Department gave interested parties an opportunity to comment on the Preliminary Results. None were received. The Department conducted this review in accordance with section 751(a)(2) of the Tariff Act of 1930, as amended (the Act).
Scope of the Order
The merchandise covered by the order is certain OCTG, which are hollow steel products of circular cross-section, including oil well casing and tubing, of iron (other than cast iron) or steel (both carbon and alloy), whether seamless or welded, regardless of end finish (e.g., whether or not plain end, threaded, or threaded and coupled) whether or not conforming to American Petroleum Institute (API) or non-API specifications, whether finished (including limited service OCTG products) or unfinished (including green tubes and limited service OCTG products), whether or not thread protectors are attached. The scope of the order also covers OCTG coupling stock.
Excluded from the scope of the order are: Casing or tubing containing 10.5 percent or more by weight of chromium; drill pipe; unattached couplings; and unattached thread protectors.
The merchandise subject to the order is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7304.29.10.10, 7304.29.10.20, 7304.29.10.30, 7304.29.10.40, 7304.29.10.50, 7304.29.10.60, 7304.29.10.80, 7304.29.20.10, 7304.29.20.20, 7304.29.20.30, 7304.29.20.40, 7304.29.20.50, 7304.29.20.60, 7304.29.20.80, 7304.29.31.10, 7304.29.31.20, 7304.29.31.30, 7304.29.31.40, 7304.29.31.50, 7304.29.31.60, 7304.29.31.80, 7304.29.41.10, 7304.29.41.20, 7304.29.41.30, 7304.29.41.40, 7304.29.41.50, 7304.29.41.60, 7304.29.41.80, 7304.29.50.15, 7304.29.50.30, 7304.29.50.45, 7304.29.50.60, 7304.29.50.75, 7304.29.61.15, 7304.29.61.30, 7304.29.61.45, 7304.29.61.60, 7304.29.61.75, 7305.20.20.00, 7305.20.40.00, 7305.20.60.00, 7305.20.80.00, 7306.29.10.30, 7306.29.10.90, 7306.29.20.00, 7306.29.31.00, 7306.29.41.00, 7306.29.60.10, 7306.29.60.50, 7306.29.81.10, and 7306.29.81.50.
The merchandise subject to the order may also enter under the following HTSUS item numbers: 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.39.00.36, 7304.39.00.40, 7304.39.00.44, 7304.39.00.48, 7304.39.00.52, 7304.39.00.56, 7304.39.00.62, 7304.39.00.68, 7304.39.00.72, 7304.39.00.76, 7304.39.00.80, 7304.59.60.00, 7304.59.80.15, 7304.59.80.20, 7304.59.80.25, 7304.59.80.30, 7304.59.80.35, 7304.59.80.40, 7304.59.80.45, 7304.59.80.50, 7304.59.80.55, 7304.59.80.60, 7304.59.80.65, 7304.59.80.70, 7304.59.80.80, 7305.31.40.00, 7305.31.60.90, 7306.30.50.55, Start Printed Page 606727306.30.50.90, 7306.50.50.50, and 7306.50.50.70.
While the HTSUS subheadings are provided for convenience and customs purposes, the written description is dispositive.
Final Results of Review
The Department made no changes to the Preliminary Results. As a result of this review, we determine that a weighted-average dumping margin of 0.00 percent exists for Tension Steel Industries Co., Ltd. for the period July 18, 2014, through August 31, 2015.
In accordance with 19 CFR 351.212(b) and the Final Modification, the Department will instruct U.S. Customs and Border Protection (CBP) to liquidate all appropriate entries for Tension Steel without regard to antidumping duties.
For entries of subject merchandise during the POR produced by Tension Steel for which it did not know that the merchandise was destined for the United States, we will instruct CBP to liquidate un-reviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. We intend to issue instructions to CBP 15 days after publication of the final results of this review.
Cash Deposit Requirements
The following deposit requirements will be effective upon publication of the final results of administrative review for all shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for Tension Steel will be 0.00 percent, the weighted-average dumping margin established in the final results of this administrative review; (2) for merchandise exported by manufacturers or exporters not covered in this review but covered in a prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding; (3) if the exporter is not a firm covered in this review, a prior review, or the less-than-fair-value investigation but the manufacturer is, the cash deposit rate will be the rate established for the most recently completed segment of this proceeding for the manufacturer of the merchandise; (4) if neither the exporter nor the manufacturer has its own rate, the cash deposit rate will be 2.34 percent. These cash deposit requirements, when imposed, shall remain in effect until further notice.
Notification to Importers
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.
Administrative Protective Orders
This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
We are issuing and publishing these results in accordance with sections 751(a)(1) and 777(i)(1) of the Act.Start Signature
Dated: August 26, 2016.
Assistant Secretary for Enforcement and Compliance.
1. See Certain Oil Country Tubular Goods from Taiwan: Preliminary Results of Antidumping Duty Administrative Review; 2014-2015, 81 FR 38135 (June 13, 2016) (Preliminary Results).Back to Citation
2. See Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Duty Proceedings; Final Modification, 77 FR 8101, 8103 (February 14, 2012) (Final Modification).Back to Citation
3. See Certain Oil Country Tubular Goods From India, the Republic of Korea, Taiwan, the Republic of Turkey, and the Socialist Republic of Vietnam: Antidumping Duty Orders; and Certain Oil Country Tubular Goods From the Socialist Republic of Vietnam: Amended Final Determination of Sales at Less Than Fair Value, 79 FR 53691, 53693 (September 10, 2014).Back to Citation
[FR Doc. 2016-21212 Filed 9-1-16; 8:45 am]
BILLING CODE 3510-DS-P