Enforcement and Compliance, International Trade Administration, Department of Commerce.
On July 12, 2016, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on certain large diameter carbon and alloy seamless standard, line, and pressure pipe (over 41/2 inches) from Japan. The period of review (POR) is June 1, 2014, through May 31, 2015. The review covers five producers or exporters of Start Printed Page 80636subject merchandise. We invited parties to comment on the Preliminary Results. None were received. Accordingly, for the final results, we continue to find that that NKK Tubes (NKK) had no shipments during the POR. Further, we continue to find that subject merchandise has been sold in the United States at less than normal value by JFE Steel Corporation (JFE), Nippon Steel & Sumitomo Metal Corporation (NSSMC), Nippon Steel Corporation (NSC), and Sumitomo Metal Industries, Ltd. (SMI).
Effective November 16, 2016.
Start Further Info
FOR FURTHER INFORMATION CONTACT:
Peter Zukowski, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-0189.
End Further Info
Start Supplemental Information
On July 12, 2016, the Department published the Preliminary Results of the administrative review.
The Department gave interested parties an opportunity to comment on the Preliminary Results. We received no comments. The Department conducted this review in accordance with section 751(a)(2) of the Tariff Act of 1930, as amended (the Act).
Scope of the Order
The merchandise subject to the order is certain large diameter carbon and alloy seamless standard, line, and pressure pipe (over 41/2 inches) from Japan, which is currently classified under subheading 7304.10.10.30, 7304.10.10.45, 7304.10.10.60, 7304.10.50.50, 7304.19.10.30, 7304.19.10.45, 7304.19.10.60, 7304.19.50.50, 7304.31.60.10, 7304.31.60.50, 7304.39.00.04, 7304.39.00.06, 7304.39.00.08, 7304.39.00.36, 7304.39.00.40, 7304.39.00.44, 7304.39.00.48, 7304.39.00.52, 7304.39.00.56, 7304.39.00.62, 7304.39.00.68, 7304.39.00.72, 7304.51.50.15, 7304.51.50.45, 7304.51.50.60, 7304.59.20.30, 7304.59.20.55, 7304.59.20.60, 7304.59.20.70, 7304.59.60.00, 7304.59.80.30, 7304.59.80.35, 7304.59.80.40, 7304.59.80.45, 7304.59.80.50, 7304.59.80.55, 7304.59.80.60, 7304.59.80.65, and 7304.59.80.70 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to the order is dispositive.
Final Determination of No Shipments
As noted in the Preliminary Results, the Department received a claim of no shipments from NKK. In the Preliminary Results, the Department preliminarily found that NKK did not have reviewable entries during the POR. Additionally, the Department stated in the Preliminary Results that it was not appropriate to rescind the review with respect to NKK at that time, but rather complete the review with respect to NKK and issue appropriate instructions to U.S. Customs and Border Protection (CBP) based on the final results.
After issuing the Preliminary Results, the Department received no comments from interested parties, and has not received any information that would cause it to alter its preliminary determination. Therefore, for these final results, the Department continues to find that NKK did not have any reviewable entries during the POR.
Final Results of Review
Because the Department received no comments after the Preliminary Results for consideration for these final results, we have made no changes to the Preliminary Results. As a result of this review, we determine that dumping margins on certain large diameter carbon and alloy seamless standard, line, and pressure pipe (over 41/2 inches) from Japan exist for the period June 1, 2014, through May 31, 2015, at the following rates:
|Producer and/or exporter||Margin (percent)|
|JFE Steel Corporation||107.80|
|Nippon Steel & Sumitomo Metal Corporation||107.80|
|Nippon Steel Corporation||107.80|
|Sumitomo Metals Industries||107.80|
The Department has determined, and CBP shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review.
The Department intends to issue assessment instructions to CBP 15 days after the date of publication of these final results of review. We will instruct CBP to apply an ad valorem assessment rate of 107.80 percent to all entries of subject merchandise during the POR which were produced and/or exported by NSSMC, and an ad valorem assessment rate of 107.80 percent to all entries of subject merchandise during the POR which were produced and/or exported by the companies that were not selected for individual examination: JFE, NSC, and SMI.
Additionally, because the Department determined that NKK had no shipments of subject merchandise during the POR, any suspended entries that entered under NKK's AD case number (i.e., at that exporter's rate) will be liquidated at the all-others rate effective during the period of review if there is no rate for the intermediate company(ies) involved in the transaction.
Cash Deposit Requirements
The following deposit requirements will be effective upon publication of the notice of final results of administrative review for all shipments of certain large diameter carbon and alloy seamless standard, line, and pressure pipe (over 41/2 inches) from Japan entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(2) of the Act: (1) The cash deposit rates for the reviewed companies will be the rates established in the final results of this review; (2) for merchandise exported by manufacturers or exporters not covered in this review but covered in a prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding; (3) if the exporter is not a firm covered in this review, a prior review, or the less-than-fair-value investigation but the manufacturer is, the cash deposit rate will be the rate established for the most recently completed segment of this proceeding for the manufacturer of the merchandise; (4) if neither the exporter nor the manufacturer has its own rate, the cash deposit rate will continue to be Start Printed Page 8063768.88 percent, the all-others rate established in the order.
These deposit requirements, when imposed, shall remain in effect until further notice.
Notification to Importers
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.
Administrative Protective Orders
This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
We are issuing and publishing these results in accordance with sections 751(a)(1) and 777(i)(1) of the Act.
End Supplemental Information
Dated: November 9, 2016.
Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2016-27519 Filed 11-15-16; 8:45 am]
BILLING CODE 3510-DS-P