Skip to Content

Notice

Finished Carbon Steel Flanges From India: Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination

Document Details

Information about this document as published in the Federal Register.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (the Department) preliminarily determines that finished carbon steel flanges from India are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is April 1, 2015, through March 31, 2016. The estimated weighted-average dumping margins of sales at LTFV are shown in the “Preliminary Determination” section of this notice. Interested parties are invited Start Printed Page 9720to comment on this preliminary determination.

DATES:

Effective February 8, 2017.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Fred Baker or Mark Flessner, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-2924 or (202) 482-6312, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Background

The Department initiated this investigation on July 20, 2016.[1] We selected two mandatory respondents in this investigation, Norma (India) Limited and R.N. Gupta & Co., Ltd.[2] For a complete description of the events that followed the initiation of this investigation, see the memorandum that is dated concurrently with this determination and hereby adopted by this notice.[3] A list of topics in the Preliminary Decision Memorandum is included as Appendix II to this notice.

The Preliminary Decision Memorandum is a public document and is made available to the public via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov, and is available to all parties in the Department's Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly on the internet at http://enforcement.trade.gov/​frn/​. The signed Preliminary Decision Memorandum and the electronic version of the Preliminary Decision Memorandum are identical in content.

Scope of the Investigation

The product covered by this investigation is finished carbon steel flanges from India. For a full description of the scope of this investigation, see the “Scope of the Investigation,” in Appendix I of this notice.

Scope Comments

We received no comments from interested parties regarding the scope of the investigation as it appeared in the Initiation Notice. The scope published in the Initiation Notice contained several typographical errors, which have been corrected in Appendix I.

Methodology

The Department is conducting this investigation in accordance with section 731 of the Tariff Act of 1930, as amended (the Act). Export price was calculated in accordance with section 772 of the Act. Normal value (NV) was calculated in accordance with section 773 of the Act. For a full description of the methodology underlying our preliminary conclusions, see the Preliminary Decision Memorandum.

All-Others Rate

Section 733(d)(1)(A)(ii) of the Act provides that in the preliminary determination the Department shall determine an estimated “all-others” rate for all exporters and producers not individually investigated, in accordance with section 735(c)(5) of the Act. Section 735(c)(5)(A) of the Act states that generally the estimated rate for all-others shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero and de minimis margins, and any margins determined entirely under section 776 of the Act. In this investigation, we calculated weighted-average dumping margins for both mandatory respondents that are above de minimis and which are not based on section 776 of the Act. However, because there are only two weighted-average dumping margins for this preliminary determination, using a weighted-average of these two rates risks disclosure of business proprietary data. Therefore, the Department assigned a margin to the all-others rate companies based on the simple average of the two mandatory respondents' rates.[4]

Preliminary Determination

The Department preliminarily determines that finished carbon steel flanges from India are being, or are likely to be, sold in the United States at LTFV, pursuant to section 733 of the Act, and that the following estimated weighted-average dumping margins exist:

Exporter/manufacturerWeighted-average dumping margins (percent)
Norma (India) Limited/USK Exports Private Limited/Uma Shanker Khandelwal & Co./Bansidhar Chiranjilal8.58
R.N. Gupta & Co., Ltd12.56
All Others10.57

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, we will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of all entries of finished carbon steel flanges from India, as described in the Scope of the Investigation in Appendix I, that are entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register.

Pursuant to section 733(d) of the Act and 19 CFR 351.205(d), we will instruct CBP to require cash deposits [5] equal to the weighted-average amount by which the normal value exceeds U.S. price, as indicated in the chart above, as follows: (1) The rate for the mandatory respondents listed above will be the respondent-specific rates we determined in this preliminary determination; (2) if the exporter is not a mandatory respondent identified above, but the producer is, the rate will be the specific rate established for the producer of the subject merchandise; and (3) the rate for all other producers or exporters will be the all-others rate. The suspension of liquidation instructions will remain in effect until further notice.

Disclosure

We intend to disclose the calculations performed to interested parties in this proceeding within five days of the public announcement of this preliminary determination in accordance with 19 CFR 351.224(b).Start Printed Page 9721

Verification

As provided in section 782(i) of the Act, we intend to verify information relied upon in making our final determination.

Public Comment

Interested parties are invited to comment on this preliminary determination no later than 30 days after the date of publication of this preliminary determination.[6] Rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs.[7] Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this proceeding are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, and a list of the issues to be discussed. If a request for a hearing is made, the Department intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

All documents must be filed electronically using ACCESS. An electronically-filed request must be received successfully in its entirety by ACCESS by 5:00 p.m. Eastern Standard Time.

Postponement of Final Determination and Extension of Provisional Measures

Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Section 351.210(e)(2) of the Department's regulations requires that requests by respondents for postponement of a final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.

Respondents Norma and Gupta have requested that, in the event of an affirmative preliminary determination in this investigation, the Department postpone its final determination, i.e., no later than 135 days after the publication of the preliminary determination in the Federal Register, and that the Department extend the application of the provisional measures prescribed under section 733(d) of the Act and 19 CFR 351.210(e)(2), from a four-month period to a period not to exceed six months.[8]

In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) Our preliminary determination is affirmative; (2) the requesting exporters account for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, we are postponing the final determination until no later than 135 days after the publication of this notice in the Federal Register and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, we will issue our final determination no later than 135 days after the date of publication of this preliminary determination, pursuant to section 735(a)(2) of the Act.[9]

International Trade Commission (ITC) Notification

In accordance with section 733(f) of the Act, we are notifying the ITC of our affirmative preliminary determination of sales at LTFV. If our final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after our final determination whether these imports are materially injuring, or threaten material injury to, the U.S. industry.

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Start Signature

Dated: January 26, 2017.

Ronald K. Lorentzen,

Acting Assistant Secretary for Enforcement and Compliance.

End Signature

Appendix I

Scope of the Investigation

The scope of this investigation covers finished carbon steel flanges. Finished carbon steel flanges differ from unfinished carbon steel flanges (also known as carbon steel flange forgings) in that they have undergone further processing after forging, including, but not limited to, beveling, bore threading, center or step boring, face machining, taper boring, machining ends or surfaces, drilling bolt holes, and/or de-burring or shot blasting. Any one of these post-forging processes suffices to render the forging into a finished carbon steel flange for purposes of this investigation. However, mere heat treatment of a carbon steel flange forging (without any other further processing after forging) does not render the forging into a finished carbon steel flange for purposes of this investigation.

While these finished carbon steel flanges are generally manufactured to specification ASME B16.5 or ASME B16.47 series A or series B, the scope is not limited to flanges produced under those specifications. All types of finished carbon steel flanges are included in the scope regardless of pipe size (which may or may not be expressed in inches of nominal pipe size), pressure class (usually, but not necessarily, expressed in pounds of pressure, e.g., 150, 300, 400, 600, 900, 1500, 2500, etc.), type of face (e.g., flat face, full face, raised face, etc.), configuration (e.g., weld neck, slip on, socket weld, lap joint, threaded, etc.), wall thickness (usually, but not necessarily, expressed in inches), normalization, or whether or not heat treated. These carbon steel flanges either meet or exceed the requirements of the ASTM A105, ASTM A694, ASTM A181, ASTM A350 and ASTM A707 standards (or comparable foreign specifications). The scope includes any flanges produced to the above-referenced ASTM standards as currently stated or as may be amended. The term “carbon steel” under this scope is steel in which:

(a) iron predominates, by weight, over each of the other contained elements:

(b) the carbon content is 2 percent or less, by weight; and

(c) none of the elements listed below exceeds the quantity, by weight, as indicated:

(i) 0.87 percent of aluminum;

(ii) 0.0105 percent of boron;

(iii) 10.10 percent of chromium;

(iv) 1.55 percent of columbium;

(v) 3.10 percent of copper;

(vi) 0.38 percent of lead;

(vii) 3.04 percent of manganese;

(viii) 2.05 percent of molybdenum;

(ix) 20.15 percent of nickel;

(x) 1.55 percent of niobium;

(xi) 0.20 percent of nitrogen;

(xii) 0.21 percent of phosphorus;

(xiii) 3.10 percent of silicon;

(xiv) 0.21 percent of sulfur;

(xv) 1.05 percent of titanium;

(xvi) 4.06 percent of tungsten;

(xvii) 0.53 percent of vanadium; orStart Printed Page 9722

(xviii) 0.015 percent of zirconium.

Finished carbon steel flanges are currently classified under subheadings 7307.91.5010 and 7307.91.5050 of the Harmonized Tariff Schedule of the United States (HTSUS). They may also be entered under HTSUS subheadings 7307.91.5030 and 7307.91.5070. The HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

1. Summary

2. Background

3. Period of Investigation

4. Scope of the Investigation

5. Postponement of Final Determination and Extension of Provisional Measures

6. Scope Comments

7. Affiliation and Collapsing of Affiliates

8. Discussion of the Methodology

9. Product Comparisons

10. Date of Sale

11. Export Price

12. Normal Value

13. Currency Conversion

14. Conclusion

End Supplemental Information

Footnotes

1.  See Finished Carbon Steel Flanges from India, Italy, and Spain: Initiation of Less-Than-Fair-Value Investigations, 81 FR 49619 (July 28, 2016) (Initiation Notice).

Back to Citation

2.  See Memorandum from Fred Baker to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, entitled, “Respondent Selection for the Antidumping Duty Investigation of Finished Carbon Steel Flanges from India,” dated September 20, 2016 (Respondent Selection Memorandum).

Back to Citation

3.  See Memorandum from Gary Taverman, Associate Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Ronald K. Lorentzen, Acting Assistant Secretary for Enforcement and Compliance, entitled “Decision Memorandum for the Preliminary Determination in the Antidumping Duty Investigation of Finished Carbon Steel Flanges from India,” dated concurrently with this notice (Preliminary Decision Memorandum).

Back to Citation

4.  We calculated a simple average because the record does not contain usable publicly ranged data for both respondents.

Back to Citation

5.  See Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional Measures Period in Antidumping and Countervailing Duty Investigations, 76 FR 61042 (October 3, 2011).

Back to Citation

6.  See 19 CFR 351.309(c)(1)(i); see also 19 CFR 351.303 (for general filing requirements).

Back to Citation

7.  See 19 CFR 351.309(d); see also 19 CFR 351.303 (for general filing requirements).

Back to Citation

8.  See Letter from Norma to the Secretary of Commerce entitled, “Request to Postpone the Final Determination,” dated January 12, 2017; see also Letter from Gupta to the Secretary of Commerce entitled, “Request to Postpone the Final Determination,” dated January 11, 2017.

Back to Citation

9.  See 19 CFR 351.210(b)(2) and (e).

Back to Citation

[FR Doc. 2017-02607 Filed 2-7-17; 8:45 am]

BILLING CODE 3510-DS-P