This PDF is the current document as it appeared on Public Inspection on 03/13/2017 at 08:45 am.
Federal Trade Commission.
Proposed consent agreement.
The consent agreement in this matter settles alleged violations of federal law prohibiting unfair or deceptive acts or practices. The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and the terms of the consent order—embodied in the consent agreement—that would settle these allegations.
Comments must be received on or before April 7, 2017.
Interested parties may file a comment at https://ftcpublic.commentworks.com/ftc/blockdivisionconsent online or on paper, by following the instructions in the Request for Comment part of the SUPPLEMENTARY INFORMATION section below. Write “In the Matter of Block Division, Inc., File No. 172 3052” on your comment and file your comment online at https://ftcpublic.commentworks.com/ftc/blockdivisionconsent by following the instructions on the Web-based form. If you prefer to file your comment on paper, write “In the Matter of Block Division, Inc., File No. 172 3052” on your comment and on the envelope, and mail your comment to the following address: Federal Trade Commission, Office of the Secretary, 600 Pennsylvania Avenue NW., Suite CC-5610 (Annex D), Washington, DC 20580, or deliver your comment to the following address: Federal Trade Commission, Office of the Secretary, Constitution Center, 400 7th Street SW., 5th Floor, Suite 5610 (Annex D), Washington, DC 20024.Start Further Info
FOR FURTHER INFORMATION CONTACT:
Julia Solomon Ensor, Attorney, (202) 326-2377, or Crystal Ostrum, Attorney, (202) 326-3405, Bureau of Consumer Protection, Federal Trade Commission, 600 Pennsylvania Avenue NW., Washington, DC 20580.End Further Info End Preamble Start Supplemental Information
Pursuant to Section 6(f) of the Federal Trade Commission Act, 15 U.S.C. 46(f), and FTC Rule 2.34, 16 CFR 2.34, notice is hereby given that the above-captioned consent agreement containing consent order to cease and desist, having been filed with and accepted, subject to final approval, by the Commission, has been placed on the public record for a period of thirty (30) days. The following Analysis to Aid Public Comment describes the terms of the consent agreement, and the allegations in the complaint. An electronic copy of the full text of the consent agreement package can be obtained from the FTC Home Page (for March 8, 2017), on the World Wide Web at: http://www.ftc.gov/os/actions.shtm.
You can file a comment online or on paper. For the Commission to consider your comment, we must receive it on or before April 7, 2017. Write “In the Matter of Block Division, Inc., File No. 172 3052” on your comment. Your comment—including your name and your state—will be placed on the public record of this proceeding, including, to the extent practicable, on the public Commission Web site, at http://www.ftc.gov/os/publiccomments.shtm. As a matter of discretion, the Commission tries to remove individuals' home contact information from comments before placing them on the Commission Web site.
Because your comment will be made public, you are solely responsible for making sure that your comment does not include any sensitive personal information, like anyone's Social Security number, date of birth, driver's license number or other state identification number or foreign country equivalent, passport number, financial account number, or credit or debit card number. You are also solely responsible for making sure that your comment does not include any sensitive health information, like medical records or other individually identifiable health information. In addition, do not include any “[t]rade secret or any commercial or financial information which . . . is privileged or confidential,” as discussed in Section 6(f) of the FTC Act, 15 U.S.C. 46(f), and FTC Rule 4.10(a)(2), 16 CFR 4.10(a)(2). In particular, do not include competitively sensitive information such as costs, sales statistics, inventories, formulas, patterns, devices, manufacturing processes, or customer names.
If you want the Commission to give your comment confidential treatment, you must file it in paper form, with a request for confidential treatment, and you have to follow the procedure explained in FTC Rule 4.9(c), 16 CFR 4.9(c). Your comment will be kept confidential only if the FTC General Counsel, in his or her sole discretion, grants your request in accordance with the law and the public interest.
Postal mail addressed to the Commission is subject to delay due to heightened security screening. As a result, we encourage you to submit your comments online. To make sure that the Commission considers your online comment, you must file it at https://ftcpublic.commentworks.com/ftc/Start Printed Page 13605blockdivisionconsent by following the instructions on the web-based form. If this Notice appears at http://www.regulations.gov/#!home, you also may file a comment through that Web site.
If you file your comment on paper, write “In the Matter of Block Division, Inc., File No. 172 3052” on your comment and on the envelope, and mail your comment to the following address: Federal Trade Commission, Office of the Secretary, 600 Pennsylvania Avenue NW., Suite CC-5610 (Annex D), Washington, DC 20580, or deliver your comment to the following address: Federal Trade Commission, Office of the Secretary, Constitution Center, 400 7th Street SW., 5th Floor, Suite 5610 (Annex D), Washington, DC 20024. If possible, submit your paper comment to the Commission by courier or overnight service.
Analysis of Proposed Consent Order To Aid Public Comment
The Federal Trade Commission (“FTC” or “Commission”) has accepted, subject to final approval, an agreement containing a consent order from Block Division, Inc. (“respondent”).
The proposed consent order has been placed on the public record for thirty (30) days for receipt of comments by interested persons. Comments received during this period will become part of the public record. After thirty (30) days, the Commission will again review the agreement and the comments received, and will decide whether it should withdraw from the agreement or make final the agreement's proposed order.
This matter involves respondent's marketing, sale, and distribution of pulley blocks and other products with claims that the products are of U.S.-origin. According to the FTC's complaint, respondent represented that its products are “Made in USA.” In fact, respondent's products incorporate significant imported parts, including imported steel pulley plates that entered the United States from overseas already stamped “Made in USA.”
The complaint alleges that respondent's claims that its products are “Made in USA” were false or misleading, or not substantiated at the time the representations were made. Accordingly, the complaint alleges that respondent engaged in deceptive acts or practices in violation of Section 5(a) of the FTC Act.
The proposed consent order contains provisions designed to prevent respondent from engaging in similar acts and practices in the future. Consistent with the FTC's Enforcement Policy Statement on U.S. Origin Claims, Part I prohibits Block Division, Inc. from making U.S.-origin claims for its products unless either: (1) The final assembly or processing of the product occurs in the United States, all significant processing that goes into the product occurs in the United States, and all or virtually all ingredients or components of the product are made and sourced in the United States; or (2) a clear and conspicuous qualification appears immediately adjacent to the representation that accurately conveys the extent to which the product contains foreign parts, ingredients, and/or processing.
Part II prohibits respondent from making any “Made in USA” or other country-of-origin claim about a product or service unless the claim is true, not misleading, and respondent has a reasonable basis substantiating the representation.
Parts III through VI are reporting and compliance provisions. Part III requires respondent to acknowledge receipt of the order, to provide a copy of the order to certain current and future principals, officers, directors, and employees, and to obtain an acknowledgement from each such person that they have received a copy of the order. Part IV requires the filing of compliance reports within one year after the order becomes final and within 10 days of any change in respondent that would affect compliance with the order. Part V requires respondent to maintain certain records, including records necessary to demonstrate compliance with the order. Part VI requires respondent to submit additional compliance reports when requested by the Commission and to permit the Commission or its representatives to interview respondent's personnel.
Finally, Part VII is a “sunset” provision, terminating the order after twenty (20) years, with certain exceptions.
The purpose of this analysis is to aid public comment on the proposed order. It is not intended to constitute an official interpretation of the proposed order or to modify its terms in any way.Start Signature
By direction of the Commission.
Donald S. Clark,
[FR Doc. 2017-04919 Filed 3-13-17; 8:45 am]
BILLING CODE 6750-01-P