Start Preamble

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (the Department) preliminarily determines that certain hardwood plywood products (hardwood plywood) from the People's Republic of China (PRC) are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is April 1, 2016, through September 30, 2016.

DATES:

Effective June 23, 2017.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Amanda Brings or Ryan Mullen, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-3927 or (202) 482-5260, respectively.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). The Department published the notice of initiation of this investigation on December 16, 2016.^[1] On February 27, 2017, the Department postponed the preliminary determination of this investigation and the revised deadline is now June 16, 2017.^[2] For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum.^[3] A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov, and to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/​frn/​. The signed and the electronic versions of the Preliminary Decision Memorandum are identical in content.

Scope of the Investigation

The product covered by this investigation is hardwood plywood from the PRC. For a complete description of the scope of this investigation, see Appendix I.

Scope of Comments

In accordance with the preamble to the Department's regulations,^[4] the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (scope).^[5] Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. For a summary of the product coverage comments and rebuttal responses submitted to the record for this investigation, and accompanying discussion and analysis of all comments timely received, see the Department's Preliminary Scope Decision Memorandum and the Department's Additional Preliminary Scope Decision Memorandum.^[6] The Department is preliminarily modifying the scope language as it appeared in the Initiation Notice. See the revised scope in Appendix I to this notice.

Methodology

The Department is conducting this investigation in accordance with section 731 of the Act. The Department calculated export prices in accordance with section 772(a) of the Act. Because the PRC is a non-market economy, within the meaning of section 771(18) of the Act, the Department calculated normal value (NV) in accordance with section 773(c) of the Act. In addition, pursuant to sections 776(a) and (b) of the Act, the Department preliminarily relied upon facts otherwise available, with adverse inferences, for Shandong Dongfang Bayley Wood Co., Ltd. (Bayley), certain separate rate applicants, and the PRC-wide entity. As the Department preliminarily determined that Bayley is not entitled to a separate rate, the company is included within the PRC-wide entity. For a full description of the methodology underlying the Department's preliminary determination, see the Preliminary Decision Memorandum.

Preliminary Affirmative Determination of Critical Circumstances, in Part

In accordance with section 733(e) of the Act and 19 CFR 351.206, the Department preliminarily determines that critical circumstances exist with respect to imports of hardwood plywood from the PRC for certain separate rate respondents and the PRC-wide entity (of which Bayley and certain separate rate respondents are a part), but do not exist for Linyi Chengen Import and Export Co., Ltd. and certain separate rate respondents. For a full description of the methodology and results of the Department's critical circumstances analysis, see the Preliminary Decision Memorandum.Start Printed Page 28630

Combination Rates

In the Initiation Notice,^[7] the Department stated that it would calculate producer/exporter combination rates for the respondents that are eligible for a separate rate in this investigation. Policy Bulletin 05.1 describes this practice.^[8]

Preliminary Determination

The Department preliminarily determines that the following estimated weighted-average dumping margins exist:

 

Consistent with section 733(b)(3) of the Act, the Department disregards de minimis rates and preliminarily determines that the individually examined respondent with a de minimis rate has not made sales of subject merchandise at LTFV.

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, the Department will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of subject merchandise as described in the scope of the investigation section entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register, as discussed below. Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), the Department will instruct CBP to require a cash deposit equal to the weighted average amount by which normal value exceeds U.S. price, as indicated in the chart above as follows: (1) For the producer/exporter combinations listed in the table above, the cash deposit rate is equal to the estimated weighted-average dumping margin listed for that Start Printed Page 28637combination in the table; (2) for all combinations of PRC producers/exporters of merchandise under consideration that have not established eligibility for their own separate rates, the cash deposit rate will be equal to the estimated weighted-average dumping margin established for the PRC-wide entity; and (3) for all third-country exporters of merchandise under consideration not listed in the table above, the cash deposit rate is the cash deposit rate applicable to the PRC producer/exporter combination that supplied that third-country exporter.

Because the estimated weighted-average dumping margin for the Linyi Dongfangjuxin Wood Co., Ltd./Linyi Chengen Import and Export Co., Ltd. combination is zero or de minimis (i.e., less than 0.5 percent), the Department is directing CBP not to suspend liquidation of entries of subject merchandise from this producer/exporter combination. Entries of subject merchandise from this exporter supplied by any other producer, or from this producer that supplied any other exporter, or from third-country exporters that sourced from the excluded producer/exporter combination, are not entitled to this exclusion from suspension of liquidation and are subject to the provisional measures at the cash deposit rate established for the PRC-wide entity.

Should the final estimated weighted-average dumping margin be zero or de minimis for the producer/exporter combination identified above, entries of merchandise from this producer/exporter combinations will be excluded from the order. Such exclusion(s) will not be applicable to merchandise exported to the United States by any other producer/exporter combinations or by third-country exporters that sourced from the excluded producer/exporter combination.

Section 733(e)(2) of the Act provides that, given an affirmative determination of critical circumstances, any suspension of liquidation shall apply to unliquidated entries of merchandise entered, or withdrawn from warehouse, for consumption on or after the later of (a) the date which is 90 days before the date on which the suspension of liquidation was first ordered, or (b) the date on which notice of initiation of the investigation was published. The Department preliminarily finds that critical circumstances exist for imports of subject merchandise from the PRC-wide entity, as discussed above.

In accordance with section 733(e)(2)(A) of the Act, the suspension of liquidation shall apply to all unliquidated entries of merchandise from the producer/exporter combinations identified in this paragraph that were entered, or withdrawn from warehouse, for consumption on or after the date which is 90 days before the publication of this notice.

To determine the cash deposit rate, the Department normally adjusts the estimated weighted-average dumping margin by the amount of domestic subsidy pass-through and export subsidies determined in a companion CVD proceeding when CVD provisional measures are in effect. Accordingly, where the Department has made a preliminary affirmative determination for domestic subsidy pass-through or export subsidies, the Department has offset the calculated estimated weighted-average dumping margin by the appropriate rate(s). Any such adjusted rates may be found in the Preliminary Determination Section's chart of estimated weighted-average dumping margins above.

Should provisional measures in the companion CVD investigation expire prior to the expiration of provisional measures in this LTFV investigation, the Department will direct CBP to begin collecting cash deposits at a rate equal to the estimated weighted-average dumping margins calculated in this preliminary determination unadjusted for the passed-through domestic subsidies or for export subsidies at the time the CVD provisional measures expire.

These suspension of liquidation instructions will remain in effect until further notice.

Disclosure

The Department intends to disclose to interested parties the calculations performed in connection with this preliminary determination within five days of its public announcement or, if there is no public announcement, within five days of the date of publication of this notice in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, the Department intends to verify information provided by mandatory respondent Linyi Chengen Import and Export Co., Ltd. that it relied upon in making its final determination. Because mandatory respondent Shandong Dongfang Bayley Wood Co., Ltd. did not provide information requested by the Department and the Department preliminarily determines that it has been uncooperative, verification will not be conducted for Shandong Dongfang Bayley Wood Co., Ltd.

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last final verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs.^[10] Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this investigation are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, the Department intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Final Determination

Section 735(a)(1) of the Act and 19 CFR 351.210(b)(1) provide that the Department will issue the final determination within 75 days after the date of its preliminary determination. Accordingly, the Department will make its final determination no later than 75 days after the signature date of this preliminary determination.

International Trade Commission Notification

In accordance with section 733(f) of the Act, the Department will notify the International Trade Commission (ITC) of its preliminary determination of sales at LTFV. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether imports of the subject merchandise are materially injuring, or Start Printed Page 28638threaten material injury to, the U.S. industry.

Notification to Interested Parties

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).

Start SignatureEnd Signature

Appendix I

Scope of the Investigation

The merchandise subject to this investigation is hardwood and decorative plywood, and certain veneered panels as described below. For purposes of this proceeding, hardwood and decorative plywood is defined as a generally flat, multilayered plywood or other veneered panel, consisting of two or more layers or plies of wood veneers and a core, with the face and/or back veneer made of non-coniferous wood (hardwood) or bamboo. The veneers, along with the core may be glued or otherwise bonded together. Hardwood and decorative plywood may include products that meet the American National Standard for Hardwood and Decorative Plywood, ANSI/HPVA HP-1-2016 (including any revisions to that standard).

For purposes of this investigation a “veneer” is a slice of wood regardless of thickness which is cut, sliced or sawed from a log, bolt, or flitch. The face and back veneers are the outermost veneer of wood on either side of the core irrespective of additional surface coatings or covers as described below.

The core of hardwood and decorative plywood consists of the layer or layers of one or more material(s) that are situated between the face and back veneers. The core may be composed of a range of materials, including but not limited to hardwood, softwood, particleboard, or medium-density fiberboard (MDF).

All hardwood plywood is included within the scope of this investigation regardless of whether or not the face and/or back veneers are surface coated or covered and whether or not such surface coating(s) or covers obscures the grain, textures, or markings of the wood. Examples of surface coatings and covers include, but are not limited to: Ultra violet light cured polyurethanes; oil or oil-modified or water based polyurethanes; wax; epoxy-ester finishes; moisture-cured urethanes; paints; stains; paper; aluminum; high pressure laminate; MDF; medium density overlay (MDO); and phenolic film. Additionally, the face veneer of hardwood plywood may be sanded; smoothed or given a “distressed” appearance through such methods as hand-scraping or wire brushing. All hardwood plywood is included within the scope even if it is trimmed; cut-to-size; notched; punched; drilled; or has underwent other forms of minor processing.

All hardwood and decorative plywood is included within the scope of this investigation, without regard to dimension (overall thickness, thickness of face veneer, thickness of back veneer, thickness of core, thickness of inner veneers, width, or length). However, the most common panel sizes of hardwood and decorative plywood are 1219 x 1829 mm (48 x 72 inches), 1219 x 2438 mm (48 x 96 inches), and 1219 x 3048 mm (48 x 120 inches).

Subject merchandise also includes hardwood and decorative plywood that has been further processed in a third country, including but not limited to trimming, cutting, notching, punching, drilling, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope product.

The scope of the investigation excludes the following items: (1) Structural plywood (also known as “industrial plywood” or “industrial panels”) that is manufactured to meet U.S. Products Standard PS 1-09, PS 2-09, or PS 2-10 for Structural Plywood (including any revisions to that standard or any substantially equivalent international standard intended for structural plywood), and which has both a face and a back veneer of coniferous wood; (2) products which have a face and back veneer of cork; (3) multilayered wood flooring, as described in the antidumping duty and countervailing duty orders on Multilayered Wood Flooring from the People's Republic of China, Import Administration, International Trade Administration. See Multilayered Wood Flooring from the People's Republic of China, 76 FR 76690 (December 8, 2011) (amended final determination of sales at less than fair value and antidumping duty order), and Multilayered Wood Flooring from the People's Republic of China, 76 FR 76693 (December 8, 2011) (countervailing duty order), as amended by Multilayered Wood Flooring from the People's Republic of China: Amended Antidumping and Countervailing Duty Orders, 77 FR 5484 (February 3, 2012); (4) multilayered wood flooring with a face veneer of bamboo or composed entirely of bamboo; (5) plywood which has a shape or design other than a flat panel, with the exception of any minor processing described above; (6) products made entirely from bamboo and adhesives (also known as “solid bamboo”); and (7) Phenolic Film Faced Plyform (PFF), also known as Phenolic Surface Film Plywood (PSF), defined as a panel with an “Exterior” or “Exposure 1” bond classification as is defined by The Engineered Wood Association, having an opaque phenolic film layer with a weight equal to or greater than 90g/m3 permanently bonded on both the face and back veneers and an opaque, moisture resistant coating applied to the edges.

Excluded from the scope of this investigation are wooden furniture goods that, at the time of importation, are fully assembled and are ready for their intended uses. Also excluded from the scope of this investigation is “ready to assemble” (“RTA”) furniture. RTA furniture is defined as (A) furniture packaged for sale for ultimate purchase by an end-user that, at the time of importation, includes (1) all wooden components (in finished form) required to assemble a finished unit of furniture, (2) all accessory parts (e.g., screws, washers, dowels, nails, handles, knobs, adhesive glues) required to assemble a finished unit of furniture, and (3) instructions providing guidance on the assembly of a finished unit of furniture; (B) unassembled bathroom vanity cabinets, having a space for one or more sinks, that are imported with all unassembled hardwood and hardwood plywood components that have been cut-to-final dimensional component shape/size, painted or stained prior to importation, and stacked within a singled shipping package, except for furniture feet which may be packed and shipped separately; or (C) unassembled bathroom vanity linen closets that are imported with all unassembled hardwood and hardwood plywood components that have been cut-to-final dimensional shape/size, painted or stained prior to importation, and stacked within a single shipping package, except for furniture feet which may be packed and shipped separately.

Excluded from the scope of this investigation are kitchen cabinets that, at the time of importation, are fully assembled and are ready for their intended uses. Also excluded from the scope of this investigation are RTA kitchen cabinets. RTA kitchen cabinets are defined as kitchen cabinets packaged for sale for ultimate purchase by an end-user that, at the time of importation, includes (1) all wooden components (in finished form) required to assemble a finished unit of cabinetry, (2) all accessory parts (e.g., screws, washers, dowels, nails, handles, knobs, hooks, adhesive glues) required to assemble a finished unit of cabinetry, and (3) instructions providing guidance on the assembly of a finished unit of cabinetry.

Excluded from the scope of this investigation are finished table tops, which are table tops imported in finished form with pre-cut or drilled openings to attach the underframe or legs. The table tops are ready for use at the time of import and require no further finishing or processing.

Excluded from the scope of this investigation are finished countertops that are imported in finished form and require no further finishing or manufacturing.

Excluded from the scope of this investigation are laminated veneer lumber door and window components with (1) a maximum width of 44 millimeters, a thickness from 30 millimeters to 72 millimeters, and a length of less than 2413 millimeters (2) water boiling point exterior adhesive, (3) a modulus of elasticity of 1,500,000 pounds per square inch or higher, (4) finger-jointed or lap-jointed core veneer with all layers oriented so that the grain is running parallel or with no more than 3 dispersed layers of veneer oriented with the grain running perpendicular to the other layers; and (5) top layer machined with a curved edge and one or more profile channels throughout.

Imports of hardwood plywood are primarily entered under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 4412.10.0500; 4412.31.0520; 4412.31.0540; 4412.31.0560; 4412.31.0620; 4412.31.0640; 4412.31.0660; Start Printed Page 286394412.31.2510; 4412.31.2520; 4412.31.2610; 4412.31.2620; 4412.31.4040; 4412.31.4050; 4412.31.4060; 4412.31.4075; 4412.31.4080; 4412.31.4140; 4412.31.4150; 4412.31.4160; 4412.31.4180; 4412.31.5125; 4412.31.5135; 4412.31.5155; 4412.31.5165; 4412.31.5175; 4412.31.5235; 4412.31.5255; 4412.31.5265; 4412.31.5275; 4412.31.6000; 4412.31.6100; 4412.31.9100; 4412.31.9200; 4412.32.0520; 4412.32.0540; 4412.32.0565; 4412.32.0570; 4412.32.0620; 4412.32.0640; 4412.32.0670; 4412.32.2510; 4412.32.2525; 4412.32.2530; 4412.32.2610; 4412.32.2630; 4412.32.3125; 4412.32.3135; 4412.32.3155; 4412.32.3165; 4412.32.3175; 4412.32.3185; 4412.32.3235; 4412.32.3255; 4412.32.3265; 4412.32.3275; 4412.32.3285; 4412.32.5600; 4412.32.3235; 4412.32.3255; 4412.32.3265; 4412.32.3275; 4412.32.3285; 4412.32.5700; 4412.94.1030; 4412.94.1050; 4412.94.3105; 4412.94.3111; 4412.94.3121; 4412.94.3141; 4412.94.3161; 4412.94.3175; 4412.94.4100; 4412.99.0600; 4412.99.1020; 4412.99.1030; 4412.99.1040; 4412.99.3110; 4412.99.3120; 4412.99.3130; 4412.99.3140; 4412.99.3150; 4412.99.3160; 4412.99.3170; 4412.99.4100; 4412.99.5115; and 4412.99.5710.

Imports of hardwood plywood may also enter under HTSUS subheadings 4412.39.4011; 4412.39.4012; 4412.39.4019; 4412.39.4031; 4412.39.4032; 4412.39.4039; 4412.39.4051; 4412.39.4052; 4412.39.4059; 4412.39.4061; 4412.39.4062; 4412.39.4069; 4412.39.5010; 4412.39.5030; 4412.39.5050; 4412.99.6000; 4412.99.7000; 4412.99.8000; 4412.99.9000; 4412.10.9000; 4412.94.5100; 4412.94.9500; and 4412.99.9500. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Period of Investigation

IV. Scope Comments

V. Selection of Respondents

VI. Preliminary Determination of Critical Circumstances, In Part

VII. Scope of the Investigation

VIII. Discussion of the Methodology

A. Non-Market Economy Country

B. Surrogate Country and Surrogate Values Comments

C. Separate Rates

D. Combination Rates

E. Affiliation

F. The PRC-wide Entity

G. Application of Facts Available and Adverse Inferences

H. Date of Sale

I. Comparisons to Fair Value

IX. Currency Conversion

X. Export Subsidy Adjustment

XI. Adjustment Under Section 777(A)(F) of the Act

XII. Disclosure and Public Comment

XIII. Verification

XIV. Conclusion

End Supplemental Information

Footnotes