Skip to Content


Agency Information Collection Activities; Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for Bicycle Helmets

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Enhanced Content

Relevant information about this document from provides additional context. This information is not part of the official Federal Register document.

Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble


Consumer Product Safety Commission.




In accordance with the requirements of the Paperwork Reduction Act (PRA) of 1995, the Consumer Product Safety Commission (Commission or CPSC) invites comments on a proposed request for extension of approval of a collection of information relating to the Safety Standard for Bicycle Helmets (OMB No. 3041-0127). The Commission will consider all comments received in response to this notice before requesting an extension of approval of this collection of information from the Office of Management and Budget (OMB).


The Office of the Secretary must receive comments not later than September 19, 2017.


You may submit comments, identified by Docket No. CPSC-2010-0056, by any of the following methods:

Electronic Submissions: Submit electronic comments to the Federal eRulemaking Portal at: Follow the instructions for submitting comments. The Commission does not accept comments submitted by electronic mail (email), except through The Commission encourages you to submit electronic comments by using the Federal eRulemaking Portal, as described above.

Written Submissions: Submit written submissions by mail/hand delivery/courier to: Office of the Secretary, Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814; telephone (301) 504-7923.

Instructions: All submissions received must include the agency name and docket number for this notice. All comments received may be posted without change, including any personal identifiers, contact information, or other personal information provided, to: Do not submit confidential business information, trade secret information, or other sensitive or protected information that you do not want to be available to the public. If furnished at all, such information should be submitted in writing.

Docket: For access to the docket to read background documents or comments received, go to:, and insert the docket number CPSC-2010-0056, into the “Search” box, and follow the prompts.

Start Further Info


For further information contact: Charu Krishnan, Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814; (301) 504-7221, or by email to:

End Further Info End Preamble Start Supplemental Information


CPSC seeks to renew the following collection of information:

Title: Safety Standard for Bicycle Helmets.

OMB Number: 3041-0127.

Type of Review: Renewal of collection.

Frequency of Response: On occasion.

Affected Public: Manufacturers and importers of bicycle helmets.

Estimated Number of Respondents: 38 manufacturers and importers will maintain test records of an estimated 200 models total annually, including older models and new models. Testing on bicycle helmets must be conducted for each new production lot and the test records must be maintained for 3 years.

Estimated Time per Response: 200 hours/model to test 40 new models (including new prototypes) and an estimated 100 hours/model to test new production lots of 160 older models. Additionally, manufacturers and importers may require 4 hours annually per model for recordkeeping for approximately 200 models.

Total Estimated Annual Burden: 24,800 hours (24,000 hours for testing and 800 hours for recordkeeping).

General Description of Collection: In 1998, the Commission issued a safety standard for bicycle helmets (16 CFR part 1203). The standard includes requirements for labeling and instructions. The standard also requires that manufacturers and importers of bicycle helmets subject to the standard issue certificates of compliance based on a reasonable testing program. Every person issuing certificates of compliance must maintain certain records. Respondents must comply with the requirements in 16 CFR part 1203 for labeling and instructions, testing, certification, and recordkeeping.

Request for Comments

The Commission solicits written comments from all interested persons about the proposed collection of information. The Commission specifically solicits information relevant to the following topics:Start Printed Page 33876

  • Whether the collection of information described above is necessary for the proper performance of the Commission's functions, including whether the information would have practical utility;
  • Whether the estimated burden of the proposed collection of information is accurate;
  • Whether the quality, utility, and clarity of the information to be collected could be enhanced; and
  • Whether the burden imposed by the collection of information could be minimized by use of automated, electronic or other technological collection techniques, or other forms of information technology.
Start Signature

Dated: July 17, 2017.

Todd A. Stevenson,

Secretary, Consumer Product Safety Commission.

End Signature End Supplemental Information

[FR Doc. 2017-15277 Filed 7-20-17; 8:45 am]