Skip to Content

During the funding lapse, Federalregister.gov is not being supported. If data feeds are not available from GPO, FederalRegister.gov will not be updated, so please use the official edition of the Federal Register on Govinfo (https://www.govinfo.gov/app/collection/fr). If there is a technical issue with the Public Inspection List, you can view the documents on public inspection at our office in Washington, DC or on archives.gov.

Notice

MET Laboratories, Inc.: Application for Expansion of Recognition and Proposed Modification to the NRTL Program's List of Appropriate Test Standards

Document Details

Information about this document as published in the Federal Register.

Document Statistics
Document page views are updated periodically throughout the day and are cumulative counts for this document including its time on Public Inspection. Counts are subject to sampling, reprocessing and revision (up or down) throughout the day.
Published Document

This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.

Start Preamble

AGENCY:

Occupational Safety and Health Administration (OSHA), Labor.

ACTION:

Notice.

SUMMARY:

In this notice, OSHA announces the application of MET Laboratories, Inc., for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the Agency's preliminary finding to grant the application. Additionally, OSHA proposes to add one new test standard to the NRTL Program's List of Appropriate Test Standards.

DATES:

Submit comments, information, and documents in response to this notice, or requests for an extension of time to make a submission, on or before August 8, 2018.

ADDRESSES:

Submit comments by any of the following methods:

Electronically: Submit comments and attachments electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for making electronic submissions.

Facsimile: If submissions, including attachments, are not longer than 10 pages, commenters may fax them to the OSHA Docket Office at (202) 693-1648.

Regular or express mail, hand delivery, or messenger (courier) service: Submit comments, requests, and any attachments to the OSHA Docket Office, Docket No. OSHA-2006-0028, Technical Data Center, U.S. Department of Labor, 200 Constitution Avenue NW, Room N-3653, Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-5627). Note that security procedures may result in significant delays in receiving comments and other written materials by regular mail. Contact the OSHA Docket Office for information about security procedures concerning delivery of materials by express mail, hand delivery, or messenger service. The hours of operation for the OSHA Docket Office are 10:00 a.m.-3:00 p.m., ET.

Instructions: All submissions must include the agency name and the OSHA docket number (OSHA-2006-0028). OSHA places comments and other materials, including any personal information, in the public docket without revision, and these materials will be available online at http://www.regulations.gov. Therefore, the agency cautions commenters about submitting statements they do not want made available to the public, or submitting comments that contain personal information (either about themselves or others) such as Social Security numbers, birth dates, and medical data.

Docket: To read or download submissions or other material in the docket, go to http://www.regulations.gov or the OSHA Docket Office at the above address. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the website. All submissions, including copyrighted material, are available for inspection at the OSHA Docket Office. Contact the OSHA Docket Office for assistance in locating docket submissions.

Extension of comment period: Submit requests for an extension of the comment period on or before August 8, 2018 to the Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW, Room N-3653, Washington, DC 20210, or by fax to (202) 693-1644.

Start Further Info

FOR FURTHER INFORMATION CONTACT:

Information regarding this notice is available from the following sources:

Press inquiries: Contact Mr. Frank Meilinger Director, OSHA Office of Communications, phone: (202) 693-Start Printed Page 350271999 or email: meilinger.francis2@dol.gov.

General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, phone: (202) 693-2110 or email: robinson.kevin@dol.gov.

End Further Info End Preamble Start Supplemental Information

SUPPLEMENTARY INFORMATION:

I. Notice of the Application for Expansion

The Occupational Safety and Health Administration is providing notice that MET Laboratories, Inc. (MET), is applying for expansion of its current recognition as a NRTL. MET requests the addition of one test standard to its NRTL scope of recognition.

OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition. Each NRTL's scope of recognition includes (1) the type of products the NRTL may test, with each type specified by its applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.

The Agency processes applications by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding. In the second notice, the Agency provides a final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including MET, which details the NRTL's scope of recognition. These pages are available from the OSHA website at http://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

MET currently has one facility (site) recognized by OSHA for product testing and certification, with its headquarters located at: MET Laboratories, Inc., 914 West Patapsco Avenue, Baltimore, Maryland 21230. A complete list of MET's scope of recognition is available at https://www.osha.gov/​dts/​otpca/​nrtl/​met.html.

II. General Background on the Application

MET submitted an application, dated January 29, 2016 (OSHA-2006-0028-0046), to expand its recognition to include one additional test standard. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

Table 1, below, lists the appropriate test standard found in MET's application for expansion for testing and certification of products under the NRTL Program.

Table 1—Proposed Appropriate Test Standard for Inclusion in MET's NRTL Scope of Recognition

Test standardTest standard title
UL 1598C *Standard for Light Emitting Diode (LED) Retrofit Luminaire Conversion Kits.
* Represents the standard that OSHA proposes to add to the NRTL Program's List of Appropriate Test Standards.

III. Proposal To Add New Test Standard to the NRTL Program's List of Appropriate Test Standards

Periodically, OSHA will propose to add new test standards to the NRTL list of appropriate test standards following an evaluation of the test standard document. To qualify as an appropriate test standard, the Agency evaluates the document to (1) verify it represents a product category for which OSHA requires certification by a NRTL, (2) verify the document represents an end product and not a component, and (3) verify the document defines safety test specifications (not installation or operational performance specifications). OSHA becomes aware of new test standards through various avenues. For example, OSHA may become aware of new test standards by: (1) Monitoring notifications issued by certain Standards Development Organizations; (2) reviewing applications by NRTLs or applicants seeking recognition to include new test standards in their scopes of recognition; and (3) obtaining notification from manufacturers, manufacturing organizations, government agencies, or other parties. OSHA may determine to include a new test standard in the list, for example, if the test standard is for a particular type of product that another test standard also covers or it covers a type of product that no standard previously covered.

In this notice, OSHA proposes to add one new test standard to the NRTL Program's List of Appropriate Test Standards. Table 2, below, lists the test standard that is new to the NRTL Program. OSHA preliminarily determined that this test standard is an appropriate test standard and proposes to include it in the NRTL Program's List of Appropriate Test Standards. OSHA seeks public comment on this preliminary determination.

Table 2—Test Standard OSHA Is Proposing To Add to the NRTL Program's List of Appropriate Test Standards

Test standardTest standard title
UL 1598C *Standard for Light Emitting Diode (LED) Retrofit Luminaire Conversion Kits.

III. Preliminary Findings on the Application

MET submitted an acceptable application for expansion of its scope of recognition. OSHA's review of the application file, and pertinent documentation, indicate that MET can meet the requirements prescribed by 29 CFR 1910.7 for expanding its recognition to include the addition of this one test standard for NRTL testing and certification listed in Table 2. This preliminary finding does not constitute an interim or temporary approval of MET's application.

OSHA welcomes public comment as to whether MET meets the requirements of 29 CFR 1910.7 for expansion of its recognition as a NRTL. Comments should consist of pertinent written documents and exhibits. Commenters needing more time to comment must submit a request in writing, stating the reasons for the request. Commenters must submit the written request for an extension by the due date for comments. OSHA will limit any extension to 10 days unless the requester justifies a longer period. OSHA may deny a request for an extension if the request is not adequately justified. To obtain or review copies of the exhibits identified in this notice, as well as comments submitted to the docket, contact the Docket Office, at the above address. These materials also are available online at http://www.regulations.gov under Docket No. OSHA-2006-0028.

OSHA staff will review all comments to the docket submitted in a timely manner and, after addressing the issues Start Printed Page 35028raised by these comments, will make a recommendation to the Assistant Secretary for Occupational Safety and Health whether to grant MET's application for expansion of its scope of recognition. The Assistant Secretary will make the final decision on granting the application. In making this decision, the Assistant Secretary may undertake other proceedings prescribed in Appendix A to 29 CFR 1910.7.

OSHA will publish a public notice of its final decision in the Federal Register.

IV. Authority and Signature

Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.

Start Signature

Signed at Washington, DC, on July 18, 2018.

Loren Sweatt,

Deputy Assistant Secretary of Labor for Occupational Safety and Health.

End Signature End Supplemental Information

[FR Doc. 2018-15773 Filed 7-23-18; 8:45 am]

BILLING CODE 4510-26-P