This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Notice
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
1,161
as of
10/16/2026 at 6:15 pm EDT
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2020-04745 as it appeared on Public Inspection on
03/06/2020 at 8:45 am.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2020-04745 (85 FR 13625)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY:
As a result of the determination by the Department of Commerce (Commerce) and the International Trade Commission (ITC) that revocation of the antidumping duty order on certain steel threaded rod (steel threaded rod) from the People's Republic of China (China) would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, Commerce is publishing a notice of continuation of the antidumping duty order.
DATES:
Applicable March 9, 2020.
FOR FURTHER INFORMATION CONTACT:
Benito Ballesteros, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-7425.
SUPPLEMENTARY INFORMATION:
Background
On July 1, 2019, Commerce published the notice of initiation of the second sunset review of the antidumping duty order [1]
on steel threaded rod from China, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).[2]
Commerce conducted this sunset review on an expedited basis, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), because it received a complete, timely, and adequate response from domestic interested parties,[3]
but no substantive response from respondent interested parties. As a result of its review, Commerce determined that revocation of the
Order
would likely lead to continuation or recurrence of dumping. Commerce also notified the ITC of the magnitude of the dumping margins likely to prevail should the
Order
be revoked.[4]
On February 26, 2020, the ITC published its determination, pursuant to section 751(c) of the Act, that revocation of the
Order
would likely lead to a continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.[5]
Scope of the Order
The merchandise covered by the
Order
is steel threaded rod. Steel threaded rod is certain threaded rod, bar, or studs, of carbon quality steel, having a solid, circular cross section, of any diameter, in any straight length, that have been forged, turned, cold-drawn, cold-rolled, machine straightened, or otherwise cold-finished, and into which threaded grooves have been applied. In addition, the steel threaded rod, bar, or studs subject to the order are non-headed and threaded along greater than 25 percent of their total length. A variety of finishes or coatings, such as plain oil finish as a temporary rust protectant, zinc coating (
i.e.,
galvanized, whether by electroplating or hot-dipping), paint, and other similar finishes and coatings, may be applied to the merchandise.
Included in the scope of the order are steel threaded rod, bar, or studs, in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
1.50 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.012 percent of boron, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.41 percent of titanium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
Steel threaded rod is currently classifiable under subheadings 7318.15.5051, 7318.15.5056, 7318.15.5090, and 7318.15.2095 of the United States Harmonized Tariff Schedule (HTSUS). Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the merchandise is dispositive.
Excluded from the scope of the order are: (a) Threaded rod, bar, or studs which are threaded only on one or both ends and the threading covers 25 percent or less of the total length; and (b) threaded rod, bar, or studs made to American Society for Testing and Materials (ASTM) A193 Grade B7, ASTM A193 Grade B7M, ASTM A193 Grade B16, or ASTM A320 Grade L7.
Continuation of the Order
As a result of the determinations by Commerce and the ITC that revocation of the
Order
would likely lead to a continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to sections 751(c) and 751(d)(2) of the Act, Commerce hereby orders the continuation of the
Order
on steel threaded rod from China. U.S. Customs and Border Protection will continue to collect antidumping duty cash deposits at the rates in effect at the time of entry for all imports of subject merchandise.
The effective date of the continuation of the
Order
will be the date of publication in the
Federal Register
of this notice of continuation. Pursuant to section 751(c)(2) of the Act and 19 CFR
( printed page 13626)
351.218(a), Commerce intends to initiate the next sunset review of the order not later than 30 days prior to the fifth anniversary of the effective date of continuation.
Notification to Interested Parties
This five-year sunset review and this notice are in accordance with section 751(c) of the Act and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4).
Dated: March 3, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.
Footnotes
1.
See Certain Steel Threaded Rod from the People's Republic of China: Notice of Antidumping Duty Order,74 FR 17154 (April 14, 2009) (
Order).
3.
The domestic interested party is Vulcan Threaded Products, Inc. (Vulcan).
See
Vulcan's Letter, “Certain Steel Threaded Rod from the People's Republic of China, Second Sunset Review: Substantive Response to Notice of Initiation,” dated July 31, 2019.
4.
See Certain Steel Threaded Rod from the People's Republic of China: Final Results of the Expedited Sunset Review of the Antidumping Duty Order,84 FR 65780 (November 29, 2019).
5.
See Steel Threaded Rod from China,85 FR 11101 (February 26, 2020);
see also Steel Threaded Rod from China,
Inv. No. 731-TA-1145 (Second Review), USITC Pub. 5019, dated February 2020.