This site displays a prototype of a “Web 2.0” version of the daily
Federal Register. It is not an official legal edition of the Federal
Register, and does not replace the official print version or the official
electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal
Register documents. Each document posted on the site includes a link to the
corresponding official PDF file on govinfo.gov. This prototype edition of the
daily Federal Register on FederalRegister.gov will remain an unofficial
informational resource until the Administrative Committee of the Federal
Register (ACFR) issues a regulation granting it official legal status.
For complete information about, and access to, our official publications
and services, go to
About the Federal Register
on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable
regulatory information on FederalRegister.gov with the objective of
establishing the XML-based Federal Register as an ACFR-sanctioned
publication in the future. While every effort has been made to ensure that
the material on FederalRegister.gov is accurately displayed, consistent with
the official SGML-based PDF version on govinfo.gov, those relying on it for
legal research should verify their results against an official edition of
the Federal Register. Until the ACFR grants it official status, the XML
rendition of the daily Federal Register on FederalRegister.gov does not
provide legal notice to the public or judicial notice to the courts.
Rule
Enter a search term or FR citation e.g.
88 FR 38230 FR 78782024-13208USDA09/05/24RULE0503-AA39SORN
Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Choosing an item from
suggestions
will bring you directly to the content.
Thank you for taking the time to create a comment. Your input is important.
Once you have filled in the required fields below you can preview and/or submit your comment to the Transportation Department for review. All comments are considered public and will be posted online once the Transportation Department has reviewed them.
This table of contents is a navigational tool, processed from the
headings within the legal text of Federal Register documents.
This repetition of headings to form internal navigation links
has no substantive legal effect.
FederalRegister.gov retrieves relevant information about this document
from Regulations.gov to provide users with additional context. This
information is not part of the official Federal Register document.
Document page views are updated periodically throughout the day and are
cumulative counts for this document. Counts are subject to sampling,
reprocessing and revision (up or down) throughout the day.
Page views
170
as of
11/18/2026 at 12:15 pm EST
Other Formats
Enhanced Content - Other Formats
This document is also available in the following formats:
This PDF is FR Doc. 2020-16989 as it appeared on Public Inspection on
08/04/2020 at 8:45 am.
If you are using public inspection listings for legal research, you
should verify the contents of the documents against a final, official
edition of the Federal Register. Only official editions of the
Federal Register provide legal notice of publication to the public and judicial notice
to the courts under 44 U.S.C. 1503 & 1507.
Learn more here.
Published Document: 2020-16989 (85 FR 47295)
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
AGENCY:
Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Models PC-6, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, PC-6/C1-H2, PC-6-H1, and PC-6-H2 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as rudder shaft assemblies with incorrect rivet configurations. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective September 9, 2020.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in the AD as of September 9, 2020.
ADDRESSES:
For service information identified in this AD, contact Pilatus Aircraft Ltd., Customer Technical Support (MCC), P.O. Box 992, CH-6371 Stans, Switzerland; phone: +41 (0)41 619 67 74; fax: +41 (0)41 619 67 73; email:
techsupport@pilatus-aircraft.com;
internet:
https://www.pilatus-aircraft.com.
You may view this referenced service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329-4148. It is also available on the internet at
https://www.regulations.gov
by
( printed page 47296)
searching for and locating Docket No. FAA-2019-0536.
Examining the AD Docket
You may examine the AD docket on the internet at
https://www.regulations.gov
by searching for and locating Docket No. FAA-2019-0536; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the NPRM, any comments received, and other information. The street address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to Pilatus Aircraft Ltd. Models PC-6, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, PC-6/C1-H2, PC-6-H1, and PC-6-H2 airplanes. The NPRM was published in the
Federal Register
on July 5, 2019 (84 FR 32099). The NPRM proposed to correct an unsafe condition for the specified products and was based on AD No. 2018-0222, dated October 19, 2018, issued by the European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community (referred to after this as “the MCAI”). The MCAI states:
During a recent check flight with a PC-6, the pilot experienced loss of rudder control. The consequent precautionary landing resulted in a runway excursion and damage to the aeroplane, but without serious injuries to the occupants. The post-event inspection of the affected rudder shaft assembly found an incorrect rivet configuration. Subsequent investigation results identified that the tapered pins had been replaced with an insufficient quantity of rivets of unknown origin, which effectively constituted a modification that does not conform to any of the three different Pilatus-approved configurations. Prompted by this event, five more aeroplanes were inspected and various non-standard rivet configurations were found in the same area. It cannot be excluded that more PC-6 aeroplanes have had a similar modification applied.
This condition, if not detected and corrected, could lead to failure or loss of rivets, possibly resulting in reduced control of the aeroplane.
To address this potential unsafe condition, Pilatus Aircraft Ltd issued the [service bulletin] SB to provide inspection instructions.
For the reasons described above, this [EASA] AD requires a one-time inspection of the affected part to determine the rivet configuration and, depending on findings, accomplishment of applicable corrective action(s). This [EASA] AD also requires inspection of affected parts held as spare, and depending on findings, corrective action(s), prior to installation.
You may examine the MCAI on the internet at
https://www.regulations.gov
by searching for and locating Docket No. FAA-2019-0536.
Comments
The FAA gave the public the opportunity to participate in developing this AD. The FAA received no comments on the NPRM or on the determination of the cost to the public.
Conclusion
The FAA reviewed the relevant data and determined that air safety and the public interest require adopting the AD as proposed.
The FAA reviewed Pilatus PC-6 Service Bulletin No. 27-006, Rev. No. 1, dated September 4, 2018. The service information contains procedures for inspecting the rivet configuration on the rudder shaft assembly for size, quantity, location, and type and contacting Pilatus to obtain repair instructions if any discrepancies are found. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the
ADDRESSES
section.
Costs of Compliance
The FAA estimates that this AD will affect 30 products of U.S. registry. The FAA also estimates that it will take about 7 work-hours per product to comply with the inspection requirement of this AD. The average labor rate is $85 per work-hour.
Based on these figures, the FAA estimates the cost of this AD on U.S. operators to be $17,850, or $595 per product.
Since the repair instructions could vary significantly from airplane to airplane if discrepancies are found during the inspections, the FAA has no way of determining the number of products that may need follow-on actions or what the cost per product would be.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
The FAA determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify this AD:
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
This AD applies to Pilatus Aircraft Ltd. (Pilatus) Models PC-6, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, PC-6/C1-H2, PC-6-H1, and PC-6-H2 airplanes, all serial numbers, certificated in any category.
Note 1 to paragraph (c) of this AD:
These airplanes may also be identified as Fairchild Republic Company airplanes, Fairchild Heli Porter airplanes, or Fairchild-Hiller Corporation airplanes.
(d) Subject
Air Transport Association of America (ATA) Code 55: Stabilizers.
(e) Reason
This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as rudder shaft assemblies with incorrect rivet configuration. The FAA is issuing this AD to prevent rudder shaft assembly failure, which could result in reduced control of the airplane.
(f) Actions and Compliance
Unless already done, do the following actions in paragraphs (f)(1) and (2) of this AD:
(1) Within the next 100 hours time-in-service after September 9, 2020 (the effective date of this AD) or within the next 12 months after September 9, 2020 (the effective date of this AD), whichever occurs first, inspect the rudder shaft assembly for proper rivet configuration and repair any discrepancies before further flight in accordance with the Accomplishment Instructions—Part 1, paragraph 3.B. and table 1, of Pilatus PC-6 Service Bulletin No: 27-006, Rev. No. 1, dated September 4, 2018.
(2) After September 9, 2020 (the effective date of this AD), do not install a rudder shaft assembly on any airplane unless it has been inspected in accordance with paragraph (f)(1) of this AD and found to be free of discrepancies or all discrepancies have been repaired or replaced.
(g) Alternative Methods of Compliance (AMOCs)
The Manager, Small Airplane Standards Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Standards Branch, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; fax: (816) 329-4090; email:
doug.rudolph@faa.gov.
Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO.
(h) Related Information
Refer to MCAI European Aviation Safety Agency AD No. 2018-0222, dated October 19, 2018, for related information. The MCAI can be found in the AD docket on the internet at:
https://www.regulations.gov
by searching for and locating Docket No. FAA-2019-0536.
(i) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise.
(i) Pilatus PC-6 Service Bulletin No: 27-006, Rev. No. 1, dated September 4, 2018.
(ii) [Reserved]
(3) For service information identified in this AD, contact Pilatus Aircraft Ltd., Customer Technical Support (MCC), P.O. Box 992, CH-6371 Stans, Switzerland; phone: +41 (0)41 619 67 74; fax: +41 (0)41 619 67 73; email:
techsupport@pilatus-aircraft.com;
internet:
https://www.pilatus-aircraft.com.
(4) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, Airworthiness Products Section, 901 Locust, Kansas City, Missouri 64106. For information on the availability of this material at the FAA, call (816) 329-4148. It is also available on the internet at
https://www.regulations.gov
by searching for and locating Docket No. FAA-2019-0536.
Comments on this document are being accepted at Regulations.gov. Submit a public comment